Fender Tone Master Pro - Let's Check Out SWITCH LINK! 

Glad it was helpful!

Thank you for watching!

I appreciate that!

You're very welcome!

Thank you for that wonderful comment, i really appreciate it!

Thank you! Will do!

Glad you enjoyed it 👍

Very welcome!

Thanks, Sheldon!

Thank you so much!

Indeed 👍

I have a new "Limelight" preset that has 6 scenes. I switch between 2 amps and use the same effects with both amps. I'll put it on the Cloud right now.

I haven't tried it with Songs mode, so I really can't say. But i don't see why it wouldn't work tho.

Absolutely! Parameter changes are one of the options. Thanks for the comment!

Vittorio - Vorrei poter fare video in italiano!

Daniel - It's been more than a few years since I last gigged, so I haven't gone thru my TMP to set it up for my old band's setlist. But I'll try to give you a decent answer. I came to the TMP from Fractal, where Snapshots are called Scenes. Same concept tho - you can save up to 8 variations of whatever blocks are in your preset, basically giving you 8 presets within each preset. That flexibility is amazing! If you had more than 5 parameters changing when you switched from Snapshot to Snapshot and you want to replicate that on the TMP, then you will have to use separate Presets saved together in Song mode. But if you only need 1-5 parameter changing per Snapshot, that can be done easily on the TMP. If you've updated to the latest firmware, try preset #12 "Maximus Twin" in the Fender factory set of presets. Go into FS Mode. The bottom row of footswitches are labeled "Clean", "Crunch", "Lead" and "Greasy". You can think of them as Snapshots. Take a look at the footswitch assignments for those footswitches; they turn blocks on or off, they adjust levels, etc. And Fender updated this preset to use Switch Link, so you can switch from Snapshot to Snapshot and everything gets set correctly. I also created a preset called "Doug B's BFG v1.2" that has 8 Snapshots. You can download it from the cloud to see how I set it up. So yes, you can easily create "Intro", "Verse", "Lead", etc. As far as being able to see a number of presets at one time, you should be able to press the FS Mode footswitch again to get back to Presets view, which gives you Bank Up, Bank Down, six Preset footswitches, FS Mode and Tap/Tuner. So you'd select a preset, click on FS Mode, use your Snapshots, click on FS Mode again and select your next preset, and so on. The FS Mode footswitch toggles back and forth from Presets mode to Effects mode. If this isn't how your footswitch layout is set up, click on the gear icon in the upper right, which brings you to the Footswitch Settings panel. "FS Mode: Presets" should be set to 6 PRESETS and "FS Mode: Effects" should be set to 8 EFFECTS. Hope this helps, and thanks for watching!

@@DougBsDigitalDen thank you for the tips. I,too, had the Fractal Unit. I used it from 2011 to 2015 with the propriety floorboard. I sold it when the AX8 came out to minimize my setup. When the Helix came out however, I jumped ship. It was so more intuitive. Hopefully, the TMP's computer editor will become more feature rich over time.

Set the traditional Fender amp as loud and CLEAN as you can get it. Set the tone controls in the middle. Now connect a guitar cable from one of the 1/4" outs on OUTPUT 1 on the TMP and connect the other end to the amp. Plug your guitar into the TMP and have fun - and it'll sound even better if you have 2 amps to connect to, because then you can use the stereo effects!

I'll be having a MIDI-based video coming out this Friday 👍

Yes, absolutely. It's even easier now with Block Settings/Presets 👍

I'm not sure what you mean when you say to "eject the Fender app" - do you mean the Fender icon that shows up on your computer screen when you put your TMP in update mode? When you drag the firmware file on top of the FENDER icon, it will copy the firmware file to the TMP and then will eject itself. Then it will give you the message about "not disconnecting before ejecting", so that's normal. Yes, there is only 1 new preset, "Brit 800".

Yes it is! "Doug B's BFG V1.2"

Which one - the Billy Gibbons preset v1.2 is already on the cloud, but I can upload Switch Link Test 3 if you'd like 👍

@@DougBsDigitalDen Well yes, it would be good 🕺🏽💃🏻

Brian - it sounds like maybe an issue with the Audio setup on the Mac. I'm assuming you tried guitar and it sounded good, yes? And BT sounds good. I just tried the TMP with my DAW as both input and output and it sounds great. You could try BT on your iMac and see if that works. My only suggestion would be to make sure that you have USB 1/2 enabled in the Output Assign panel. Click on the Output for any preset to check these settings.

@@DougBsDigitalDen Thanks so much! I will look at these things in the morning. So kind of you always being there for me.

No it doesn't , but if I understand you correctly, you want be able to turn both ODs and the delay on and off at the same time. You could set up one ON/OFF switch and click on all 3 pedals that you want included.

@@DougBsDigitalDen Not quite. When I hit the first switch, the OD and the delay comes on. Now if I want to stack the other OD I'll step on the second foot switch and I want it to keep the delay turned on. Right now, it turns the delay off and I don't want that.

Ah - set up FS1 to turn on/off OD1 and Delay. Set up FS2 to turn on OD2 only.

Yes it is!

More like scenes than channels

@@DougBsDigitalDen Thank you sir!

Straight to the PA. I have mine connected with XLR cables, but you can use regular 1/4" too.

Mix and match what? Not sure what you mean.

i want two switches. one with the tube screamer on with a tape delay, and one with the tube screamer with the digital delay. and i want to be to go back and forth between the two.