На этот раз неплохо, это еще б куда нешло, только болгарку и помощнее можно использовать, пусть и с оборотами будет чуть меньше, нестрашно, к примеру хотябы взять ту, которая используется под 180-ый диск.
А ещё из шуруповёрта можно сделать миксер. А если к микроволновке приспособить компрессор, можно сделать мини-холодильник. Автор, жду воплощения моих идей
Love the title.(Few people know about this function of the ANGLE GRINDER). It is not a function at all for the grinder, you modified it beyond any practical limits and are operating the saw part well beyond any safe speed a real chainsaw works at, those grinders work at around 10000 rpm's or more. I won't feel bad for this guy or anyone else who attempts this mindless modification and loses his hand, fingers and any other bodily part when the chain comes flying off.
I'm no fan of this either, however, speed is not an issue. Grinders work in the 10-12000 rpm range. Chainsaws work in the exact same range. MS250 has a top speed of 13,000 rpm. No kickback safety, no super secure way to hold it. An electric chainsaw that'd match this in power is not that expensive I wouldn't think, and you'll be safer when you use it, and have a greater chance of sleeping in your bed, not a hospital bed or grave. Worst part of the grave is that if you're not found in the righteousness of Christ, you'll end up in hell. Repent and believe the Gospel.
I have used this attachment. The chain becomes loose and comes of often. But can tell you it is safe if used properly after seeing demo videos. Unlike circular saw blade attachment for grinders this won't lock up or kick badly. Good for light works.
Просто автору некуда девать талант, как монетизация ролика огонь, стало скучно, потратил время с пользой, хорошо когда воображение развито отлично и руки золотые! Красавица!
Я бы не стал этого делать. Нет хорошего хвата, может вырвать при заклинивании цепи. Вот на турбине с большими дисками и большей задней рукояткой может и сойдёт. За рацуху - респект!
As a builder of chainsaws, I must say that I'm no fan of turning RA grinders, or any other tool for that matter into a chainsaw. The modern chainsaw, either in electric or gas engine versions, is a very carefully engineered tool delivering great cutting speed, safety, low vibration, safety, light weight, safety and ergonmics that can NEVER be matched by a DIY device. Even the cheapest consumer grade chainsaw will be better in every category (ESPECIALLY SAFETY) than this contraption, IMHO.
Да, инструменты, особенно режущие требуют жесткого соблюдения правил безопасности, конечности у человека не вырастают, поэтому лучше работать с техничнски заводскими инструментами, безопасность прежде всего ☝️☝️☝️
A few years back, I was walking through Rural King noticed on the clearance rack there was a 16" Remington electric chainsaw (I guess someone bought it and then took it back). I think I paid $35 or so for it about half the price of a new one ( I checked before I bought it). It works great and is great for those little around the house projects and it easier than getting my gas saws out. The point is I gave you a thumbs up for building that saw, but, least for me, I think it better just to go buy one if you want one.
У меня дома есть немка, англичанка и американка и они умеют тоже самое. Так что это умеет не только твоя болгарка но и другие иностранки. И даже русские. Русская у меня раньше была.
I went to Colorado once on a skiing holiday, they do have a lot chainsaws there, I have never seen so many one armed people in all my life, from garage attendants to receptionist. Using a chainsaw is a skill and everyone who intends to use one should take a safety course and use all the protective gear every time they fire the thing up. They are very unforgiving.
@Guy in Colorado, Greetings! , I agree, 100%.. There's no substitute for paying attention.. It seems to be a lost art, for too many people.. . People like to blame a product instead..
Такую же китайскую насадку на Болгарку, продал за 20 $, после того, как попробовал её в "деле"))) Пошёл и купил нормальную цепную электропилу за 40 $))) Отлично пилит и безопасно. Но для контента сойдёт.)))
Ждём видео приготовления борща в бачке унитаза.Название готово:"Мало кто знает об этой функции унитаза".И разливать удобно-тарелку подставил,кнопку нажал и..."Кушать подано,садитесь жрать,пожалуйста!"
Se del manejo de motosierras. Y la verdad muy buena tu Idea y gracias por compartirlo. Esta muy practico para podar los arboles del hogar o hacer unas leña. Saludos desde Vilmer Santiago del Estero Argentina
@@edsnotgod I personally don't think that americans make better tools. But this particular craft lacks of the basic security, the chainbreak. If this person has a method to include that, would be awesome.
Смазка нужна не для смазки зуба, а для смазки направляющей, где движется цепь. Здесь же, смазывается поверхность режущего зуба. И, так как существует центробежная сила, при данном виде смазки, эта... МËРТВОМУ ПРИПАРКА.
Let's see, $140 at the least for a welder and $40 for a ready made elect chainsaw with all the safety features. You're probably right. If I can afford to buy a $140 welder I can probably afford to get a $40 chainsaw that the only labor I need to put into it is taking it out of the packaging.
Thank you - that made me laugh properly! I agree with Big Joe - you should have bumper stickers made up :) I half expect him to weld a car together around a washing machine next and call it a 'New' Function of...either of them.
se me hace buena la implementacion , pero las motosierras son de las herramientas mas peligrosas y por eso tienen algunos detalles de seguridad como el freno ese de retroseso por si se revienta la cadena o se atora
Yes not everyone has money laying around to do it the right way LOL. The "that's dangerous" thinking doesn't come until someone or something gets destroyed LOL.
Posiblemente sirva para salir al paso de momento, pero pienso que es muy peligroso, las herramientas suelen ser nobles para el trabajo adecuado, pero muy peligrososas sino se usan para lo que fuerón diseñadas !
Экстрималам на заметку. У специализированного инструмента, есть стопора при закусывании цепи. Есть удобный хват. Правильная подача масла на шину. В данном девайсе, прямое нарушение ТБ. Сомнительное смазочное действие маслёнки, что будет при минусовой температуре? В какую сторону и как полетит "пила" в момент закусывания цепи? Дай бог без увечий для оператора. И не маловажным являются обороты! У моей макиты, 1200 об.мин
The small tab on the bottom of the housing is a forehead depth gauge.When it kicks back this tab stops the chain from going too deep into your forehead.
Thanks for the wonderful joke. Glad I wasn't drinking something. In fact I'm going to engrave " do not use while reading leo kudej remarks" on all my cups and drinking glasses.
Could be worse: Replace the 4-inch grinding disk with 10 inch circular saw disk. You have to, of course, remove the protector and the handle. I did it, just for the picture. But I would never turn it on. At 10,500 rpm...
@@west_park7993 My father used a 10 inch circular saw on a big grinder. He almos open his stomach using it. When the grinder went to his belly, he let the trigger go, and the disc cought the cable. He was lucky that time.
Toda herramienta es fabricada con especificaciones técnicas propias de cada una de ellas, no es recomendable hacer variaciones de dichas especificaciones, ( muy peligroso) gracias y saludos desde Temuco 🇨🇱
Заклинет - цепь порвётся, и пи-ец рукам. Если Цепь тупая, двига сгорит быстро, ну и редуктор не предназначен для таких нагрузок. Но конечно безопасность на первом месте, не советую такую вещь собирать и покупать у китов. Берегите себя и своих близких
У тебя в лесу и интернета нет ! И телевизора тоже . Да и диваны под кустами не стоят ... Тоже мне аргумент ! Для леса придумали бензопилы и другой бензоинструмент . А там где есть цивилизация проще и удобнее пользоваться электроинструментом !
Me encantó este video y este invento siga inventando que eso sí es bueno para la unanimidad y útil para hacer el trabajo mas suave y la vida eso sí es bueno y no como esos otros que andan construyendo misiles para destruir la unanimidad unanimidad muchas gracias y muchas felicidades
Купил себе электропилу ( хотя у меня есть и бензопила ) и скажу честно - работать ей просто одно удовольствие !! Лёгкая , удобная , безопасная ,неприхотливая !!! Бензопила по сравнению с ней просто мастодонт !!!
Por lo menos lo podía haber hecho con una amoladora grande y el guarda cadenas más ancho y cerrado...como se escape la cadena le va a costar un disgusto.te lo dice un motoserrista experimentado!
Подшипник болгарки забъётся пылью, потому что он не особо защищён в виду того что прикрыт диском. А тут надо будет менять раз в месяц при умеренной работе, потому что опилки все устремляются к нему.
ЕЕЕЕЕ, Браво, браво, страхотни идей, много хубав канал, отличен майстор, супер продукти, пак браво и респект от стара БГ. EEEEEE, Well done, well done, great ideas, very nice channel, excellent master, great products, again well done and respect from old BG.
А вам тоже нравятся подобные видео когда вначале говорят "мало кто знает эту функцию обычной спички" а потом берут эту спичку, приваривают к ней электро-двс, добавляют нейтронный процессор и квантовый ускоритель частиц...
Right... While cool if you desperately need a chainsaw and in a major pinch. 1 it won't last and 2 probly gonna take him out when it details at 10k rpm