Few people know about this silicone trick / Make perfect silicone every time 

What a trick! Your silicone tip for achieving perfect results every time is game-changing. It's amazing how such a simple technique can make such a big difference. Thanks for sharing this little-known secret!

I needed to do this awhile back thanks

Awesome video...thank you for posting!!!

Thanks for sharing your techniques for easy and neat work

Thank you so much! Interesting and helpful hacks..looking forward to more tips❤

Wow... It is a very simple nice trick.

Very good idea! Thanks!

This is the best hack yet, wish I had learned this a while ago - I have to do some caulking so I’m looking up tips now

Merci pour l’astuce

Wow! Thanks for the wisdom!

My father was a mechanical engineer and he did upkeep to our home as RNR. You are the only one in my 50+ yrs that is as smart with your techniques. TY

Brilliant! Thanks

Good Job and Idea. Perfect 👍🏻

Odličan, jednostvan i stručan prikaz. Primjenit ću to sigurno

Very good!

Excellent. Thank you.

Thanks,wonderful tip

working!!! thanks

Thank you

Nice ideea 👍👍

Super like, thanks 👍

Excellent video, very useful!

I like the soapy water spray. Not sure I could run tape straight enough along a 1700mm bath!!

Good tips man, thank you!

Wow that looks good

Wonderful video! Thanks for sharing!

Great video, thanks. Quite comforting as I try to take on my first attempt. Not so sure about the last clip where you placed the adhesive. I get a feeling that it will create tiny opening for the mold build up when you pull out the strip. Let's see.

Love the first bit where he’s cutting the end towards himself! I mean I was always taught to cut away from yourself esp with a blade like that! Cut it short as I bet he had to put a plaster on his thumb 🤣

Fantastic, and when you think about it, it's So simple, BUT you've got to Think about it FIRST 😊😊😊

I've been struggling with smearing my caulk lines for years and you are saying applying a soapy solution will solve this problem. Unreal! I will definitely try this trick. Thanks a million my brother!

Brilliant 🤗

I used to have a house with windows that had wooden frames. Every few years I had to repaint the frames and re-caulk around the glass. The first time that I sealed around the glass the caulking didn't seem to adhere to the glass properly in a few areas. The next time I removed the old caulking and cleaned the surface of the glass with rubbing alcohol. I applied new caulking and it bonded to the glass perfectly. This was a very helpful video. Thank you!

Excellent Dankeschön

Does cutting the nozzle at about 45 make your hand spray straight as you applicants it? I noticed the first two examples were really shaky but the 3rd was a lot less shaky than the others

Çok güzel bilgi Teşekkürler

Super perfectos gracias

Thanks for easy technics

Les joints droits sont les plus simples et les plus intuitifs à faire proprement ! Le jour où un gars mettra un tuto pour faire de beaux joints dans un angle rentrant, là je mettrai un pouce bleu !

And lets say if you have 1/8" crack and you want to fill it to depth 4 " & the crack is not stright any tricks. I have air compressor & that will blow silicone and it seem to hold up. do you have some thing that will work without the air compressor.

So great, thank you channel owner

Super 👌 Excellent informative video JazakAllah Khair

This really really helped❤thank you

To su majstori odavno zaboravili.......

awesome vid. three thumbs up! ;))

Very nice Video, thanks!

Oh.....THANK YOU. This makes so much sense. I've gotten ro the caulking part of my project and felt unprepared. NOT NOW! 😉

Slt...Merci pour cette belle démonstration...Cdt

Brilliant mate.

Более 30 лет работаю с силиконом, есть специальные шпателя для удаления лишнего силикона, а пальцем делал до этого только клеил скотч на плитку чтобы получилось красиво🤗. Случайно в Германии на ярмарке увидел комплект инструментов (4 шт шпателя) што то около 100 марок. Не поверите 1 км за неделю

FANTÁSTICO 👋👋👋, Muy instructivo tu video, pero me extrañó 🤔 que en la miniatura del vídeo ponés una pistola de espray en el tubo de silicona y al final no lo explicas 😢, Bueno pues ya tienes un nuevo suscriptor 😉, Un CORDIAL SALUDO desde Madrid 🍻🙋.

Я приловчился вести пистолет навстречу выхода силикона под углом 45° ко всем сторонам,тогда всё ложится плотно и ровно,и не нужно после пальцем ровнять!(разумеется,за исключением места старта или стыка).

good video...

Great technique weird thumbs.

Merci !

c'est super fait par un pro, j'aimerais savoir pendant combien de temps, il s'est exercé avant d'avoir un résultat parfait

👍👍👍thanks you

excellent

Super 👍🌟

Beautiful work. The soapy water trick is where I've been going mícheart 🤦‍♂

You might get a clean line of bead but as soon as soapy water hits the silicone it fails and will just slowly break down and pull away after a while. Try mastic gunning out a lump of silicone. Put it to one side & then spray it with soapy water and watch what it does to the silicone. It turns to a messy unworkable gunk. Profiling tools seals the join properly and gives a really neat, smooth finish.

Merci monsieur

Благодарю за видео!

Pro lajka dobré video.. potěšilo mě, že si na to neberete stěrku, ale hladíte prstem 👍 voda s jarem je ready, ale na 5m obkladu na lince bych tu pásku nikdy nepoužil, odtrhá jemně silikon a sundavat tu délku fakt ne 😉

It would be nice if he showed us what he was actually doing making repairing and so forth. I'm sorry I didn't get any information at all out of this. It just seemed like a lot of products being used ...but for what purpose ?...?.....?

Bravo.i like it and I encourage you

Óptimo Continue a nos ensinar 🙋❤️

Good things indeed.

Огонь! Я женщина и то смотрю, очень интересно и полезно!

Cool !

Where’d you film this? In the middle of the street lol. Great video though

Good.

Мало кто знает об этом трюке с наждачной бумагой и ножницами! (1:28) Сразу видно мастера!!!

Hello sir. Is it ok to use any dish washing liquid??

Wow ..thank you ,just about to do my kitchen sink ..

Well the trigger from spray bottle can't happen, that's why it isn't shown.

I use pex al pex pipe and soapy water to finish silicone. Better than finger.

Hey im french someone can explain me what’s soap water please ???

I use rubbing alcohol instead of soapy water.

Красиво, быстро.... Даже в углах?

SALUTAM. ESTI MESERIAS MIGALOS, BRAVO!

Merci 👍

Yeah you're the only one in the world who knows how to make a nice piece of silicone I do lines 8 ft across garage doors in about 4 seconds with two pumps and they look nicer than that

Merci

Vielen, vielen Dank ❤🙏 Das Video hat mir sehr geholfen.

Ciekawy poradnik

Мастера это всё давно знают... ☝️ 😄

Where did you plastic caulk gun?

I've applied sealers on daily basis for 39 years you have latex to use the little spit for the spit on the floor and put your finger in it and drag it across your bead if you have silicone use charcoal lighter fluid on your finger and then drag it across this prevents silicone.for or latex from sticking to your finger and allows you to get a nice smooth even bead

Ja znam to odavno!

Спасибо! Но, где Вы раньше были...??? Только что маялась с силиконом и лентой в ванной........

Soap will cause silicone detach! It penetrates underneath on the edges before smoothening with your finger. Just use special tool to take off the excess of silicone and NO water or soap is necessary.

Push the caulk ahead of the tube. The caulk will be forced into the opening and the edges will be cut at the surface.

I watched the video and I am still waiting for the bit that shows the application of perfect silicone.

I agree with euhar84 spraying soap over the silicon isn't the best idea, even though quite a few people use this method because of the risk of later detachment. Cutting the nozzle at a accurate 45 degree isn't that important either due to the fact most people will not be able to keep the gun/ nozzle at the same degree to the work edge whilst moving along, same with the sanding or trimming the sides of the nozzle. Thin quality masking tape the area is best, then don't over apply the Silicon- remember slow and steady with the movement of the gun with a medium pressure on the trigger is best. Try and purchase a silicone gun that stops the pressure when you let go of the trigger, that way if you stop and start the movement part way the the application it will not be as bad. Then wipe over the silicone with either a wet finger or a rubber silicone profiling tool, then remove top tape and wipe gently over the silicone again to remove any step the the tape might have made, then do the same with the lower tape. There isn't really a set way to applying silicone apart from making the area is really clean ( especially from old silicone) and dry, it will always be dependent to the surfaces i.e tiles, behind bath taps etc. On a straight run with no obticals with two smooth surfaces like in the video, I would do it free hand and not even need to wipe over.

Bel video, anche io ho appena aperto un canale RU-vid, bello trasferire le proprie esperienze lavorative agli altri.

인건비를 생각하지 않는 시공법 시공 부위가 모두 직각 일까요?

Молодец какой

👏👏👏👍здорово!

You can learn a lot by watching this video

Серик,Берик и Кайрат😮😮😮