Ff 15 Industrial getting modified

Подписаться 354

Просмотров 3 тыс.

50% 1

Adding engine cooling fan blowing out.
Pressure was increased from 1900 psi to 2800 on the auxiliary.
Orbital motor gets locktite on the screws.
Drilling holes for atv club. No footage.
Quick couplers and adapters, 14 din to 3/8 pipe thread.
@ mini Chinese excavator

Опубликовано:

2 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 10

@jtsokiehobbyandadventures6666 3 месяца назад

I have the diggit myself. Im going to add a fan to mine. I could only do 2100psi on hydraulic pressure. On the auger i all ways put on the other direction my self.

@mudslinger1m Месяц назад

Did raising the pressure increase lifting capacity? What's the most you've ever lifted with this machine?

@Rollie-Lund Месяц назад

It helped but not sure of exactly how much it can lift, keeping the lifting and swinging close by the machine helps a lot. It helped the auxiliary with the auger attachment on a lot, but a little too quick with the tilt bucket.

@denslod2930 Месяц назад

Are the quick connects 3/8 and did you use both female on the machine or one male one female?

@Rollie-Lund Месяц назад

Yup,3/8 pipe thread. Male and female on the machine and male and female on the attachments.

@denslod2930 Месяц назад

@@Rollie-Lund Thanks, but I meant, 3/8 flat face, not the other end that's threaded. They come in 1/4" and up

@tigertoilet2 3 месяца назад

I bought a ff-15 also . Picking up soon. Yours have hydro filter.

@Rollie-Lund 3 месяца назад

Dose not have an external filter yet.

@gtgeorge1814 2 месяца назад

My hydraulic lock out doesn't work either, they are on all the time. The switch tested fine, I'll try crimping the connectors like you did. I'll have to dig deeper if that doesn't work, any thought?

@Rollie-Lund 2 месяца назад

Wouldn’t know what to do if it’s stuck on, other than disconnecting it from the battery, the dye electric grease is important too