FFXIV: Endwalker Machinist 1 to 90 Leveling Skills Guide

Подписаться 68 тыс.

Просмотров 138 тыс.

50% 1

Patch 6.4: Tactician increased to 30 yalms
Patch 6.3: Potency buffs and QoL for Wildfire and Hypercharge.
Re-added Dismantle. Literally toss a wrench into a monster's face. Great mitigation tool for bosses. PLEASE use it.
Patch 6.28: Several potency buffs
Patch 6.2: Turret and Queen are now fixed length buffs. The potency is what increases, from minimum to maximum. Essentially works the same.
New? Got too many skills? Made the mistake of using a level skip and have no idea what anything does? Just hate reading? Try this guide out!
This guide seeks to teach new Machinists how to Machinist properly, without getting too deep into optimization. I'll be showing off and explaining some openers but not delving too much deeper beyond that and general skill usage. Endgame is a long way away and there's lots to learn along the way. Start slow and work your way up one skill at a time! Then, graduate to more advanced guides.
General DPSing Guide: • FFXIV: ABC - A Beginne...
Ranged Role Actions Guide: • FFXIV: Shadowbringers ...
Guide to my HUD: • Explaining My HUD and ...
Dictionary of Terms (if you need): • Final Fantasy XIV Dict...
Rotation images: imgur.com/a/6TkveO1
Twitch: / weskalber
Twitter: / weskalber
Discord: / discord
Patreon: / weskalber
Timestamps:
Intro: 0:00
Playstyle Summary 1:47
Requirements: 2:34
Role Actions: 2:54
L20. Increased Action Damage: 3:17
L1, 2, 26. Split Shot, Slug Shot, and Clean Shot: 3:38
L4. Hot Shot: 4:25
L10. Reassemble: 5:12
L15. Gauss Round: 6:03
L30. Hypercharge: 6:43
L18. Spread Shot: 7:42
L30. Opener: 9:10
L35. Heat Blast: 10:26
L40. Increased Action Damage II: 12:26
L40. Rook Autoturret and Rook Overdrive: 12:43
L45. Wildfire: 15:41
L50. Ricochet: 17:25
L50. Opener: 18:45
L52. Auto Crossbow: 21:28
L54. Split Shot Mastery and Heated Split Shot: 22:10
L56. Tactician: 22:24
L58. Drill: 24:22
L60. Slug Shot Mastery and Heated Slug Shot: 25:31
L60. Opener: 25:48
L64. Clean Shot Mastery and Heated Clean Shot: 27:34
L66. Barrel Stabilizer: 27:50
L70. Flamethrower: 28:59
L70. Opener: 30:39
L72. Bioblaster: 33:43
L74. Charged Action Mastery: 35:21
L76. Hot Shot Mastery and Air Anchor: 36:29
L78. Enhanced Wildfire: 37:05
L80. Promotion, Automaton Queen, and Queen Overdrive: 37:23
L80. Opener: 38:44
L82. Spread Shot Mastery and Scattergun: 40:48
L84. Enhanced Reassemble: 41:29
L84. Marksman's Mastery: 41:59
L86. Queen's Gambit and Crowned Collider: 42:24
L88. Enhanced Tactician: 43:04
L90. Chain Saw: 43:25
L90. Opener: 44:47
Outro: 48:07
FINAL FANTASY is a registered trademark of Square Enix Holdings Co., Ltd.
© SQUARE ENIX CO., LTD. All Rights Reserved.
#FFXIV #Endwalker #Machinist

Игры

Опубликовано:

5 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 179

@WeskAlber Год назад

PLEASE USE DISMANTLE RE-ADDED IN 6.3! It's SO good. Don't you wanna throw a god damned wrench into god beast's face?

@Brown95P Год назад

How do you feel about Machinist's Dismantle compared to Bard's Nature's Minne, specifically when it comes to staying alive as each class?

@ChieMiyagawa Год назад

I was just about to ask about dismantle lol

@davidmaclean2734 7 месяцев назад

same here, was confused when dismantle came in at lvl62, I was gunna ask about it, then the pinned comment caught me@@ChieMiyagawa

@LightbladeRiulo 2 года назад

I SHALL DEFEAT YOU WITH THE POWER OF FRIENDSHIP AND THIS GUN I FOUND!

@tiredtraveler4536 2 года назад

And this flamethrower! And this giant robot! And this drone! And this chainsaw! And this crossbow! And this drill! And this bioblaster!

@charnor2727 Год назад

@@tiredtraveler4536 most of these are just one thing turned 5 different ways

@Schrix3 10 месяцев назад

Maybe the real treasure was this **gun** I found along the way.

@seriodenoyarohi7403 2 года назад

Things Wesk called Machinist in this Video: "My Sharona" - 2:35 "Mushymist" - 5:04 "Mac & Cheese" - 8:52 (thanks to NewAmsterDan) "Morbius" - 9:11 (thanks to choiii) "Metronome" - 10:17 "Minikit" - 18:00 (thanks to Andrea Digney) "Machina Ja" - 18:52 "Marshmallow" - 21:15 "Macadamia" - 21:24 "Mark Zuckerberg" - 27:15 "Microwave" - 32:41 "Macintosh" - 37:31 "Monty Python" - 42:27 "Macklemore" & "Macarena" - 47:12 (thanks to Epic Eric) "Machinama" - 47:53 Any others that I missed?

@WeskAlber 2 года назад

ughhhhhhhhhhhhhh the subtitles stopping isn't me. I'll check again tomorrow incase it fixes itself but this is RU-vid just... not working????? On the actual like upload part, it shows that subtitles are through the whole video but then it like, erases half of them. God this site...

@seriodenoyarohi7403 2 года назад

@@WeskAlber I figured that either the subtitles were being worked on while I watched the video or that YT was throwing a hissy fit again. Had a blast either way, very good running gag for this video!

@epiceric9 2 года назад

47:12 was "Macklemore" and "Macarena"

@choiiiful 2 года назад

I swear I heard mac and cheese but I can't find it, but there's a "morbius" at 9:12

@UVERproject 2 года назад

8:54 Mac and cheese. I did a spit take.

@JJBeauregard1 2 года назад

So many guides only talk about end game gameplay and rotations. The fact you include the complete experience from literally level 1 and even add rotations for certain milestones is just so incredibly helpful for newer players like myself. It makes learning the jobs so much easier, too, just awesome. Thank you so much!

@apathy2454 Год назад

His guides are by far my favorite and my only go to

@rustyjones7908 2 месяца назад

@@apathy2454I use the balance for endgame stuff but going 1-90 these guides are top tier

@Keira_Blackstone 2 года назад

I am thoroughly enjoying you pronouncing Machinist different every time to troll all the people who gave you crap for your pronunciation on the older version.

@kaidaw6546 2 года назад

Me: a MCH main recently stepping into endgame raiding Also me: This video is either gonna be validating or it's gonna show me everything I'm doing wrong lol

@wickenbreux7575 2 года назад

I have used your rotation guides for Dark Knight, Bard and Dancer so far. This morning I thought 'I'm going to level machinist' and here we are. Great timing, great videos and really appreciate the effort that goes I to them. Keep up the great content 👏

@SinHurr 2 года назад

Also, yes absolutely about the comfy key locations. Getting Macalania Woods to 50 was the catalyst in me redoing all my job bars once I broke down and gave up giving myself _worse_ carpal tunnel.

@WeskAlber 2 года назад

That's what I want people to avoid. The ping issues can be rough but they aren't at all important in the grand scheme. Are you taking care of your hands though? THAT is important.

@PlasticArcadia 2 года назад

@@WeskAlber to be honest gnb does this more to me than mch, but I somewhat like the button mashing intensity of both.

@SinHurr 2 года назад

@@WeskAlber I am! I bought a vertical mouse for exactly this reason. Little weird at first but much, much better arm and hand alignment. Very comfy for long sessions.

@m.skellington3795 2 года назад

Your videos have helped me so much when I was getting through Endwalker as DRK and now that I’m expanding to other jobs they help tremendously with understanding them, I always return whenever I take breaks from 14 and need a refresher on what I was playing or if I take on a new role, thank you!!

@curlitros1617 2 года назад

oh cool, just yesterday i came here to check if you had uploaded a machinist guide! I'm glad i didn't have to wait much

@yazan80 2 года назад

I love you’re guides so much. Its so well done and very informative. Thank you so very much.

@Flaebehop Год назад

Very helpful tutorial, I wasn't aware of some of the skill interactions. Mechanicon has always been my favourite job because of the flips. Now I can do more damage while still admiring the acrobatics.

@NalaBlep 3 месяца назад

I find all of these guides very helpful. Thank you for making them and keeping things updated.

@jasonhopkins4689 5 месяцев назад

Just started watching your videos about 1-90 for each job and I'm already a fan man. In this vid when you mentioned "Curving the Bullet", that was the exact same thought I had when I first got MCH to that level and saw the animation for Heated Slug Shot. All the scenes from "Wanted" popped in my head!!! Used your guides to Learn a few jobs already and make openers for them.. also keep going back to them throughout the leveling process for pointers.. Keep up the awesome work!

@cerealio 2 года назад

i just want to say i’ve been watching so many of your videos and they’re amazing. thank you so much for these! they’re very entertaining

@llginsane27 Год назад

I'm new and just got to Heavensward. I picked up Mortimor job and really like it. I was kind of doing it right but your guide was really helpful and will definitely help me improve. Thanks!

@andreadigney6247 2 года назад

I've been waiting for this one! Thanks so much.

@jacobybarra907 2 года назад

Bro literally every class that I want to max out next, you post a video guide and I think to myself "How convenient!" :D

@PunnyFuzz Год назад

Thanks for explaining Flamethrower! I was wondering why id ever use it while looking at its tooltip.

@paytwoyaj8332 2 года назад

Awesome video!! I literally cannot play new jobs without watching your videos. These should be the official job videos

@quantumdream22 2 года назад

Fantastic guide! This helps so much and thank you for your outstanding effort.

@keenenengelPascua Год назад

nt😢Tap on a clip to paste it in the text box.

@Elexii 2 года назад

Bro! Thanks so much for getting this done. I will enjoy the JOB video.

@glacier_official 2 года назад

Been leveling Machinist the last week or so and was wondering when you’d be putting this up so I knew what I was doing lmao

@beatmarroquin4837 2 года назад

It was fun hearing all the names you called the Machine-ist. It didn’t bother me in the slightest just gave me a great chuckle!

@beatmarroquin4837 2 года назад

I felt like I may have been doing my opener wrongishly by not using hypercharge heat blast…my opener is Reassemble, wildfire, chainsaw, gauss&ricochet, reassemble, air anchor, gauss&ricochet, drill, gauss&ricochet, then the 1,2,3 combo. Is there any merit to this or does it need to be improved? I’m open to any and all suggestions.

@msaag5490 2 года назад

Nice timing, I've been using the legacy guide as a rough guide to how to play Machinist.

@luisolivo4178 2 года назад

I came across his channel when I first started been watching ever since overall awesome work.

@ArchangeVie 2 года назад

Lmao you literally updated gnb while I was leveling it and now I’m leveling mch and same thing happened 😂 but seriously your guides are incredible. literally watching all of them since I started to main drk in April of last year and all the other alt jobs after beating ew in January now, only 9 left to level up and when I’ll say I can play them all, it’ll be thx to you ☺️

@Hoixey Месяц назад

Came back to this video witb Dawntrail to make sure i hadnt fully forgotten how to macedonia, and delighted in all the words you used to cover that MCH isnt the most obviously pronounced job out there.

@TemporarilyWoW 2 года назад

I dont get how you keep releasing videos on jobs just as i begin leveling them, keep up the great work🙏

@Maaaaax_ 3 месяца назад

Calling Machinist by differente names throughout the video is a genius and funny bit, this is now my favorite guide you made just for that detail

@callmeobsequious 2 года назад

Machinist my beloved! ✨️ I'm hype for this guide.

@callmeobsequious 2 года назад

(I also love your very correct pronunciations of Machinist, lol.)

@xnikolasbs2230 2 года назад

My man is on fire with these guides.

@WeskAlber 2 года назад

Thanks for the support and the appreciation of the video! PLEASE comment if Subtitles stop halfway through the video again. I THINK I found a workaround but YT has a bug that keeps deleting half the subtitles. This video launched with full Subtitles and yet only half of them actually appeared for viewers. This is on YT's side since on the pre-publishing window, it showed the ENTIRE video having them before just, removing the latter half when published. No idea what, why, how... point is I finally figured out a way to give people subtitles consistently but YT refuses to work. So PLEASE tell me if it breaks again.

@callmeobsequious 2 года назад

I had no idea your videos had subtitles! That's so awesome, I love how accessible you make your content.

@DronesOverTheMoon 2 года назад

Thanks for the video Whesk. Im struggling to find an archetype i feel comfortable in, Got Summoner, Dragoon, Black mage, Red Mage and Reaper to level 90 and now ill do Machinist.

@Krishnaroks 2 года назад

Thanks for the guide on moshimoshi. I believe this wraps up all the jobs. Anything you're planning on working on next? Or are you keeping it a surprise

@WeskAlber 2 года назад

Stay tuned til next week for something different! An announcement.

@Planeswalker817 2 года назад

@@WeskAlber I am excited!

@haydena1169 2 года назад

Banger guide as per usual

@ncieminski82 2 года назад

Yay the one I have been waiting for

@Porako 2 года назад

I love your long form intro 💯🔥

@casualgamerfiend4728 Год назад

I'm a new player returning after free trial I'm amazed at how much fresh content is for this game from the community my head is spinning

@havok9525 2 года назад

I got a rest from ffxiv for now as a free trial but man, your guides are really good and interesting nevertheless. Thanks!

@BrightNeonBrilliancy 2 года назад

The first couple of times I thought I was mishearing you....but I see what you did there XD

@Wanderingsage7 2 года назад

I kinda wish you could summon a turret along with the queen, but that's a me thing. Wish for a lvl 100 ability: gestalt mech

@davidmaclean2734 7 месяцев назад

these guides are like my own personal gospel, so easy to follow, and an excellent base for picking up new jobs and understanding them. Though I do appreciate your openers, I tend to use them to form the basis of my own. looking forward to Dawntrail and the new Viper class, and cant wait to see your guide on it, Pictomancer looks a bit to colorful for me so I'm gunna give it a hard pass I think... Ohh, and you mispronouncing the job name, I found it hilarious, not irritating, nice touch, keep being you my friend 😛

@PeacefulPorcupine Год назад

Why, out of curiosity, is chain saw in the hypercharge phase rather than the Air Anchor phase? Also, do you have any suggestions on trash pack openers?

@InFluxCapacitor Год назад

Sw in the desc about the 6.25 change. Autoturret having a fixed length on paper is just a QoL, same potency per second and all that. But it fits better under buffs so it's a buff overall. Just gotta summon it slightly earlier than buff windows.

@lp1spiritguidance577 Год назад

I haven’t used machinist much, I’m either playing reaper or warrior but my lordy machinist is still so fun I need to get practice in regards to the bursting with wildfire active so I’ve tried to layout hotbar as easy for me as possible

@dragonhearthx8369 Год назад

Do you know how to do the math for 6.2 and the turret/queen damage? I think it is a nerf. But I'm not sure.

@CanisMythson Год назад

Update 6.2 has some MAJOR changes to the Rook Autoturret and Queen, so much so that the information in the video is outright the opposite of what it does now. They both increase in attack potency instead of duration with full Battery Guage, and have a set duration.

@WeskAlber Год назад

ty for the reminder I need to do 6.2 patch note descriptions still. Will need to do that tomorrow morning

@lucalopez9604 Год назад

@@WeskAlber you might want another reminder

@StellariumSound 2 года назад

You've really come into your own, man.

@Bleed0379 2 года назад

amazing guides

@koopakape Год назад

14:40 I can't believe that I'm looking thru the comments and don't see anyone actually mention this Deltarune Spamton reference slipped in. Also, watching this just a couple months after it was uploaded and the turret, at least, has been changed pretty substantially in that short time frame!

@Mrlaged 2 года назад

Im a Mch main, and i was kind of wanting to see this vid lol

@coffeeguygamer5942 7 месяцев назад

I'm simple, I see closed captions actually being done by a human, auto thumbs up + subscribe!

@WeskAlber 7 месяцев назад

It helps its just my script being copy pasted

@TomTheOwl68 Год назад

Thank you

@Jiriki79 7 месяцев назад

love the sonic colors reference!

@kubasliwa204 2 года назад

So just curious, but why are we opening with Reassemble + Air Anchor instead of delaying them 1-2 GCDs to fit them inside party buffs? This way of doing it seems to be the case for basically all other jobs' openers, where we don't dump all of our hard hitters immediately to start the cooldown earlier, so why is it not so for Misandrist?

@WeskAlber 2 года назад

Because you can't, because you would need to delay 3-4 GCDs, which also means Reassemble isn't on cooldown. We also already have the party buff window extremely full, we wouldn't even fit it in.

@azinanaire3229 Год назад

Hello. Love the guide but I didn't understand what is the aoe rotation, especially the lv 70 one. Can you tell me pls?

@WeskAlber Год назад

Due to there not being really a rotation to it. Its a priority thing of just "throw the highest damage stuff available out" Basically, anything AoE with a cooldown timer is better than your basic AoE attack. Including Auto-Crossbow

@popcornyumm 2 года назад

Man these have been so good for Free Trial with the lvl 60 cap

@dragonhearthx8369 2 года назад

My thoughts on some changes: Flamethrower: (gets a name change) now for 15 seconds, the next 5 weapon skills give an additional 10 heat. Barrel stabilizer: gives 25 heat and 25 battery. (Can be used out of combat) A new trait: When you activate your turret/queen you give a party wide shield that varies based off of the battery charge used. Wildfire: changes to a napalm that simply adds vulnerability to the target for 15 seconds. (2 minute cooldown) (similar to the new mug ability)

@dragonhearthx8369 2 года назад

Side note: the only reason why barrel stabilizer was changed was for the simple fact of balancing potentially to much heat generation if Flamethrower was changed.

@TheRapidVengeance Год назад

Do the turret's attacks add to wildfire/detenator ? also when it detonates is it aoe or single target damage ?

@WeskAlber Год назад

No, single

@TheCrazyhairdude67 3 месяца назад

Looking forward to beating ARR so I can play Mazal Tov

@Khriss. 2 года назад

i love your videos

@wb3159 2 месяца назад

good bit.

@MrMannerless Год назад

Hey Wesk, it's me again. Currently i'm only 60 with this class and have everything up to it so far, but for the life of me i can't figure a way to squeeze 5 shots of heat blast in while trying to weave gauss round and ricochet. The best i get is 4. what am i doing wrong and how do i fix this?

@WeskAlber Год назад

Ping will play a big factor. Later on once you get 3 charges, it becomes less required to weave to prevent over-cap and may benefit you

@Glizzygoblin- Год назад

Will you do me a favor and put baby bear from sesame street in the bottom corner like he is explaining it

@YenLe-di5qt 2 года назад

I'm here to find the paissa minion in every video thumbnail

@pumpkingamebox Год назад

I just found out that my ping miraculously disallows me to use heat blast 5 times while also using gauss and ricochet. So much for me playing machinist. 😅

@EdBurke37 2 года назад

I couldn't help but chuckle at each silly name🤣

@AnomonomonA 2 года назад

My favorite job, Mozzarella

@Reynsoon 4 месяца назад

I'm SO SORRY it took me this long to see the follow up to the joke, and the Sonic Colors 'Remustard' joke means this video is starting off *perfect*

@Vistouf 2 года назад

I was so confused as to why this guide sounded so familiar to the gunbreaker guide, and then I realized that it wasn't the gunbreaker guide, but the 30-80 guide that I had started to watch 💀

@LiZzZzZArDDDD Год назад

Im new in this Game and i have one question to your engame rotation. why u dont put heated split shot not between the first gauss round & ricochet? is it not better?

@WeskAlber Год назад

I don't think you understand the difference between GCDs and oGCDs. oGCDs do not activate the GCD - that being Global Cooldown. Split Shot is a GCD. Gauss Round and Ricochet are not. Further, Drill IS a GCD. So putting Split Shot there, you'd delay Drill to your 3rd GCD instead of second.

@LiZzZzZArDDDD Год назад

@@WeskAlber i understand it, but thinking about animations between 2 ogcds. Then i thought its better to play gcd -> ogcd -> gcd. U understand what i mean?

@WeskAlber Год назад

@@LiZzZzZArDDDD No, because GCD is 2.5 seconds. During the GCD you can use two oGCD skills. You can see in the video too. During those attacks, the GCD is still running. And then I use Drill.

@LiZzZzZArDDDD Год назад

@@WeskAlber allright. Thanks for ur answer :)

@MrCowalsky24 6 месяцев назад

Why not weave in another gauss and ricochet in the heated split shot? Thanks for the guides by the way this is a situation where the student defies the master as I have learned mch from watching your guides 😂 Just asking because it has been implanted into my machinist brain to weave skills whenever possible I just love pressing buttons

@WeskAlber 6 месяцев назад

1.5 seconds is not enough time to double weave

@Prim4Veras 23 часа назад

I’ve been playing Machinist since I unlocked it in Heavensward and now in Dawn Trail as I’m trying to get it past Lvl 90-I’m only learning the proper combo now… Oops

@moonum4567 9 месяцев назад

Went from MNK to MCH, lookin back a bit but MCH is too much damn fun. MNK is really dry in the 50s so thats probably why I switched, but MCH is wild.

@cicisstormshelter1076 2 года назад

Love the Sonic Colors reference at the beginning. "DRILL!" *Sonic crashes the game* XD Seriously, did you just crash the game by using the Drill? :p

@clericneokun Год назад

Any thoughts on the 6.2 changes?

@WeskAlber Год назад

There were changes. That's all I got.

@Zaqster 2 года назад

When playing MCH, I pretty much use flamethrower on cooldown when doing packs, it's such a nice small break to stretch/relax my hands from otherwise such a busy job.

@Redbushandhoney 2 года назад

10 out of 10 intro.

@aldenencluna6409 2 года назад

Nice.

@markcollier2347 2 года назад

Hahaha I literally just started leveling my Machinist again yesterday.

@sacredlunatic 10 месяцев назад

I just wish there was an AoE use for battery, or simply that the Queen attacks would do some large percentage less to nearby enemies.

@BryceThacker-h3g Месяц назад

Plz do a Dawntrail update!.. I love ur job videos!

@Wanderingsage7 Год назад

I like flamethrower. It's got a neat animation and it's like the only skill a Machinist can use in town. That said, it doesn't seem to be that worth it in combat. In my limited experience anyway. It does damage, but you get about the same amount of damage with spread shot, and you can reassemble Spreadshot for more damage. I'm probably missing something.

@WeskAlber Год назад

Well there's an entire section on it!

@marktarshis3659 9 месяцев назад

My new mantra- "What would Wesk do..?"

@Scerttle 2 года назад

Heatblast bites. I can't even single weave with my ping. Other than that MCH is super fun.

@restlessundead9366 11 месяцев назад

Why is that still voice like from I know it but I can’t recall the name and it has been driving me crazy

@WeskAlber 11 месяцев назад

Do you mean the "Drill!"? Sonic Colors

@restlessundead9366 11 месяцев назад

@@WeskAlber OMG! it was on the tip of my tongue thanks haha for answering my goofy question

@BryceThacker-h3g Месяц назад

Plz do a Dawntrail update!.. I love ur job videos

@ttabood7462 2 года назад

What is the thing on the robot queen's arm supposed to be? It looks like it may be a laser or rocket launcher but it doesn't seem to have a purpose. Seems like a missed opportunity there.

@TheNorthernWall 2 года назад

Queen uses it during her 2 finishing moves.

@ttabood7462 2 года назад

@@TheNorthernWall oh ok. I must have missed that. thx

@DevilSeiji Год назад

Shotgun \o/

@JMChatman 2 года назад

Is the terminology in this guide a MCH thing? I kept having brain breaks when you would use a different term for MCH. LOL

@juliasophical 2 года назад

It's a running joke alluding to how often people in the FFXIV community mispronounce "machinist" (for reference, he says it correctly @48:11). The most common mispronunciation you hear all the time is "mechanist" -- it doesn't help that "mechanist" is not only an actual word, but the name of a Guild Wars 2 profession among other things, so a lot of people just misread "machinist" as "mechanist".

@JMChatman 2 года назад

@@juliasophical ohhh! Thank you. I’m not sure which one I say. I call it a machine - ist. Is that right? Like as in “Donatello does machines” - ist. Lol

@theblackishboy1105 11 дней назад

The shotgun is cool but i wish it replaced crossbow and we kept the original aoe skill idky but it just feels nice to me 😭

@lovelydumpling 9 месяцев назад

I need a plugin that says DRILL! every time I use it

@pomarril2718 10 месяцев назад

MACHINIST MAINS RISE UP *falling metal pipe sound*

@CoolcatCammy 7 месяцев назад

I have never questioned Albert Wesker till this video. WHY would I use Riccochet in single target? It does not make any since

@WeskAlber 7 месяцев назад

What doesn't make sense? It does damage, it's free, and free damage is good. If you don't, it just sits there. And when you look at Heat Blast, Heat Blast refreshes Ricochet. Heat Blast only gets used in ST, so obviously Richochet is expected by the Job design even.

@CoolcatCammy 7 месяцев назад

Okay so like, when Overcharge is active at most I can get 5 blast. You can't get 5 blast off if you use both riccochet and Guass......can you?@@WeskAlber

@WeskAlber 7 месяцев назад

@@CoolcatCammy You can, check the openers. Heat Blast refreshes the cooldowns of your oGCDs, and does so so much that you need to use Ricochet/Gauss between Blasts.

@CoolcatCammy 7 месяцев назад

I don't know if I can be that fast on controller if I just spam heat blast will I suck? 😢@@WeskAlber

@WeskAlber 7 месяцев назад

@@CoolcatCammy It takes practice, plenty of people do MCH on controller. Just put Heat Blast, Ricochet, and Gauss Round in the same area of the controller. Say, R2 + X, Square, and Circle.

@kfchero2 11 месяцев назад

i thought i was going insane when I heard "My Sharona" and "Mushymist" instead of Machinist

@Sylvr369 2 года назад

"It's a goddamn shotgun!"

@qixaqyx 2 года назад

It bothered me until the third name change, then it was just comedy gold.

@SinHurr 2 года назад

Going to find someone to do fan art of Ana Nidhogg

@shiraori5450 Год назад

Hey guys, we're going to be adding 3 new classes in Heavensward, our medieval dlc, so how about dragon Knight for tank, dark knight for DPS, and Cleric for healer, just to make it simple. Bob in the back: But I wanna gun.

@WeskAlber Год назад

but they added 0 classes