I just wanted to give you a big thank you. Iv had this same little machine in my loft for years. Tried it once had no clue what I was doing. I'm 58 years young and u think by now I would no how to use a sewing machine. Ask me to hang wall paper I'm on it lol. So I keep seeing these on amazon and ebay and got mine out of the loft. It looks brand new box a bit dusty lol. I remember I just had no clue how to do the bobin, was at it all night when I first got it. Put it back in the box. Only to see the light of day 15 years later. I spent about 10 15 pound on it then. Its identical to yours. So u have shown me at last how do do the bobin. I'm so proud of myself😂🤣😂 I haven't done any sewing and want to learn more about the needles and stuff and that plastic bit I don't have that. I have a needle and I no its not been used but I would prefer to no how to do these things before I get started on the sewing. Then if I mess up I no what's hat on the machine. I don't have the booklet it came with and the electricity part it says on the box order separately. So just batteries for now. If I can master the mechanical side of a sewing machine then I will feel safer starting something if I mess up. I'm quite proud of myself .you have showed me how to wind the bobin how to set that all up bring the cotton through and change a needle if necessary. You are a great teacher. Kids will catch on quick to your teaching was . I should if payed more attention in sewing class, I regret it now. Poor lady she was really clever looking back now. Still your never to old to learn a new skill and the day I can design and make my own cloths I will be my own master. Its something I have always wanted to do. Once I master the technical side do a few things on this little sewing machine I'm moving on up to a bit better. Any ideas what sort I should move up to. Iv been checking out the brother LM-2421 it's not the best but its a step in the right direction. Secondhand. That's all I can afford. Many thanks for all your help . You sound such a lovely calm teacher. ☺ I shall keep watching you. You have made me at 58 feel proud of myself. It means so much to me. ❤
OHHH MYYYYY GOSSSSSHHH.... thank you so much for your video's on how to use this Portable Mini Sewing Machine FHSM 505 - NEX Sewing Machine... you are awesome... I would have been dooooomed from day 1 without your help & advice on the video's... I'm new to a sewing machine... only tried one once at school & then once again about 5 years ago & couldn't get on with it.. but I am loving my new lil baby lol I am definitely hooked now (no pun intended lol) thank you again.... take care & stay safe xXx
Guys, if the thread gets a massive build up on the underside of the material, it could just be that the tension level is not compatible with the stitching mode. I fixed it just by switching the tension mode's level 😀
Can you elaborate on the tension mode? Where is this, what's the best setting or purpose of each mode? I'm a total beginner and I really appreciate if you can share some knowledge
I just decided to purchase this machine from Amazon. It arrived today. I haven't used a sewing machine in over 40 years. Thank you for the detailed information. Looking for more of your videos.
Just found your channel. I got rid of a really good Janome sewing machine last year that i seldom used (long story) and just need a basic one for little projects, well i was going to get those handheld ones but reviews said they barely work. I wanted the elna mini which was on sale, bought some fabrics and supplies and literally forgot to buy the sewing machine not realizing days later. The elna is now full price and i didnt know if these minis would work or were more of a toy. You have saved me money and given me confidence to go ahead. New subscriber here and already love your thoughtful channel. You would make an amazing sewing teacher like the ones i had in school
*I just bought a mini machine for $17.00 to learn on. It doesn't have different stitch choices like this one does. 💖💖💖 Great video. Thank you. 😁😁😁* Sharon in SC
@@EasySewing4Beginners *Mine is just one stitch nothing extra. It doesn't even go backwards. I have the unboxing on my channel if you want to check it out. Happy Creating. 😁😁😁* Sharon in SC
I dunno. So far my learning curve is a straight line. There is the nuance to the machine. What I have learned is all sewing machines have a "touch" they are OCD. Right needle. Right thread. Right fabric. Right stich length. Right tension. Lawd!
thank you so much for the video, however, i silly-ly dropped the needle holder screws when loosing the needle, and now the needle is stuck when i try to run it. you would not have macro picture of how the screws should be installed? i noticed there is this small screw inside the holder... thanks again in advance!
Not really making a buttonhole was really cool but to show the machine true capability you need to make a repair on something shirt pair of pants or even make a bean bag
Would like to know about some of the feet with my machine that don't have any kind of indication as to what they are for. Thank you for showing the trick with the buttonhole. I have other machines that I will probably u se for that function. I'm not all that crazy about the look of this one when finished. I was thinking of doing it again on the sides to make them look more solid. What do you think?.
How am I supposed to loseen the needle bar screw, mine is really hard to move or lose it, i cant lose it with habds is there another way to loseen it up? so I can take out the needle and replace it with a new one
Hi, if you’ve found the answers, would you share the link? It seems like I have to buy $13 5mm tri head screwdriver to open the machine. Can I lubricate it without opening the left cover of the machine? Thanks!
I have the FHSM-505. For some reason the thread gets a massive build up on the underside of the material. It takes some doing to get it loose from the machine. It probably would not be so bad if I turned off the machine quicker. I have tried two different spools three different needles and a variety of tension settings . What else might I try???
Do you still have that same machine? Was the problem solved? and do you recommend it. I'm planning to buy my first machine and I don't know if this is a good option. I saw many comments about the needle being broken after few stitches.
I just bought my daughter one of these and the screw that is on the post where you thread the needle, how do you get that screw through the metal clamp and what is the nut on the screw for? I'm worried they didn't thread the whole properly
I unscrewed mine stupidly as it was all threaded up and now I can't get the bobbin case back in the right way so I can't get the plate back down 🥲 I think I've completely messed the machine up
I have watched this video a couple of time, very informative. I do have one question about the bobbin. You video shows you putting it in with the thread to the left. The instructions show putting it in with the thread on the right. Which way is the proper way to install the bobbin. AJ
Any thoughts on why the sewing machine has power but will not run? Watched all videos and loaded everything correctly. The foot pedal is not powering the machine it seems. 😢
Hi, I just started sewing with this machine, beginner here. I am not able to stitch my satin fabric. Other fabrics it does fine but with satin the thread doesn’t come out of needle, it just doesn’t stitch!
Does anyone else have frequent problems with the needle bar position/timing? I have had to adjust the needle bar more times than I can count now. It happens so frequently that I haven't bothered to put the screw back into the face because I need constant access to the needle bar adjustment screw. This isn't even my main machine so I have only used it about 10 times in the last year. I have had to adjust the needle bar almost every time I have pulled it out.
It works fine I made 4 place mats for my table , came out great started to make covers for throw pillows I misses 1 pin and the needle bent went to replace and disaster happen ..the needle holder fell off .can't put it back together ...help
Hola!!! Soy Ale de Argentina! Quería preguntarte sobre el mantenimiento de la maquina, como hacerlo para que funcione bien!!! Muy bienos tutoriales, quisiera saber más!!!😊
I have the same machine and I don't know why he tore my thread. Immediately at the beginning of graying the tear changes the thread and I also can't sow anything. It's like someone's cutting it off in a needle. Help thanks from ❤️
Try checking the tension dial. Make sure it is on number 4. Also, have the stitch selection on number 1. When you are ready to sew, use the hand wheel to do 2 manual stitches first. This will stop the thread from coming out of the needle when you start sewing. Mine does this sometimes. Give these things a try and then let me know how it goes.
@@vuyolwethutyuka5764 what type of thread u use this machine work good with polyfile thread when i use mix or cotton thread is break of before i finish my sewing. no cheap dollarstore threads too as they break off fast.
try only using polyfile thread other mix or cotton break after sewing finish i have that problem when use those threads ... no cheap or dollarstore threads too fyi
I just wanted to say absolutely awesome video and very informative i've had this sewing machine for about 4 weeks and i am loving it, i just wanted to ask though, is there a way to put the feed dogs down because i have the multifunction 52piece presser foot set and they all fit on my machine but there are a couple that you have to lower the feed dogs to use certain presser feet, if you could help me with this question i would be extremely grateful
Hi thanks so much for the tutorial 😊 The problem is my thread is coming out of the needle everytime I am starting the machine .....please someone help me
I don't know much but it sounds like the upper thread tension. It is adjusted by the vertical pink wheel towards the middle front. Should be a simple fix, just turn it and try on a scrap until it feeds correctly.
Both of my needles that it came with just bent ;v;” I’m using a quilted blanket so it might be too thick- but it did make a few good stitches so I think it might be something else :
What kind of snap on presser foot ARM do I need to buy? Every one I look at on Amazon says "NOT FOR MINI SEWING MACHINES" . I Need the actual presser food holder arm. I have the feet themselves but I lost my arm or holder whatever it's called.
Hi, I unscrewed the plate to get to my bobbin case as my thread was sooo jammed but now I can't get the case back in the correct way and there's no diagrams anywhere to see if I'm putting it back correctly. Now I can't get the plate back on 😭😭😱. I think the black bobbin case is wrong anyway as the top thread keeps getting caught in the bobbin case
Can you please show me how to take the bobin out first time to fill it up .I'm unable to take it out also The screw to change the needle is not moving to take the needle out 😔
I have a question please. I have this machine but my bobbin threading keeping balling up on the back of my material. It will sew 2 or 3 stitches and then stop because of the balling up of string on the back of the material. I thought maybe it was the tension on the bobbin thread but I do not see a way to adjust the bobbin tension. Have you had this issue with your machine? Thank you for your videos. They have helped me and I appreciate you!
I had this problem as well. This is called a "birds nest". I did a RU-vid search and learned how to avoid this from happening. Basically you must be sure that your presser foot is in the UP position when threading the machine. If it's down the tension discs will close and the thread is unable to pass between them. Simple as that! Give it a try.
I have a question, I can't find out how to use color threads and I can't find small top bobbins anyhow even in black and white, so how to change the color of the thread?
Just bought this machine but has no numbers for measuring on the needle plate, just lines. What are the measurements so I can write on it or can I replace it with one that has the measurements
A walking foot for a mini sewing machine, with hardly any throat space?? Can you imagine how small that walking foot would have to be. I wonder if someone ever thought of manufacturing a smaller walking foot?? I would love to see someone actually make something on the little sewing machine. Could sew a small doll dress--just so that we can see a finished product.
Can you please specify what types of presser feet this machine can accommodate since there are various type available. just want to buy what is comptible with this 505A type sewing machine. thanks
what foot pedal supports this machine? The foot that came with this machine really sucks. I need a foot pedal that doesn't break and has pressure sensitivity (for sewing curves)
I bought this machine 2 weeks ago and am trying to make a tote bag. I was trying to make handles and could not sew 4 folds. How do I sew very thick part? Presser foot is absolutely flat since there is no bumps. Thick all the way. Or is this machine not capable of sewing very thick fabrick? Please help!
Gd pm maam ! I have a problem now regarding my newly ordered minisewing machine ,it wont run out, the upper part was clogged it wont push down the needle what will i do ?
...tengo la tensión del hilo superior en 1 y aún así, queda tensa (templada); desarme y el resorte está completamente extendido... Cuando y como se adquieren repuestos... Gracias...
It can be tricky to work out the cause without looking at how the machine has been threaded up and sewing with it myself. You can check that the machine has been threaded up correctly. See this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-p7gQvU1hSyo.html and ensure the presser foot is up when you are threading the top part of the machine. This will ensure the tension disks are open when you are threading the machine. Also, what type of thread are you using? I recommend using Gutterman all purpose thread. Also, check the tension is set on ‘4’ and test the machine using a straight stitch with cotton fabric. You can even try changing the needle and winding new thread onto your bobbin. Let me know how you go 😁
@@EasySewing4Beginners I have changed the needle, rethreaded the machine and still no use. I tried using the gutterman thread as well. And the tension dial is set at 4. It’s either bunching up at the bottom and not holding the stitch. I don’t know what’s wrong. Not sure if it’s a me problem or a machine problem. 😭
