This video will go over using a fiber laser rotary chuck with EZCAD2 with most chinese fiber lasers. The fiber laser shown in this video is a 50w OM Fiber Laser from Laguna Tools.
la mejor explicacion para usar la fibra laser, jamas puede encontrar un tutorial en espanol que te dijera todo lo que nos esenaste. saludos bendiciones
The rotor settings match the rotor driver settings which is built inside. You probably find some rotor settings here facebook.com/groups/368089227540080/
I think you would benefit from casting an epoxy mandrel for the various cups that you mark. It would save you most of the time you spend handling the workpieces. like 90%.
This is awesome! Thank you for the information. Question you were talking about split lines. I’m having that issue. How can I fix my timing so this doesn’t happen?
thank you so much for your help . I would like to you to show us the parameters for engraving a external pattern on a round band that fit all around Thank you
I’m the opposite, if I use a split mark such as 3mm then every 3mm it leaves a tiny gap in the engraving. But if I set the split mark to the same size as my line size (for example 0.02) then it engraves perfectly! Lol
HOLY HELL friend. Thank you so much. I've been smashing my face into the walls for a long time trying to figure this out and you did it for me. Thank you so much.
You should open the chuck more and then place your mug on the first actual notch of the jaws. Then your mug can be placed up against the face as intended and it will be concentric with the rotary. The way you are doing it you have to cross your fingers that it is concentric. If it isn't concentric then your surface will move away from your focal point and cause an inferior engraving for no reason.
Excellent video! How would you compare this to a standard co2 laser for tumblers? Which would be best for engraving in bulk? We are planning to purchase a traditional co2 laser with rotary tool.
I don't have a CO2 engraver so I can't comment. I know with some of the more difficult coatings, my fiber laser has no issues cutting through with no cleaning afterwards.
Thank you Sir for your video, learnt a lot from it. I still have a question though: how did you find your initial focus lenght of 465? I have a 30W Raycus with a 175x175 lenses that focuses at 160mm, then I add the hight of my rotary + cup & adjust my tower accordingly with DRO but still not working... Any thoughts on solving this problem? Tia
Great video just what I have been looking for just received my machine and learning everyday..one question why do my red lines go vertical and not horizontal?
In your video, you said something about having lines in your final drawing, what does the laser fire on and off have to be set at to get away from that happing? what else can I do to get a clean image?
The round head clamp is different on my rotary. How do I change the head from the one I have. It came with my laser. Mine doesn't have that big chuck key. It's just sprung.
I know this is an older video, so I hope you respond. But why did the change of diameter from yeti to arctic change the focal length? Please and thank you
Hi sir good evening..Nice job.sir I have a question possible to help me out My machine is 50w and I want gold and silver engraving and photos..possible to tell me how much speed and power and frequency I put.. Thanks
Bom dia!! Esse que esta sendo meu maior problema e o parâmetro do Rotativo ele fica copm umas linhas, se aumentar fica com maias aparência, nos copos cone da Stanley embaixo no fundo , fica muito junto e em cima na boca fica separados com linha maiores , como resolver ?
I tried using the 3mm split size on a a solid color object on the rotary and I get a noticeable line every 3mm instead of a solid object, what am I missing?
Hey man can you please make a video on how to cut and add details like this ? (Will leave link below) or maybe cut a shape and give it like mate finish?.
Hi Robert. This video is designed for people who already have an understanding of EZCAD2. Generally, people won't start with the rotary until they have a basic understanding of using their fiber laser with EZCAD2 to engrave flat objects. While I may create an EZCAD2 beginners video in the future, there are several other videos that cover this topic on RU-vid.
So this setting works pretty well for me but between each split there is a roughly .5 mm space that is not engraved. Any thoughts on how to eliminate these? I've had this thing for a year now and these have been the best setting so far but the image is still not coming out at a level of quality that I feel could be sold to my club members.
@7:02 you mention "if your laser start and laser stop are off it ill give you problems" how do you figure those setting out. I am trying to do a graphic similar to yours and i get gaps (3mm gaps) when the thing rotates
How did you get Ezcad to run on windows 10? mine fails out. Also can you please send me a screen shot of you setting parameters for the rotary section, I'm new to this and have a 30W Chinese laser system with alignment led's for height. Thank you
Yours might be fake card if yours fails out. I can point you to the EzCad forum where you could find the info of settings parameters. Search 'Ezcad2 Laser Users' on fb group.
i actually don't adjust the height of my galvo when i switch cups. everything is really +/- 5mm (20oz, 30oz, bottles, etc.). the red dot pointer is set for 110mm lens and i'm using a 300mm lens. i've disabled the red light pointer for focus and i actually test each lens for the optimum "height above material" focus distance and i keep records of that and adjust accordingly.
I know a fix for your 9.35 probleme.! There is a way to mark in 0.15 lines or 0.10 its just a trick. ^^ Select object / Ungroup / Hide / Mark Now your probleme is fixt!
