Thank you cole tool centre for this video I was searching how to setup my foot pedal for use as the marking button and you just blurted it out as soon as you started the software, it was exactly what I needed and now am using it to mark all my tools with my logo.
I have noticed that this type of machine has no covers on it. Is this dangerous? What if you slip and get your hand in the way? Also do you need to wear goggles when marking stainless or aluminium? Thanks for the video!
Goggles yes. You can look up videos of people putting their hands in front of the fiber laser and it not doing anything. This is even with those 1000w rust remover laser "guns". If you put your hand in front of a co2 laser you will get torched. lol
I ordered through an alibaba supplier when ordering ensure if purchasing a rotary attachment chec the software is suitable for doing graffic with solid fill and not miss Engraving where the attachment rotates.
Is seem the frequency the fibre laser uses has little or no effect on skin there are video's on RU-vid with people putting there hand in the beam. I tried marking acrylic, the aluminium underneath was marked with no effect on the acrylic.
I have the same machine but it only shows 1 red dot laser where do i setup settings to show 2 red dots get them aligned and show the red border where font will engrave? Thank you
Can this engrave stainless steel? I want to engrave metal business cards. Also, do you know if this is a QS or QB model laser, and from your knowledge which do you recommend.
Yes this can deep engrave most metals. I am unsure on the model sorry. Make sure if you buy a machine they sell you software hardware suitable for Graphix not just text if you intend to do any ROTARY engraving.
WTH? You completely skipped the part between unboxing and plugging it in! 🤦♀ I came here because no instructions on assembling the machine were given with mine.
I ordered through an alibaba supplier when ordering ensure if purchasing a rotary attachment check the software is suitable for doing graffic with solid fill and not miss Engraving where the attachment rotates.
Hello, we are a production factory.Are you interested in knowing? My contact information is attached below wechat/whatsapp/skype: +86 18563596493 or my Email rachelgao@qintanglaser.com
I seems to be OK but I only purchased as a demo machine to see how it performs and decide if I wanted to import. So I do not use very often and have my demo machine for sale.
Cole Tool Centre thanks for the reply, I’m think I’m going to go ahead and make the purchase for one, hopefully everything turns out well. No one seems to have this machine in my area
If you are going to purchase and want to use the rotary chuck with "graffic" confirm with the supplier that it will do graffic on rotary correctly without leaving lines the software they surplied with my machine was supposed to be capable but after a long period of trying the said I had to upgrade the main board and software to do graffic on rotary table without leaving lines when it rotated to next position. Rotary text is OK.
Hello, we are a production factory. Are you interested in knowing? My contact information is attached below wechat/whatsapp/skype: +86 18563596493 or my Email rachelgao@qintanglaser.com
Most pet tags are anodized aluminium which you can do with a much cheaper co2 laser the fibre laser is for marking directly on metal like stainless steel
I purchased from alibaba and imported as a sample to check quality and performance if you are in Australia I would be interested in selling my demo machine.
Hello, we are a production factory. Are you interested in knowing? My contact information is attached below wechat/whatsapp/skype: +86 18563596493 or my Email rachelgao@qintanglaser.com
