filling fractals with epoxy resin 

please don’t! fractal wood burning is incredibly dangerous and has a high chance of killing you, i recommend watching ann reardons video on it

That is the one thing I've been keeping to myself cause it's tricky af!! U need good seran wrap and patience plus a bondo spreader. Mix your colors and resin..let stand for 10 minutes than pour on spreader a d hold against bat. Spin bat slowly and spread as u work from one end to another. Keep adding epoxy as needed. One done wrap bat very tightly with wrap and tape each end. Wait 48rhs than u wrap and repeat process. Wrap again wait 48 hrs than unwrap and wait another 48..use 60grit sand paper and orbital sander to knock down most but not too much.than switch to 120 grit and regular vib sander. Once all cleaned coat 3 times with poly. I'll do a vid soon for ya..

We are on market place and Etsy.. familyfractalshighvoltagedesign@facebook.com I actually do have a Yankees piece right now with a thick coat of epoxy on top.. ✔️ it out mate.

So where your at is tricky.. u have 2 real options to get clear. First is use a buffer with a sanding head 3,000 grit or better wet sand. Than buff. Or second option is my route.. pour again use gloves a decent thick layer and use torch to remove bubbles. Afterwards 3 days later flip over and use a grinder with flat blade sanding head. Wipe down and maybe use some walrus oil on bottom. Top should be perfect if u can pour good mate.

@@jessemays6204 thanks, will try and revert 👍

I'll try something for ya .. 😊