Final Assembly .. FIRST START .. Top Speed RUN .. Kawasaki KE100

Подписаться 15 тыс.

Просмотров 10 тыс.

50% 1

Parts finally arrived for our Kawasaki KE100. Very exciting to get this thing back together, after it was assembled I tuned it up made sure the oil injector pump was working, then took it for a short ride around the yard. There was only one thing to do after that, see how fast it will go, so I took it for a top speed run and I was pleasantly surprised at how much power this bike had and how fast it went!! Repairing this bike was a challenge but well worth the effort! Thanks for watching!
Kawasaki KE100 Videos:
• KE100 Kawasaki LOCKED ...
‪@kentuckyyankee‬
#kE100 #kawasaki #topspeed

Авто/Мото

Опубликовано:

15 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 80

@AustinApologue 2 года назад

Awesome! I had an '85 KE100, put that thing through hell and high water (literally on the water), even raced it in enduros and would jump it up to 80 feet on a local MX track (to a smooth backside, no problem), and the engine and transmission survived everything a 12 to 15 year-old crazy kid in the country could throw at it. Most serious repair was simply replacing worn clutch plates! Proved to be far more reliable than my KX250, KX125, YZ250F, and so on.

@dutchmccutch615 Год назад

Makes me wanna look for another one of these bikes. My dad got me one from a guy he worked with out from under a guys back deck. Didnt run was all nasty me and my dad took it completely apart like u did and it ran like a champ. I used to let all my friends take turns on it and we would ride it all day all the time. I miss that thing alot it ran like a scalded dog every time.

@trumpateerstv 3 года назад

Nice Job. Got the same out of the year 1977, original paint and setup - this tiny little thing is always a great fun. Just consider to keep it....or deliver a bunch of fun to a new owner.

@kentuckyyankee 3 года назад

I actually like the way the older models look better, and you're right they are tons of fun!

@boots1807 3 года назад

i have an old ke100 and this video was helpful to putting my bike back together

@kentuckyyankee 3 года назад

Great! Glad to hear it

@markmoffett6813 3 года назад

Awesome video. I've always loved this bike , had two in the past , now I need another. Thanks again for the awesomeness. Mark from Maryland

@kentuckyyankee 3 года назад

Thank you! I was actually impressed by this bike it's pretty nice for only 100cc

@Nrgpack 3 года назад

Nice two-stroke runner...Good Job KY!!

@kentuckyyankee 3 года назад

Thank you! Pretty cool little bike!

@davidaldrich3488 3 года назад

" I just don't feel like it"....good enough for me......Your final speed run and into the woods you wore gloves....hopefully a helmet, etc. TY

@kentuckyyankee 3 года назад

Had fun with this bike, thanks for watching!

@jackrutherford-1 3 года назад

She's a ripper! Nice work.

@kentuckyyankee 3 года назад

Thank you 🧙‍♂️

@emmanueldtrino840 3 года назад

Nice video, here in Philippines we love 2 stroke too, especially when it comes to kawi's 100cc reason bcoz it is a strong & reliable engine💜

@kentuckyyankee 3 года назад

Great little bikes!

@brockett 3 года назад

Cheeky little bike back in top form. Well done.

@kentuckyyankee 3 года назад

Thanks few more things and this one would be pretty mint

@sidecar7714 3 года назад

Excellent post

@kentuckyyankee 3 года назад

Thank you!

@multijim666 3 года назад

Love your channel. Really entertaining & you can learn a lot. Keep up the good work sir 👍🏼🇬🇧

@kentuckyyankee 3 года назад

Thank you, appreciate that!

@demon817 2 года назад

Love it, thank for the memories. In 1973 I turned 15 living on Miami Beach and got a new KE100 my first bike it was an assume bike. I weighed very little so that thing hauled ass and did wheelies no problem. Rode it every day put a ton of miles on it never had an issue or brake down it started on every kick. I remember running 55 on I-95 got there in a flash, dont remember the top speed but it was up there I only weighed maybe 40 to 60 lbs. 1973 on my 16th birthday got my first RD350 and the beginning of a lot of bikes and fun. 🙂 😈

@kentuckyyankee 2 года назад

Thanks for sharing... wish I had a RD350 😂😂

@demon817 2 года назад

@@kentuckyyankee I still do 1974 cherry condition.

@kentuckyyankee 2 года назад

@@demon817 Nice!

@perfectmotoadventurespaulf1968 3 года назад

Awesome episode again. You are a maestro with the tools, jeez.

@kentuckyyankee 3 года назад

Thank you!

@joannemctiernan7804 Месяц назад

Exactly like mine! 🥰

@jimsr.4019 7 месяцев назад

I just bought one of these for our grandson, where is the best place to find parts ? Your channel is great for what I need...thanks

@elebeu 3 года назад

13:53, plus the exhaust is full of oil.

@karlwguitar 3 года назад

Great fun!

@kentuckyyankee 3 года назад

Just sold Karl belive it or not 5 minuites ago

@mitchell5126 2 года назад

Lol I have a 1997 KE100. That’s funny, my choke thing doesn’t stay up either. Always falls down, super annoying

@kentuckyyankee 2 года назад

Nice bikes tho, fun to ride!

@8-stinger-842 7 месяцев назад

I would absolutely love to have one of these bikes😢I was this close🤏🏼to having one but the guy selling the bike was highly unreliable,couldn't even get the bike in person for me to see so I ditched it....hopefully in the future I'll have the opportunity to get one❤

@TheWhippetmaster Год назад

@8;30 how did you determine the transmission was the bottom end and too much oil would hurt the rings?? Asking for a friend (my mechanic)?? Thanks, great video.

@darrylmain925 Месяц назад

fond memories, had an '82

@GatesRapes 2 года назад

Digging the rear turn signal ( s )

@kentuckyyankee 2 года назад

😂😂

@MrKerbywilkes 3 года назад

I just bought a KE100, first motorcycle I've owned as an adult. Great video, I learned a lot about how it works (I'm not that familiar with 2 strokes). Mine came without lights, or the speedometer. Any suggestions on how to find parts? I've checked ebay, but im not sure what fits.

@kentuckyyankee 3 года назад

Thanks, I'm not sure about parts I always try to get oem stuff but like you said hard to find, joining fb groups helps sometimes folks have parts and advise.

@chriswooden1354 2 года назад

Not sure if it is different but I have a 95 and that air filter is in wrong, mine still has the stick one the airbox and it should go in vertically.

@leerjet18 Год назад

Yes, he put it in wrong. Goodbye new top end parts.

@elkusinero6850 3 года назад

hi, im struggling looking for a spare parts for my ke100 back in the Philippines.. im looking for this item. head light speedo front shock set swing arm frond & rear fender signal light tail light exhaust pipe if you can send me the link boss thank you. much appreciated

@derekjackson2008 2 года назад

Man that oil going in the trans doesn’t lubricator the crank. It just is there for the wet clutch and transmission gears the crank is lubricated with 2 stroke oil

@blairdelnero2762 2 года назад

Nice top speed

@blairdelnero2762 2 года назад

Mine will do 55

@kentuckyyankee 2 года назад

Awesome little bikes!

@SkylerFleury Месяц назад

Did you do any ignition timing after assembly, or did you just stick the flywheel on and it ran?

@kentuckyyankee Месяц назад

@@SkylerFleury Just ran

@blairdelnero2762 9 месяцев назад

Yes crucial gap plugs

@ribalderr6052 2 года назад

as to final comment, on Kawys, I had a an earlier model of this as a teen, carb was in the right place. Three Kawys in the garage rn. (for dirt, its the KLX 300) yes, enduro, not dual-sport damit. 2021 an it only does 80!.

@kentuckyyankee 2 года назад

Fair enough 🙂

@pirefarzane7954 2 года назад

Cool man

@kentuckyyankee 2 года назад

Thanks!

@SkylerFleury Месяц назад

I have a 2001 KE100 that ran before I replaced the crank bearings and seals. Now it will only fire with starting fluid. I have a new, clean carb, but it still refuses to suck fuel from it. I made sure the rotary disc was in correct, but it still won’t run off the carb. I have searched all over the internet and can’t find an answer, other than clean the carb jets. Any help would be greatly appreciated. God bless.

@GatesRapes 2 года назад

Don't forget those rings have a letter stamped on them,,, letter side up

@itz_soul6968 3 года назад

Where did you find the repair parts I have a 2000 ke100 with a blown motor and can’t find any reliable sites

@kentuckyyankee 3 года назад

Different places, I can't remember but some parts where difficult to get.

@itz_soul6968 3 года назад

@@kentuckyyankee yeah I need a hug and head and no where lol

@kentuckyyankee 3 года назад

@@itz_soul6968 You can find them just tough

@sanurajsinha179 3 года назад

You belongs to which country

@jamiefiddes4108 2 года назад

Really excellent series of videos man, gave me the confidence to set about my crank bearings... Not quite as 'easy going' as yours...but on home straight thanks to you! Hey, What'd you use to flush out that tank? (Muriatic acid 'n' bicarb..?) Loved your troll comment! ;)

@kentuckyyankee 2 года назад

Thanks! Glad your getting your bike going! I use milkstone acid but I have used muriatic acid

@blairdelnero2762 9 месяцев назад

Torq to the threads strip

@alexanderwillis77 3 года назад

Do you have the stock sprocket setup?

@kentuckyyankee 3 года назад

Yes I believe it is stock

@mgc6813 2 года назад

Wondering what you used to clean out the tank???

@kentuckyyankee 2 года назад

Milkstone acid is what I have been using

@v0id168 3 года назад

Do you think this bike would fit a 5’0” kid

@kentuckyyankee 3 года назад

I'm 5'7" Idk when I was 5' I woulda rode it.

@v0id168 3 года назад

@@kentuckyyankee ok thanks

@Douknowgregg 2 месяца назад

Air filter was installed incorrectly it needs to be installed vertically

@PauloAlves-kd3jn Год назад

Muito bem.

@kentuckyyankee Год назад

Thank you!!

@randomcol1378 3 года назад

Great bike I reckon it would hit 70 if you put your chin on the tank😎

@kentuckyyankee 3 года назад

Yep! 😂

@Veryfastslowcar66 2 месяца назад

Sorry to say mate but you put the air filter in the wrong way, the rubber seals sit against the intake hole and too of the air cleaner. Your current setup will not do any filtration whatsoever. Please check your facts before you share them with the world.