Finally Testing the Gulikit Hall Effect Sticks 

Those are revision A joysticks as the Gulikit stamp is on the top black portion. The revision B are stamped on the metal sides. Issues have been fixed in revision B.

What I want to see is a stress test Just absolutely go ham with them to see if they really will hold up over time

I just ordered and installed my set. So far I am satisfied with how they perform. My Veanic sticks were already drifting after a year after installing so I seen some videos of these with hall effect. I have to add they do add in some adhesive rings to cover the gaps but 1) they are not large enough to slip over the analog thump grips and 2) it is hardly noticeable when everything is put together. Also, now I have 3 sets of tools from ordering analog sticks😅

I ordered mine 3 weeks ago, they arrived very fast, and both my sticks have no click problems. They work like a dream

finally someone mentions the texture of them. i was surprised to have gotten these and notice how different they were, and that nobody else was taking note of that

Play it for a few weeks and the click goes away

My first set failed badly, unfortunately, with the stick on the right side failing to register a "down press" / right stick push, after about a month of Splatoon play. So I guess you'll tell us how the durability is with your pair over time.

fixed my original switch lite stick without any guides lol my guess is that dust went in and mess up with the sensors, or the metal contact part bent after long time of use, the contacts become less. rather hard fix since its difficult to disassemble. now it work flawlessly

Thanks for the video pal, i haven't found a video for make the replacement in a Nintendo Switch Lite, i already know how to do the tearing of the console but it would be nice to have a reference to watch while doing it.

Mine got here a couple of weeks ago. No clicks or weird problems, also came already calibrated. Hope I just got lucky and didn't get a fake one lol

Had the click on both sticks, so looking into getting a replacement set.

amazing!

I bought 4 of these, and 3 of 4 didn't work correctly. One was barely off center in the start, but impossible to calibrate. It was still usable though. Another one one kept giving alternating readings in the opposite direction of where I was holding making it completely useless, and the third always registered full left deflection, meaning the switch would never recognize it as being pushed to the right when calibrating, so it couldn't calibrate. In the end only 2/4 were usable, and only 1/4 worked as expected. I unfortunately received them late and was not able to get a refund. I still have some joy cons that drift, and REALLY want to get some of these sticks and have them work, but am afraid I'll have the same experience.

Is the deadzone smaller than original? By how much?

I just wish they would sell their switch-pto controller with licensed Xbox firmware on it.

I have a 3rd Party Joycon with RGB Lights, while it looks exactly like a Joycon, opening it is kind of different to other Official Joycons, I'm interested in getting Hall Sensors and applying them to my 3rd Party Joycon but I'm curious if it fits, I'm pretty sure it would work but I just wanted to make sure anyway.

I had them for like a week, only a couple of hours of play time - Mario Kart, Super Mario bros Wonder, a little bit of smash bros, Zelda, Wario, etc... And it is horrible to my experience. The sticks and caps themselves are very fragile, the plastic is thin and started to crack and even break at the base, of the stick of just a few hours of gameplay. I wasn't abusing them, just using them as I normally would. If this means that every few weeks or month I have to replace the stick with new ones, no thanks. Not to mention that the cap is very slippery and basically had to use thumb grips to solve that. One of the analog sticks wouldn't even fully register when pushing all the way down, even after calibrating multiple times. I ended up returning them. A good solution, but poorly executed with a lot of its own problems.

but how is the resistance? I've heard that it doesn't feel the same, that it is like sliding. that you don't get the friction that you would get when the joy con rubbs against something. does it feel responsive overall?

I've had mine for a month now. Really had no issues with them. Probably see down the road if any does pop up

Rapaz tu é brasileiro é? Seus vídeos são ótimo cara, de tão bem detalhado e jurava que tu era estrangeiro 😅😅 Sem síndrome do vira lata, é que é MUITO difícil encontrar canais brasileiros que tem esse nível de detalhe na explicação. Brasileiro no geral joga fora manual de instrução rsrs Enfim, bom trabalho 👍

Hoping them to make the version for meta quest!!!

Interesting

6:11 Hey do you have any instructions on how to do this or have a link to a procedure? I really like the grippy original caps but I also want hall effect. Nice video too 👏

Is this kit the solution for drifting shit issue!! I hope you tell us how this kit still doing till today.

Can it be used in gamesir t4 pro

Is it true they made a Version 2 of these sticks? The first version had a clicking/grinding issue

Hey, could you tell me if after they the battery run out or when you turn off and on, did the joycons discalibrate?

i think ill wait for the 2nd batch for them to fix the hole gap and the clicking/jumping issue does anyone know when theyll sell the 2nd batch?? cos i dont wnna order one and get the 1st batch sticks with these issues thx

My pair got a clicking sound 😑. Does it affect the control in-game?

aww. aren't they the ones who have magnetic joysticks?

Hey VK, could you make a video to see if the sticks from the rp4/rp4pro would work in the joy-cons? it’s just an idea I had but I have no way to test it

After the fourth month, my joyconn with Gulikit hall sensor joystick started drifting. this was when i was currently playing zelda tears of the kingdom. it isn't worth the money.

Can you use these to switch out pro controllers?

is there any good hall effect sticks for the xbox elite series 2 controller

I expected to have problems with this with amiibo before, and now I do have problems with amiibo, are you having issues with it too?

You wouldnt fry the motherboard, youd just short the battery. (At least it didnt do any damage to mine, no one blame me if there is something I am not aware of and they fry one)

Tem desses magnéticos pra substituir no pro controller do switch?

Does the Switch tell you to calibrate the sticks every time you turn the system on?

Did you ever get the new units?

wait a minute are u brazilian too?

Any news about your normal size joysticks from the other video ? Did u get a refund ?

do these work for the pro controllers

Has anyone done some deep investigation into, very specifically, what goes wrong with the original Joy-Con sticks to cause the drift? Is it a chip gone bad or perhaps there's something physical that could be fixed manually? I also wonder if now, Nintendo has fixed this problem with new units. I just bought the OLED Switch a week ago. No issues... yet.... but I do like to be prepared.

curitiba? tu é brasileiro?

Unfortunately I just bought a pair of 6 joycon replacements, but I'm sure they won't last long.

hey bro, are you brazilian? curitiba really fuck-it with our plans, yeah? um salve aqui do rj, camarada

Você é brasileiro? Não sabia

They took forever to get to you and they have the clicking defect 💀

That background noise makes this video unwatchable to me.

Would this work on the Switch Lite