FINALLY! The Fast & Furious Charger Shreds on the Dyno! 

Dom... YOU WERE RIGHT! "It had so much torque, the chassis twisted coming off the line!" (Barely kept it on the dyno😮)

Thank you for not putting music during the dyno session ! That v8 makes perfect music 👌

that's an insane torque band lol never seen one like that

that charger is gonna look insane next to the supra. can’t wait to see the iconic train race soon

nothing better to watch than KFC Collonel and Robbie Williams building a huuuge supercharger on a cammed V8! love it

Just throwing this out there to try and be helpful, as it was mentioned, you will DEFINITELY want a burst panel or a pop-off valve. You could have one false start and permanently damage both the blower and even the valves on your motor without one. Another side note with your idle issues and concerns about not moving at idle, I recommend getting a higher stall converter for the transmission so you don't have to try and choke the motor to keep it under control. Tons of great companies out there can make a torque converter with the correct stall for your application if you tell them what your setup is(engine combo, transmission, rear gears and tire size etc). Blowers are good fun but can go south quick if you don't take the right precautions, wish you guys the best of luck with this build! EDIT: I did see the comments regarding the intake and you guys have one on the way, good to hear. If you really want to get down to the nitty gritty, you can contact people from TBS, RBS, Good Vibrations Motorsports, etc etc for tons of helpful blower info.

It made pretty good torque, but overall I’m not impressed with the 700 horsepower. Guys are getting well over 1000 horses out of a small block Coyote with stock block, heads, and cams. For the money and with how bizarre this Hemi looks, it just isn’t over-the-top as I was expecting…… Sick build nonetheless! It looks just like Doms car from the movie!!

When the charger and Supra are finished you should do a video where the cars have a rematch drag race.

Undisclosed location huh? I’m guessing these cars are going to make an appearance in the new instalment of the F&F franchise- hope I’m right!

Thanks for putting the correct generation hemi in it ! When I saw that old 392 gen 1 in the movie I almost cried the Chevy guys didn't know why I was upset all I told them was the distributor is in the back . Still think they don't get it

At first I was skeptical when the old timer was talking about the burst plate on his 500 C.I Hemi.... And then this man proceeds to just nonchalantly show his 500 C.I Hemi like it's a model engine he put together from a kit.. Remember kids, never judge an old timer by the length of his pony tail because he might just have a 500 C.I blown Hemi in his garage lol

Dom:You know what's her best time 1/4 miles?9 second flat

Simply a fabulous build! Please don’t take this as nitpicking. I’m just curious, was there a technical reason behind going with the Weiand blower over the Mooneyham? Again, Bravo!! Well done! You knocked this one out of the ballpark!! ❤

7:12 checking for leaks 👌🏻

Big Torque as well with 900 Horsepower. 9:58 Corn Juice.. that funny.

💪🏻🙌🏻💯

The engine sound is music to my ears 👍

That thing is stoopid 🤘🤘 i want it 😂 my dream car besides an 80s countach is a 69-70 charger. Enjoy that beast. Watching it twist on the dyno, holy crap 🤘🤘

I wanna 69 dodge charger r/t to build I'm an a Ase certified Automotive technician myself & love your channel you have a new subscriber here brotha. 😊

What mufflers did you guys use? It sounds amazing!

Man how i love these outtakes

Nice Hemi perfect platform for her. Tons of torque and tons of fun.

The old timer seems to know what he is talking about. Wonder what the NHRA guys think about the pressure release?

Rick sounds like the type of guy that you could strike up a conversation about cars and engines with over a beer, and next thing you realise you've just drained the whole case of beer.

Are we gonna see a real race between this beast and supra like FF1 and see whos gonna win would be iconic,I would love to see that,I really do enjoy your chanel

It’s crazy that’s still less than the latest demon challenger Still sounds better though

Love to see a Richard Holdener review of this setup :D

I can't wait to see it at the sema❤

It was built for show not for go.

Perfect replica from movie everything you found is great amazing.😮

I hope the charger and the supra will race

Hey, that was Steve Brule back there. What up big dog? Still got your tune and the engine is running fantastic.

Damn, I hope that dyno was over 18!

Moving the injectors into the intake runners to care of a lot issues. Quite the task to do this but paid great dividends.

Sounds like a BEAST!

You built a blown motor without a burst panel. That thing goes lean and the blower is 60ft in the air and your motor is done. My hemi has one in my 70 charger. So get one before you hit the street.

Sounds like a beast

WOW It looks and sounds exacly like in the movie! Can't wait to see it drag race with SuuuuuupraAAA! :) great job !

I would put the fattest tires on the back lol 😂

727hp. That's a depressingly low horsepower figure for an engine this expensive and this hyped. I've seen 900+ out of a blown junkyard 454. Granted, I don't know how long that 454 was going to last. The caltracks are a welcome sight. I hope you take what that old dude with the ponytail says to heart

That is one of the most beautiful machines I have ever seen however that is the most heavenly machines I have ever HEARD, Good LORD. I BELIEVE THIS MIGHT TOP THE SUPRA AND I LOVE THE SUPRA, BUT THIS IS JUST........DUDE beautiful, it sounds exactly like the movie

I'm a big fan of that car. I have everything in models and toy cars of it. Very cool bro.

750 horse and almost 900 Foot pounds of torque.. your welcome

Everybody gets an F here and in the comments, in the race - they used a Chevy motor 😂 Also 900 hp id ok but a far cry from good now days, 3000hp is good now, not great though. Nice car though for sure, I would love it all day. @#$# the details, the car is cool 🤗

It’s a beauty build but the figures are a bit underwhelming. For a build of this level. 700bhp is standard on most lightly tuned cars and 1000 is even common on a modern bmw. I would expect this to be a 1200bhp car

Im trying to use yall data for the assetto corsa version. So 940 lbs of torque at 3500 RPM, HP@rpm?, redline rpm? gear ratio? 10-12psi boost? What rpm is full boost. Lol care to share? Im dying to beat this car down virtually

Good luck working on the configuration 850hp runnen 8PSI to your 5PSI at a respectable 720hp, seems like youve got room for improvement and by the sounds of it, plenty more money to spend

So much torque I bet the chassis twists coming of the line xD

Still wasn't faster than Loki's ride moto RX pull the 5.9. If you didn't know that's the two minute car in the first movie of the fast and the furious

That thing deserves a Hub dyno!

But how come the tires arn't smoking on the dyno like they do in the movie. I thought only turbo cars start dynos at 3500rpm to hide the lag?

I entered to win this car for my uncle. He is a very big Mo Par Fan.His dream car, and we love what all you do

Incredible...just incredible! Guys! Thx

These guys don’t know what a burst panel is. Most of em u have to replace when they blow.

wicked

Now can it do a street wheelie?! ❤

You guys are the best, I just enjoy watching you all have fun

I know the answer it to my question will be because we can, but I’m still gonna ask why😂

Been waiting to see this for 25 years.

I am smiling so hard my face hurts.

If you never driven a blower motor its a Horse of a different color shifter needs to be easy rocked back and into drive

finely Wetech doing something that isn't a junkyard turd

พลังV8ซุปเปอร์ชาร์จ ชอบสุดๆเลยครับ🤟🔥😍

The torque alone will beat most 1,000 horsepower cars.

940 fr lbs is almost 1300nm!! Amazing.

Vin diesel would be amazed.

Anyone else see how much the rear axle was rotating lol not good

Just imagine putting a Billet Engine. But making 727HP is insane coming from 1970s 🔥🔥🔥 I respect those who came before me. If it wasn't for our government we'd have way more powerful daily driven cars

This is okay but Eleanor builds get reposed

Are you going to finish the 1970 charger soon ?

Can you actually drive that car on the street in California?

Han’s RX 7 please

meanwhile in kanzitstand ... there making truck parts out of cast iron slag boat anchors, held together with seaweed Elmer's glue hot air and a hammer, eats the seaweed glued to fixing it hearing the hot air and feeling the hammer for braking it 8 times in a row. 18'000psi tensile cast iron, a world moved away from quickly. legend of chrome, still is a mythical story their... all scrap metal goes into the pot no care for sorting refining or adding rare elements to meet graded standards... 300'000 miles, nothing broke only burned fuel... every time they use something, it brakes.

Oh come on dodge charger RT ssssstttttaaaaaaaaarrrrrrrrrrrrrtttttttttt.

8 lbs of boost? Anyone else watch this twice?

Before watching i am expecting 1500-1700 at the wheels

So lets just say if the car in the movie , if the super charger was actually working and the motor was built this is what it be like

The guy behind the wheel is scared to push throttle even on a dyno and also keeps doors open to abandon car ASAP. You need to show more love for this car. Sometimes you just need to manhandle machines to make them happy.

As a big FNF fan, I appreciate these builds so much! Thank you, Just Driven! It would be amazing to see Dom in this beast! ❤❤

Put a good wheel/slick on it so we can see the wheelie!

That engine wants to be in a truck so bad😢

Awesome! How much hp do you think it will make when tuned perfectly? Should be around 900+?

God I wish I could have a car like this

A trick I've used a hundred times, spraying ether or carb cleaner around the motor looking for vacuum leaks. Never seen that on a RU-vid video before, had to comment.

Thats man has been waiting for 10yrs to see someone get on that dyno that didnt have a blow off panel on thier blower just so theyd ask to see his. Hes been ready for years just to show off that keith black blown nascar engine with the side oiler.

Wow!!! It would be nice to get in touch with Vin Diesel to take it for a spin 🙏🏻😁, beastly car!

THE gears that stock in that car was for superspeedway you have a hard time driving it but stick a clutch in it and that Pistol grip much more drivable

Any updates on the charger or no?

Just like the real fast and the furious

tu vida vale menos de lo que vive esa maquina

Doing that stupid stuff on a chassis dyno is a good way to tear up a car, or maybe multiple cars

Man i love this charger

I hope i could ride one of this

That car will always be a beast can't wait to see the race against the supra, my mom's first car was 70 charger

Check out Nelson racing if West Tech is not able to deliver for the schedule time.

We didnt have the parts Vega converter in PG .But you have a huge intake its got to be rich

I'd put a couple of heat sinks in the fuel lines one after the pump by the fuel cell & one just before intake

I have to ask. If someone brought u a charger how much would it cost to replicate

Awesome content as usual... but at 15.59, that's a work of art master of tetris. Lol

Awesome video! Please check out my 1968 Barracuda fastback powered by a 512 stroker, backed by an A833 4 speed manual. I think you'll approve. 👍