Finalmouse Ultralight X SECRETS EXPOSED: Upgraded Internals Revealed!

Подписаться 39 тыс.

Просмотров 9 тыс.

50% 1

Uncover the hidden facets of the Finalmouse Ultralight X in our latest teardown. This gaming mouse is making waves in 2023, but is it the best gaming mouse of the year?
🎥 Stream: / beardedbob
Elevate Your Game with Beardedbob's Gear:
🛒 Shop Now: shop.beardedbob.com/
🛠️ Top Gaming Tools: shop.beardedbob.com/collectio...
Stay in the Loop with Beardedbob:
🌐 Website: beardedbob.com/
🎮 Gaming Channel: bit.ly/2ZaHoBE
📺 Twitch Streams: / beardedbob
📸 Instagram: bit.ly/36Vzqik
🕹️ TikTok: t.co/U9X6cbSDxX?amp=1
💬 Discord Community: / discord
📊 Test Measurements Explained: bit.ly/2PgX4lt
⏱️TimeStamps
00:40 taking out the skates (measure and weight)
02:05 unscrewing the base
03:06 first look inside
03:25 the shell
03:56 taking out the side buttons
04:16 weight of the side buttons
04:48 taking apart the rear shell
05:47 weight of the rear shell
05:53 taking out the main buttons
06:50 weight of the main buttons
06:55 the shell
07:13 looking the internals
07:44 all about the battery
08:37 weight comparison old vs new battery
09:25 glued pcb
10:11 taking out the pcb
10:25 all about the scrollwheel
11:02 all about the pcb
12:10 weight of the pcb
12:17 the base
Music by NoCopyrightSounds: iTunes Stream: apple.co/1GxoyZd
#review #Finalmouse #gamingmouse

Наука

Опубликовано:

11 янв 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 59

@DJaquithFL 6 месяцев назад

The Finalmouse is made from cheap injected Fiber-reinforced plastics (FRP) with carbon fiber as opposed to the norm of fiberglass. The ULX is f-a-r from vacuum molded carbon fiber sheets as you would find in a Zaunkoenig M2K mouse.

@DJaquithFL 6 месяцев назад

.. My preference for an encoder is the TTC Silver, the more tactile the better. I use it for switching weapons. My preference for mechanical mouse switches are the TTC Dustproof Gold 60M. The ULX is supposed to be updated with different adhesion for the battery, the older sheet adhesive as in your video is a dust collector. The update is supposed to correct this problem but we'll see. If not, I'll remove it and use a brushed-on adhesive like rubber cement.

@thinkforyourself5672 6 месяцев назад

I swear I used to see you all over the comments from vape reviews years and years ago. Now I see you on all the mouse videos and I think some detailing videos as well.

@DJaquithFL 6 месяцев назад

@@thinkforyourself5672 .. I'm still vaping and you? I take my hobbies seriously to the extreme. I want to know everything I can and experience everything with whatever I'm interested in at the time. You've got one life.

@DJaquithFL 6 месяцев назад

@@thinkforyourself5672 .. I take everything that I do into the extreme. I want to know everything I can and find the best. Are you still vaping?

@Shyvorix 6 месяцев назад

@DJaquithFL Yea this uses either the kailh black or Grey for encoder and omron 20m for mains. I know some prefer blue shell pink dots for the switches but I don't want my clicks to be overly light which is why I've been hesitant to swap them. The encoder I kinda want a less tactile one since stronger encoders tend to be easier to stick between notches but dunno yet. And for the carbon yea, but that actual carbon fiber sheeting is most of why the m3k is over 300 bucks. Have fun doing the same for a more "normal" mouse shell without the cost blowing up.

@TY-fy4of 3 месяца назад

Hi- i couldnt figure out from the video which screws you tighten to fix the mouse button wobble? You didnt really show them screws. Is there anyway you could clarify where these screws are and how to tighten them?

@Aerobrake 6 месяцев назад

Isnt the bottom adhesive and the white and red cables being addressed for batches 3 and on?

@InToXz 6 месяцев назад

is it possible to use the ulx with starlight shell?

@b7shoota 5 месяцев назад

can anyone help me out with where i can find a scroll wheel replacement for this mouse.. i want a rubber wheel but not sure if the air 58 or UL2 wheel will fit. please helpppp.

@CRsev3n 3 месяца назад

can anyone tell me if i can swap the internals between ultralight x and a starlight? if yes, does it matter if one is M and the other S or is the pcb the same?

@alanismajere 8 дней назад

What is the jst size on the battery?

@twaydo 6 месяцев назад

unrelated but what is that blue carbon fiber Fnatic Bolt i see?

@IsmaK 6 месяцев назад

According to finalboy the battery came over specced at 280-290mah. They will try to reduce the weight in that area for future batches by bringing the capacity down to 250mah and using a lighter battery foam.

@sakanhango3105 6 месяцев назад

the day it becomes 7-10gr, 50mah would be their next destination

@DutchLaws 6 месяцев назад

@@sakanhango3105 tbf if u combine it with wireless charging mousepads this might not even matter.

@Beardedbob 6 месяцев назад

How do we test it? Compared to the other stock 250mah they use ok the starlight 12 this one in the ULX is smaller. Also it’s marked at 250mah 🤷🏼‍♂️

@iListRealEstate 6 месяцев назад

The voltage on the ULX battery is 3.87 instead of 3.7. I wonder if that's why they are saying it's overspec. That would make the ULX battery have .05 watts more than the 3.7v batt.

@wilazn 6 месяцев назад

anyone know if there are bigger skates that run along the whole bottom thyat fit? it would help cover up the double sided tape on the battery to prevent dust build up.

@ArtFiendz 4 месяца назад

You can actually put any skates you want because the bottom is completely flat.. you no long need a specific size.

@ArtFiendz 4 месяца назад

I just took some 3 inch carbon fiber tape to cover the bottom. it's nice and rigid and has good adhesive. I cut the perfect piece to fit on the bottom. it sits lower than the skates and doesn't block anything.

@RathOX 6 месяцев назад

Composite is PA-CF its nylon / CF

@Adept32k Месяц назад

I'm trying to repair my mwheel, does anyone know what adhesive they use to keep the pcb in the mouse? Gotta pull the whole damn thing out to replace the encoder

@Beardedbob Месяц назад

the adhesive what do you want to know? how to remove it? i did it in the teardown.

@Adept32k Месяц назад

@@Beardedbob thanks for the response, I was wondering what adhesive was used so that I can apply it back onto the pcb after switching out the encoder

@iParadiiise Месяц назад

@@Adept32khi, do you got a answer ? Want to swap my switches but the adhesive scary me a bit

@lucifervns 6 месяцев назад

Could you do about Vaxee ax outset wirreless that pro player zywoo is using it. Thanks

@TriTexz 6 месяцев назад

zywoo skilled player but this is not normally

@ShiverrsR6 5 месяцев назад

I wanna get one but i cant cuz they're out of stock and i cant just order one

@WindBecomesLightning 2 месяца назад

so the scroll wheel pops right out? you don't gotta unscrew anything?

@Beardedbob 2 месяца назад

you will need to unscrew the pcb and main shell

@WindBecomesLightning 2 месяца назад

@@Beardedbob im scared to mess something up, is there a timestamp in the video that shows how to do it?

@Jon_Cruz89 2 месяца назад

Yes you can just pull it out at an angle.

@SteveVall 5 месяцев назад

Is this the same scroll wheel dimensions as the Air58, or the UL2? @Beardedbob

@TehKevin10 6 месяцев назад

Which size is this one? Small or Medium?

@MaverixGT 6 месяцев назад

Medium. Small and Large have not been shipped out yet. That will be in Feb/Mar.

@Beardedbob 6 месяцев назад

Medium

@Bombilakus 6 месяцев назад

When do we start to see diminishing returns on this weight reduction craze?

@Beardedbob 6 месяцев назад

It’s up to you, what weight don’t you like

@ninjamin_ 6 месяцев назад

Weight doesn't have a diminishing return

@NeoCyrus777 6 месяцев назад

I can't stand Chinese Omron 20s. The first thing I did with my GPX is replace that trash.

@Silicon_0014 6 месяцев назад

Did the same. Japanese Omrons?

@tugzz4849 4 месяца назад

You can't stand the feeling of it or the quality of it? I have had 3 mouse with the same switches having crazy double clicking issues

@lancemartinez1130 4 месяца назад

Im appaled that a skeletonized mouse like that still needs you to peel off the skates to get inside of it

@athan1281 6 месяцев назад

Good job on guessing 7grams

@ArtFiendz 4 месяца назад

Your scroll wheel is rubber????? Why is mine hard slick plastic. I can't stand it.

@paul2609 6 месяцев назад

I think it's not allowed to hide the colours of the cables and/or wrap it for regulation purposes.

@Beardedbob 6 месяцев назад

Sole companies have but could be

@PapaJuan 6 месяцев назад

They are making the cables black for the next batches

@firestroke6240 6 месяцев назад

Why all his video quality is so bad? can't see anything, my phone camera is much better than this crap.

@MedicLmao 6 месяцев назад

That’s just u lmao

@JohnDoe-vt6zm Месяц назад

looks fine to me ..