Fine Tune Your Tonex Pedal To PERFECTION!! | Set Your Input Trim PROPERLY!

Подписаться 42 тыс.

Просмотров 10 тыс.

50% 1

#tonex #tonexpedal #ikmultimedia
Line 6 Marketplace Presets: bit.ly/line6marketplace-sadites
Helix Ultimate Complete Presets Vol. 1-7: bit.ly/3xuAD30 (NEW)
Helix Ultimate Complete Presets Vol. 1-6: bit.ly/3IRjVwz
Tonex Tone Models: bit.ly/tonexpresets
Tonex ToneNet Tone Models: bit.ly/3JosdwY
Quad Cortex Presets & Captures: bit.ly/4dFDG92
Kemper Rigs/Profiles: bit.ly/3shWRTe
IK Multimedia Affiliate Links:
Tonex Pedal: bit.ly/40XKEj7
IK Multimedia Amplitube 5: bit.ly/3y02IfR
IK Multimedia Tonex: bit.ly/3Srb0pc
Join this channel to get access to perks:
/ @jasonsadites
In this video I take an in-depth look at how we can fine tune our Tonex Pedal so we get exactly what we need and want from it. There is still a lot of confusion concerning where the global input trim should be set and here, we are going to come up with a method that will be a fool proof way of using it in the way you need it to work for your use case that will allow you to get exactly the results you need. I really hope you enjoy the video.
Tonex - Mars 74x Ultimate Tone Models: bit.ly/3PNPsUR
As always, thanks so much for watching...
Please visit my sponsors:
Line 6: www.line6.com
Vigier Guitars: www.vigierguitars.com
Mission Engineering: www.missionengineering.com
Morningstar FX: www.morningstarfx.com
Temple Audio: www.templeaudio.com
00:00 Introduction
03:57 Setting Up An Important Test
07:02 Measuring Tonex Pedal
19:48 How Does It All Sound
28:56 Conclusion
30:38 Mars 74x Tone Model Collection In The Mix

Видеоклипы

Опубликовано:

6 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 27

@TheFrozenDesert 9 месяцев назад

Nice job Jason, you are doing a great service for the Tonex community. This input trim thing really raises the question as to why IK allowed this to be a thing.

@pjmtry7 3 месяца назад

Wow the info! Now more adjustments! 😱

@fen3184 9 месяцев назад

Excellent, thank you.

@The_fuzz_buzz 9 месяцев назад

Good video! I’ve found that generally, there is a reason for default settings, haha. First thing I did for each of my TONEX’s was check the input trim and set it 0.0. I haven’t had any issue getting any captures to be exactly what I needed them to be. As you said, the gain knob can do so much for the sound of your capture. But beyond that too, if you’re really wishing you could push a capture that much harder, maybe you should just use a higher gained capture and make your life easier lol.

@shalomshalom735 5 месяцев назад

Truly a good video, but forgive my ignorance, I didn't quite understand what and how the first test-generator was set up. I don't have Cubase. I guess this can be set up in any daw, but what exactly do I set up. What does the voltmeter measuring? what goes into the instrument 1 input of the digital interface? I apologize, I didn't undersatnd how to set it up. Anyone can explain? THANK YOU.

@jcoufo 4 месяца назад

Thanks!

@JasonSadites 3 месяца назад

Thank you so much :-)

@marcohermans3207 5 месяцев назад

First of all thank you for uploading these incredible informative videos about Tonex. I wanna say that I'm a home recorder who wants to get the most out of it . This calibrating stuff is very interesting but I'm no audio engineer as most of us aren't . We used to set our Interface input gain so that is was not clipping. That is what the compagnies said was the best thing to do. Lately there is much of a discussion how to set your interface level properly. The latest Rhett Shull and john Nathan Cordy videos talked about this matter a lot but that was all about Neural DSP stuff but it relates to other amp sims also. You talk about dBu and dBfs and headroom and calibrating the pedal but IMHO you're gonna way to fast for a lot of people out there, including myself. Firstly I want to calibrate my own Interface , the Tonex pedal comes later. I managed to get a 0,775V AC voltage out of my Motu M4 output with my test generator set in reaper at -10.1 db. And then I lost you ... I have to feed this signal to into the input of the Motu M4 if I understand correctly but what am I aiming for? Sure I'm missing something here ,I am not meaning to be rude or something but a tutorial for dummies would be welcome if it's possible.

@JasonSadites 5 месяцев назад

I really can't make it any easier than I did in the video unfortunately. You are on the right track. Now take the 0 dbu signal you have coming out of your interface and plug that into your Instrument in on your M4. After that check what dbfs level that is on that input in Reaper. I aim for -11 or -12 dbfs. Once you have that that will equal in and around having Input Trim on your pedal set to -3.0 db. Hope that helps :-)

@josiahs7917 4 месяца назад

Hey i have the same interface, did you ever figure this out? Thanks

@marcohermans3207 4 месяца назад

@@josiahs7917, yes I did. I followed the instructions from Jason and I finally found that the input gain knob needs to be set beyween 8 and 9 o clock. That equals - 11,4 dbfs in reaper.

@yuanwang5763 9 месяцев назад

hello man, If you are using a model captured by someone else, would you set the input trim -3db into or 0db?

@MarkDanielsmusician 7 месяцев назад

Hi Jason, love your vids, strugling to follow this TBH, any chance you could go through it again, I know.... sorry, I have no idea what levels I run at into my AXE I/O, I usually just put it to about 9 o'clock or till to sounds good to me, how do I get this to the pedal, had it since day 1 but not gigged it yet.. cant seem to get the 2 to be consistently the same PC-Pedal

@tomoliver8976 8 месяцев назад

When you are using the Tonex Pedal into a computer, do you turn off the corresponding preset cab? To me it seems I am hearing both pedal and preset cabs. The gain and overdrive is massive.

@butchr7 9 месяцев назад

I use my ToneX live. I usually run my input at anywhere from +8 to 12.5 with my presets. Think I need to back down?

@chrjohns11 4 месяца назад

I have been experimenting with using Tonex as an overdrive pedal. However, the volume level when bypassed is higher than the instrument level guitar signal (maybe it's buffered, or simply outputting line level?). Would adjusting the input level down in the way you suggest also reduce the bypassed signal back down to instrument level?

@JarppiJakke 25 дней назад

If I use ToneX pedal in interface mode as my audio interface and audition different tones using 0dB input gain on ToneX software does that produce identical results while running that same tone in live mode and global input trim set to 0 ? Great content man!

@johnthebutcher8761 8 месяцев назад

My question is if you are using Tonex pedal in the loop of the HX Effects do you recommend still using the input trim at -3.0?

@321hp 7 месяцев назад

I’m wondering the same thing

@RusticSpirit 9 месяцев назад

So, what would you suggest for trim level when using Tonex Pedal in effects loop of Stomp XL?

@JasonSadites 9 месяцев назад

If it was me, I would keep it the same as I normally use it. Hope that helps :-)

@MarkDanielsmusician 8 месяцев назад

Hi Jason, would you leave this the same if in the loop of HXFX?..Cheers!!@@JasonSadites

@matthewlyons3426 9 месяцев назад

It would have been good to see what level the Tonex software is reporting on your input when doing a capture. I suspect that it's going to be saying 'too low' when in fact it's not too low at all. If you make a capture following the prompts for good levels from the Tonex software then that capture is going to be close to 0db and require 6-9db of input trim boost to get the same saturation. Would you agree that we should be ignoring the input level suggested by Tonex software as it's too high?

@JasonSadites 9 месяцев назад

Exactly. I completely ignore the suggested input level when making captures. I talked about it in a previous video. The input level is not part of the capture process.