Тёмный

Finwing Albabird - Foggy Flight - WTFOS & MSP-OSD Air Unit Video 

No Fly Drone
Подписаться 1,1 тыс.
Просмотров 789
50% 1

WTFOS with MSP-OSD and finally enjoying a true OSD in the DJI goggles. The video is from the air unit (not the goggles) for better resolution and bitrate. Tweaked the __main__.py to encode in native bitrate. Many thanks to the devs at fpv.wtf and Knifa for his work on osd-dump-tools. This is just the beginning of what can be done!
More info on the OSD here:
fpv.wtf/
github.com/fpv...
github.com/Kni...
ardupilot.org/...
Build List:
Finwing Albabird - www.finwinghob....
2x Sunnysky Specifically Design&supplied R2207 KV1300 Motors - www.finwinghob....
2x Crazepony Flycolor 50A Blheli_32 ESC - www.banggood.c....
Insta360 GO 2 64GB
RadioMaster TX16S Max - amzn.to/2MZ8xWc
Team Blacksheep TBS Crossfire TX - amzn.to/3qdFT1N
Team Blacksheep TBS Crossfire Diversity Nano RX - amzn.to/3bdp8hk
Matek F405 Wing running Arduplane v4.x - amzn.to/3g1lqrs or usa.banggood.c....
Matek 5v Buzzer - Matek 5v Buzzer - amzn.to/2E1Cosv or usa.banggood.c...
mRo I2C Airspeed Sensor JST-GH MS4525DO - store.mrobotic....
BN880 GPS/Compass - amzn.to/2LKQSke or www.banggood.c....
4x EMAX ES08MA II 12g Mini Metal Gear Analog Servo - amzn.to/39nmkgU or www.banggood.c....
DJI FPV Goggles V2 - amzn.to/3s0sbjA
DJI FPV Air Unit - amzn.to/2ZgWUge
2x TrueRC X-AIR 5.8 FOR DJI FPV LHCP Antennas on Goggles
Albabird DJI FPV Canopy - www.thingivers....
JX Servo PDI-9180MG 12g 180 Degree MG Metal Gear Analog Servo 2.0kg for pan - www.banggood.c....
Random 9g servo for tilt

Опубликовано:

 

20 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 27   
@W3ASR
@W3ASR Год назад
Another great flight! Nice video and visuals.
@AerialWaviator
@AerialWaviator Год назад
A fun flight. Will be revisiting once winter sets in, as such nice colorful and views.
@NoFlyDrone
@NoFlyDrone Год назад
You're just like me when it comes to watching old videos once winter sets in 😀
@nighthawkvs
@nighthawkvs Год назад
Fog was fun while it lasted. :)
@NoFlyDrone
@NoFlyDrone Год назад
Yeah it burned off quickly!
@DJI_Silesia
@DJI_Silesia Год назад
I'm jealous on your current consumption. I got F90 1300kv motors with 8x5 Eprops and my cruise at 55kmh is more like 6A.
@NoFlyDrone
@NoFlyDrone Год назад
Yeah depending on conditions it can cruise very efficiently. I'm just on stock motors and Aeronaut CAM carbon 8x4.5 props. I have some Racerstar AirA 2508 1200KVs that I want to try in another build but honestly I love the balance between efficiency and power on-tap with the stock motors.
@DJI_Silesia
@DJI_Silesia Год назад
@@NoFlyDrone I'd like to avoid buying motors from finwing for shipping time, got some Geprc 2306.5 1350kv ones, they might be more similar to the Sunnysky Finwing uses. Maybe this is the way :) or Sunnysky 2212 1250kv, got a pair of them too.
@NoFlyDrone
@NoFlyDrone Год назад
@@DJI_Silesia Just order a spare Alba and some motors and forget about it 😂 When it shows up one day it will be a nice surprise! I bet the 2306.5's would be good!
@DJI_Silesia
@DJI_Silesia Год назад
@@NoFlyDrone Okay, do you maybe have an Xbird 800? Just to compare performances. Got one with the 2306.5 on 8x6 and it's pretty efficient.
@NoFlyDrone
@NoFlyDrone Год назад
@@DJI_Silesia I do but haven't built it yet.
@NunoFlyer
@NunoFlyer Год назад
Hello, Do you have any idea why the reason some elements not showing up after setup it on osd screen config tab ? Thanks, new subscriber
@NoFlyDrone
@NoFlyDrone Год назад
Did you set SERIALx_PROTOCOL = 42 and OSD_TYPE = 5 in your parameters?
@lightningfpv9012
@lightningfpv9012 Год назад
how can you overlay the OSD to the Air Unit onboard video? AFAIK we can only overlay to the DVR via knifa branch?
@NoFlyDrone
@NoFlyDrone Год назад
I use the AU video file and the osd dump tools command line (not web based). I'm not sure if recent enhancements to the web tool will work as I haven't tried it again in a couple months. Basically, it will work as long as you had good signal and no loss of packets/signal. Otherwise the timing will be off between the OSD file and the video file and your HUD items will not be in-sync with the video.
@shaneintegra
@shaneintegra Год назад
Wouldnt enabling FakeHD spread the OSD out and make it look better?
@NoFlyDrone
@NoFlyDrone Год назад
I'm running Arduplane so no need for FakeHD. I purposely laid the elements out this way because I like to have the information near the center so I don't have to move my eyes all over in the goggles. I could do some tweaking but this works for me.
@kenYTCA
@kenYTCA Год назад
Does the WTFOSD root allow you to record the osd to the goggles DVR Or was that information put on afterwards?
@NoFlyDrone
@NoFlyDrone Год назад
Yes and yes. The way it works is there an additional OSD file saved on the goggles along with the video file. OSD is displayed in real-time while flying however. You have to overlay the OSD to your video in order to share like I’ve done here.
@kenYTCA
@kenYTCA Год назад
@@NoFlyDrone awesome thanks for the information! Such a cool flight and love the fpv camera that you can move
@kenYTCA
@kenYTCA Год назад
@@NoFlyDrone hey sorry to resurrect this, but what is the name of the program that you use to put the osd back on the video?
@NoFlyDrone
@NoFlyDrone Год назад
@@kenYTCA knifa-develop.fpv.wtf/osd-overlay or github.com/Knifa/osd-dump-tools
@kenYTCA
@kenYTCA Год назад
@@NoFlyDrone awesome thanks!
@kotnapromke
@kotnapromke Год назад
Какой пропеллер?
@NoFlyDrone
@NoFlyDrone Год назад
Aeronaut Electric CAM Carbon Light 8x4.5
@kotnapromke
@kotnapromke Год назад
@@NoFlyDrone Спасибо.
Далее
National Seminar on Gravitational Waves
2:38:58
Просмотров 2,3 тыс.
Finwing Albabird - WTFOS & MSP-OSD Arduplane 4.4.0
5:11
Network Security - Deep Dive Replay
3:08:19
Просмотров 155 тыс.
Finwing AlbaBird Twin Motor
8:22
Просмотров 10 тыс.