Fireboard 2 Pro Install - Masterbuilt Gravity Series 800/1050

Подписаться 1,6 тыс.

Просмотров 35 тыс.

50% 1

Looking to upgrade your Masterbuilt Gravity Series 800/1050 smoker with a high-quality temperature control system? Check out our latest video on Smoking Meats BBQ, where we showcase the Fireboard Pro 2 install and provide our expert thoughts on why this upgrade is a must-have for serious BBQ enthusiasts.
In this video, we'll walk you through the overall installation process and provide you with a step-by-step guide on how to install the Fireboard Pro 2 into your smoker. Along the way, we'll also discuss the benefits of using a temperature control system and share our personal experience using this particular product.
For those looking to optimize their BBQ cooking experience, the Fireboard Pro 2 is a game-changer. With its advanced features and user-friendly interface, you'll be able to achieve precise temperature control and produce mouth-watering BBQ every time.
So if you're ready to take your BBQ game to the next level, be sure to check out our latest video on Smoking Meats BBQ and don't forget to like, subscribe, and share for more BBQ tips and tricks!
Get your fireboard here with a FREE Cable: thebbqhq.com/products/fireboa...
Get the Mount Here: www.etsy.com/listing/97309294...
***************************************************************************
Affiliate Links to Support the Channel:
Anker Power Bank used in this video: amzn.to/401fXbR
Extra Type K Connectors: amzn.to/41NJLKw
Masterbuilt Gravity Series Grills:
800: amzn.to/3inslSQ
1050: amzn.to/3FbtJRi
560: amzn.to/3VyfBqI
Great Brisket Knife:
amzn.to/3sEUk2l
Paring knife for trimming fat:
amzn.to/3gWz2KG
Beer Can Chicken holder:
amzn.to/3fnVSdN
Masterbuilt Gravity Series Cover:
amzn.to/3Dl0EAQ
***************************************************************************
Music Licenses from Adobe Stock:
ASLC-2094C583-5EC9FDA070
ASLC-20952003-0A7A9C24AD

Хобби

Опубликовано:

5 мар 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 144

@dymarke 5 месяцев назад

Your grill is so freaking clean!! Thanks for the vid.

@orlandomarrufo6523 2 месяца назад

Great Video Thank You. When needed I will be getting and installing the Fireboard Pro 2

@telco_dino Год назад

Thank you for doing this video. After watching your video numerous times, I am following your instructions to upgrade my 1050. I am also doing Klotesmod rear vent and front shelf extension, as well as LSS hopper lid liner. I found a way to mount the Fireboard 2 Pro ambient probe without taking it apart and keeping it movable. You have to destroy the MB oem ambient probe to salvage the small rectangular mounting plate. Once you have it, cut a small slit on the side next to the hole where the probe used to be. The slit only has to be large enough to slide the wire of the Fireboard through. After that you can pull the probe as you demonstrated to mount on the small plate and mount the small pate to the bracket.

@onotsamada 2 месяца назад

Awesome video I just got one today and it’s so sweet that you can set bbq temp vs meat temp and alerts for each channel or bbq temp and meat temp.

@rcg3496 Год назад

Good vid. Helped me select a master built. Thanks!

@Smokingmeatsbbq Год назад

Awesome! Welcome to the fun!

@unholy7324 Год назад

I must say I'm am not happy I found this video. See, I'm poor. I can't be spending an extra $300 on a brain for an already $799 grill. But I'm going to. Lol. You're the one that's going to have to live with it. 😊

@Smokingmeatsbbq Год назад

😜 love it! At least you can feel good knowing your gravity series will be unstoppable! #sorryaboutyourwallet

@GearJamminHank Год назад

😂😂😂😂

@RichLasVegas 7 месяцев назад

Thanks buddy, I just ordered my firebird and will be doing the conversion over the weekend. I hope it goes as smooth as yours seemed. Thx again for the video!

@Smokingmeatsbbq 7 месяцев назад

Good luck with the install! Ask away if you get stuck :)

@RichLasVegas 7 месяцев назад

I finished the install. I purchased the Fireboard 2 drive and purchased the holder thru Etsy. I will say this….I ABSOLUTELY LOVE THIS!! Thanks again

@Smokingmeatsbbq 7 месяцев назад

@@RichLasVegas woohoo! Now the fun begins 💨

@SpazzzzzTV 7 месяцев назад

ty for this video, def the set up i'm going for. I think i've about covered all my mods.

@Smokingmeatsbbq 7 месяцев назад

Have fun with your install! Love mine to this day!

@erichoover8576 8 месяцев назад

Love the Beretta hat!!

@catchbag1398 Год назад

Great video mate!

@Smokingmeatsbbq Год назад

Thanks!

@luvyesmusici4886 9 месяцев назад

Love my FireBoard. Finally looked at the predictive analysis the other night. Nice feature. You installed the FireBoard into the unit, why would you not install that power pack into as well. That is one thing I am not a big fan off using my Weber Summit Charcoal Grilling Center/ Kamado with table is having all the probe wires feeding through the top vents, and then sometimes you open the lid, it’s just too messy, or the wires aren’t long enough with my setup. That being said, if I go to a family cook elsewhere, I bring my FireBoard and probes with me, and just take over. The blower fir my non-pellet grill is absolutely essential for your long cooks. You are no more a hero hanging outside overnight with the cooker, than you are inside the house looking at all that is going on with your phone.

@Toxyethanol 10 месяцев назад

Nice hat 😎 92x never leaves my side

@tptwk Год назад

Cool tinkering job and I love the hat!

@Smokingmeatsbbq Год назад

Thanks! Clay shooter here :) Beretta for life!

@evimorrison5579 Год назад

Hey awesome video. I’m looking into this. With the original fireboard did you notice a temperature discrepancy between the ambient probe and the hood temp guage. I’m trying to get those closer matching as I think the hood guage is way more accurate. Any advice or help would be appreciated.

@Smokingmeatsbbq Год назад

Yes they aren’t even close physically so I assume there will always be a variance. I think Fireboard makes a hood probe but I haven’t spent time looking into that.

@YouDownWithJPD 10 месяцев назад

Great video! Do you have a link for the new ambient probe? Thanks!

@Smokingmeatsbbq 10 месяцев назад

It comes with the ambient :)

@jimoneill5696 Год назад

Since you have installed the fireboard would you say it can heat up grill just as fast as the MB controller? Fireboard says their controller has less power output than the MB. FB controller was designed for a small 20cfm fan motor vs MS large fan with 108 cfm. Also, have you experience any FB resets where the fan is shutdown for a period of? Great video!

@Smokingmeatsbbq Год назад

I would say its slower in general. The FB has programming to slow down if temps ramp too quickly. However if you are in a pinch, you can just set the fan to 100% manually and get it ripping hot quick. Personally I just fire up the grill and walk away for a while anyway to get cleaner smoke. I have had zero resets where the fan shuts down for a long time. As a note, I rarely just use the FB unit for power, I use a USB power bank capable of putting out 12v to run the system and keep it charged. The Fb will not run the fan at 100% with just its own power so you need that 12v input to get the max performance.

@user-bt9xj4er2i Год назад

Have you set an offset temp for the ambient probe? Assuming you figured out that the PID fan setting must be set to large, which means the minimum fan speed is 30%. Have u noticed a temp stability issue because of this? What Fireboard PID version have you settled on?

@Smokingmeatsbbq Год назад

I’m not running large fan size. This isn’t required in my opinion. The system can run the fan slower so the large fan size setting isn’t needed. I’m running the 3.0 pid. No offset temp setting here for ambient.

@mikeatlincoln Год назад

I would like your thoughts on temp control with the Fireboard 2 mod. I tested the setup before mounting the controller and ambient probe. Using the alligator clip I attached the ambient probe the the bracket where the MB probe was installed. Temps looks very good, including the lid thermometer. After the permanent install was done I ran a spatchcked chicken on the middle rack. It was a very windy and cold day. Temp set to 275 and I expected the lid temp to be in that ballpark. It was running 50 deg high. Today I am smoking some vegs for salsa at 225. I placed probe 2 on the ambient bracket and probe 3 in the middle of the chamber. Here is what I am seeing. Ambient = 225 , Probe 1 = 215 , Probe 3 = 239. I am thinking the ambient bracket is too cold due the close contact with the side of the chamber. Probe 2 is in direct contact with the bracket while the ambient Probe 1 has an air gap. I am thinking of adding some insulation between the bracket and the side of the chamber to reduce the effect of outside temps. Any thoughts on all of this?

@Smokingmeatsbbq Год назад

I firmly believe the major reason here is that on the grates, you are getting pretty direct heat from the diffuser and firebox. I also think that you could choose either one. Frankly, I know the cooker well enough from cooking it on the MB system that I know what "225" cooks like vs. 250. It may not be EXACT @ 225 where the meat sits, but I know it will be stable and I know how it will cook. I need to try what you are saying to see if there are differences in the way it cooks.

@yz450pro 9 дней назад

I can’t get mine to run more than 5v. Is there something I’m doing wrong?

@hfdsso14 Год назад

1st, do you have to bypass the door switchs to get the fireboard to work? If not why do you bypass them? 2nd, do the temp probes come with the yellow connectors or do you have to change them? I see you had a link to the yellow connectors. 3rd, what holds the fireboard in the mount?

@Smokingmeatsbbq Год назад

You technically don’t need to bypass them, I just wanted to. If you buy the pro, you get the yellow type connectors. It’s a mount from Etsy, I think I linked to it as well :)

@lrodriguezvideo Год назад

Can I ask what temp gauge you used up top on the lid? Thanks for these videos!

@Smokingmeatsbbq Год назад

sure! I got this one amzn.to/3J2g8wx

@sourdoughhome2571 11 месяцев назад

IM(NS)HO, the thermometer on the lid is, as it is with every smoker and grill, useless. They are all in the wrong position. You want to the know the temperature at the grill level, not at the lid level.

@tonytighttucker Год назад

I have a question when you're cleaning your grill Is this control board waterproof or you have too very carefully with it?????

@Smokingmeatsbbq Год назад

It’s water resistant so you should be okay. Just don’t pressure wash it haha :)

@fuzzybullwinkle 2 месяца назад

With that new controller can you still run it off of a 110 house plug? And also do you lose the Bluetooth connection to the masterbuilt app

@Smokingmeatsbbq 2 месяца назад

I do not run it off 110 as that fireboard operates off its own battery and/or a USB input. However, I supposed if wanted, you could run it off 110v with a usb plug like charging a cell phone.. and Yes you lose the masterbuilt app when you change this out, however you get a FAR BETTER app within the fireboard app which you will love.

@markowen7129 Год назад

I see they use the Fireboards on the Lone Star Grillz, Pellet Smoker. Can the Fireboard Pro 2 be adapted to say a Pitboss Pellet Smoker, or do you think they have special made Fireboards for the LSG? I'm assuming they do as I've never seen the Fireboards mention anything about having a glow igniter and auger plug also.

@Smokingmeatsbbq Год назад

You know, that’s a great question. Technically all it’s doing is running a fan, so it should realistically be able to do it but the ignition part is the hard part. I’m not familiar with the level of customization you can do on the Fireboard but I don’t think they are special units, just special firmware. I’d love to have an LSG!

@markowen7129 Год назад

@@Smokingmeatsbbq LSG is my dream cooker. Lol. Thanks for the reply!!

@Smokingmeatsbbq Год назад

@@markowen7129 one day!

@samseaborn6410 10 месяцев назад

That looks like a permanent setup. Can you just leave everything attached through the winter? I live in Wisconsin and it gets pretty cold and snowy here. Also, is there some way you can run the Fireboard with an AC connection rather than a battery bank? I've got my FB on order, but haven't seen it yet.

@Smokingmeatsbbq 10 месяцев назад

You can unplug it but with a cover I leave mine out all winter

@jeremythompson4741 6 месяцев назад

Nice video. Are you able to get the meat probes through the hole in the side of the body ok?

@Smokingmeatsbbq 6 месяцев назад

Oh yes these are easy to run through there.

@jeremythompson4741 6 месяцев назад

Thanks. I'm planning on getting one soon. @@Smokingmeatsbbq

@Smokingmeatsbbq 6 месяцев назад

@@jeremythompson4741 you’ll love it

@delegation_rcs7817 Год назад

What did you do with the stock control panel mine went out and I need a replacement.

@Smokingmeatsbbq Год назад

I no longer have mine sorry!

@spike200080 6 месяцев назад

Why didn't you run channel 3 as ambient? Wouldn't you want the closest socket close to the grill?

@Smokingmeatsbbq 6 месяцев назад

I suppose I could have. Doesn’t matter which you choose ultimately.

@mrhappy9911 Год назад

Awesome video! Do you have one on installing the fireboard drive fan?

@Smokingmeatsbbq Год назад

I do not as I used the stock MB fan on this unit.

@DavidTaylor-i8i Месяц назад

Did you end up leaving your ambient temperature probe in the original spot or did you end up moving it somewhere else

@Smokingmeatsbbq Месяц назад

To this day it is still there. Works perfectly fine.

@djweaver30125 10 месяцев назад

What thermocouple temp probes are you running for your meat?

@Smokingmeatsbbq 10 месяцев назад

The k type that comes with the unit.

@tank5944 8 месяцев назад

Where did you get that ambient probe with the alligator clip

@Smokingmeatsbbq 8 месяцев назад

I’m pretty sure it came in the package

@theformulafitness Год назад

Just fyi all you had to do was remove the rubber to fit that temp prob yellow end through

@sourdoughhome2571 10 месяцев назад

Did I blink and miss it? How are you getting 12v from the battery pack to the FireBoard? Most usb battery packs only put out 5v. Thanks!

@StevesRC 10 месяцев назад

I bought an anker battery pack and using the usb C option it will give you 12v ;)

@sourdoughhome2571 10 месяцев назад

@@StevesRC Thanks again!

@BeardedGuitar Год назад

What is on your handle?? I've seen that on a few other grills...thanks!!

@Smokingmeatsbbq Год назад

That’s a Weber grill light! It’s a tight fit but it does work. Just have to watch it from hitting your shelf. Got mine on Amazon here: amzn.to/3J6uuMj

@BeardedGuitar Год назад

@@Smokingmeatsbbq Awesome thank you!!

@ryana.pearson6941 Год назад

I set up everything as instructed... connected the Masterbuilt Custom cable... but my fan is spinning slowly and the temperature isn't increasing. Did I do something wrong?

@StevesRC Год назад

Hmm not sure what are your settings? Fan speed max setting? PID setting?

@Smokingmeatsbbq Год назад

Did you figure it out? Happy to help if needed via phone. At least I could try hah

@SuperCymru 9 месяцев назад

Nice project ... but the faceplate adapter in 46 GBP .... that is a lot of money for a plastic box. Anybody found an alternative?

@Smokingmeatsbbq 9 месяцев назад

You can certainly run this unit without mounting it permanently. A lot of folks just leave it on top of the side table and run the wires to it. Messy but it works. Or build a wooden faceplate with a steel plate and get the magnet mount :)

@imranibnismail 4 месяца назад

how low can you run with the new controller, is it suitable to smoke fish?

@StevesRC 4 месяца назад

How low do you need? I've done as low as 100...

@user-cq5bz2it5x Год назад

Do the switches still work as with the MB poo controller?

@Smokingmeatsbbq Год назад

With this setup, no

@user-iv3wn1es8q 8 месяцев назад

Curious if you still love your FireBoard pro or do you wish you would’ve gotten the FireBoard Drive 2 with 6 ports and ability to use RTD probes which can withstand 700°

@Smokingmeatsbbq 8 месяцев назад

I just got done cooking some skirt steaks at 700 degrees and I can say that I’m happy with the pro! Wouldn’t change a thing.

@Smokingmeatsbbq 8 месяцев назад

And to be clear this is the Fireboard 2 Pro with the type k thermocouple type k probs rated up to 1400 degrees. whereas the drive only has thermistor probes which is only rated to the mid 500s

@user-iv3wn1es8q 8 месяцев назад

Yes, I am aware of the differences between the pro and drive2 as I have been researching, as I am going to purchase one of these models. I am told you can get RTD probes for the drive.2 that can withstand 700°. But I still think I prefer the more durable K couplers (pro model) even though I can only have three channels, which to me seems adequate. Is there any time you wish you would have six ports to use?😊

@Smokingmeatsbbq 8 месяцев назад

@@user-iv3wn1es8q ah I see. Well, currently I’ve not had a need but I do have a separate inkbird with 4 extra ports if I’m trying to track anything that closely. I stick to my thermopen for checking and use the probes for my main cook which usually only calls for one probe.

@user-iv3wn1es8q 8 месяцев назад

You say you have a thermapan, which is an amazing instant read thermometer, but have you seen or used the spark from FireBoard? It seems like an amazing instant read that can do so much more. Just wondering your input on the spark, if any, as you seem to be technically savvy.

@Jleonpolanco 5 месяцев назад

Hey buddy, question for you if you're still running this set up. Did you notice that for the same set temperature, the fireboard 2 runs the grill much hotter than the masterbuilt controller? I placed my ambient sensor in the same place and my grill is running much hotter than what the ambient says. It does make sense as i would assume theres a temperature gradient (right side hottest), but the gradient is very steep compared to the masterbuilt. I did ribs today and while holding 225 degrees at the ambient prove, my meater probe inside the ribs was measuring 315 degrees and the ribs surely cooked much quicker. With the masterbuilt, while holding 225 at the controller, my meater would usually read around 195 - 200. Did you notice the same? Did you do anything different to mitigate? Thanks!

@Smokingmeatsbbq 5 месяцев назад

I’ve not noticed that to be honest. I am still running this setup. I’ll have to play around next time I fire it up and see if I can just run ambient probes on the bottom grill to see what I’m getting.

@Jleonpolanco 5 месяцев назад

@@Smokingmeatsbbq Hey Thanks for responding! Update for me I ran a test with probes in the middle and right side along with the ambient sensor where you have it. Had differences of ~100 degrees. I figured maybe that metal plate covering the ambient sensor was the culprit so I just bent the sensor down so it was exposed more and now I'm within expected ~20ish degree difference. The Meater+ app is also showing the same expected difference.

@Smokingmeatsbbq 5 месяцев назад

very interesting. I need to try that. You bring up a good point!@@Jleonpolanco

@TheViewer315 Год назад

I just bought that last mount on etsy. To the 7 people that had it in their cart at the time of my purchase... 🖕😄

@Smokingmeatsbbq Год назад

Haha nice!!!

@tank5944 8 месяцев назад

Any reason that you chose the pro over the drive model?

@Smokingmeatsbbq 8 месяцев назад

Primarily the k type probe and the fact that they can handle higher temps since the MBG can hit 700 plus temps. Which would kill the standard probes.

@mikeatlincoln Год назад

Do you see any issues with leaving this unit out in the sun? My Pit Boss controller suffered from the UV after a few years.

@Smokingmeatsbbq Год назад

I keep mine covered. It’s “weather proof” but I wouldn’t leave it out without a cover personally.

@mikeatlincoln Год назад

@@Smokingmeatsbbq I have a cover for my MB1050 so I'll get in the habit of covering it when not in use. Great video by the way!

@Smokingmeatsbbq Год назад

@@mikeatlincoln thanks!

@BryanJones-1967 4 месяца назад

@@Smokingmeatsbbq I would assume that 3d printed housing would need to stay out of the sun. If it's PLA, it won't survive a Texas summer. I'll have to look for other options before trying this

@HeyMichaelLeo Год назад

MB 800 for under $200? Holy shit. Well...I clearly paid full price then, but I love it. Still have my Vision Pro grill, which I use for most simple grilling. Nothing like a well conditioned, ceramic, sealed grill. I needed a Rotisserie and a smoker.

@Smokingmeatsbbq Год назад

Haha yea it was an absolute steal of a deal!!

@HeyMichaelLeo Год назад

@@Smokingmeatsbbq well...when all you can eat is Wagyu and Haritage Berkshire Pork. The expense of the grill is not really a big deal. Right?

@Smokingmeatsbbq Год назад

@@HeyMichaelLeo hah!! Living large!

@HeyMichaelLeo Год назад

@@Smokingmeatsbbq This is true, but how do you go back to less, once you've had such amazing Beef. I will give you a heads up, my favorite place to shop for such and best value, is Jimmy P's, try them you will not regret.

@Smokingmeatsbbq Год назад

@@HeyMichaelLeo I’ll have to check them out!

@joshuagoshman2684 Год назад

Will the Fireboard pro still hit the 700 degrees that the stock controller did?

@Smokingmeatsbbq Год назад

Yes it can absolutely. However, I do find it takes a little longer based on the heating algorithm. I’ve gotten mine up just as high but had to use manual fan settings rather than telling it to hit a temp.

@Smokingmeatsbbq Год назад

Personally I went the FB route since I rarely use m MB for higher than smoking temps and it’s perfect for me. Use my griddles for searing and bbq type stuff.

@tonytighttucker 3 дня назад

Where did you get that grill light on the handle???

@StevesRC 3 дня назад

That’s a Weber grill light. It’s super tight on fit but it does work!

@tonytighttucker 3 дня назад

Will this fit on the 1050

@StevesRC 3 дня назад

@@tonytighttucker yea I think the handles are the same size so no problem.

@sourdoughhome2571 11 месяцев назад

You bypassed the switches. Is there a way to use the Fireboard and use the switches?

@Smokingmeatsbbq 11 месяцев назад

Not that I’ve seen yet

@sourdoughhome2571 10 месяцев назад

@@Smokingmeatsbbq I've (finally) finished the install and have two cooks on the FireBoard 2 Pro. I should have migrated to it before my MB controller flaked out. The folks at The BBQHq provide a free adapter cable when you buy the FireBoard 2 Pro from them. The cable does engage the switches. So far, my switches have worked well.

@Smokingmeatsbbq 10 месяцев назад

@@sourdoughhome2571 You are totally correct! Since I had bypassed, I was not trying to get those to work. I hate the switches and feel like they just cause issues. Glad you. got it working and thanks for posting here for others!

@tylerarndt8218 Год назад

You got you 800 series for how much!?!?!? Such a good find.

@Smokingmeatsbbq Год назад

Haha yea a steal!

@seancrable7464 Год назад

Got mine as a floor model for 79.99

@sfiv1987 Год назад

So you disconnected all the door switches and just left the fan plugged in?

@Smokingmeatsbbq Год назад

Yes basically

@sfiv1987 Год назад

@@Smokingmeatsbbq I saw a video from the bbqhd and I believe he said the fan won't work with his adapter cable if you bypass the door switches? I'm lost. Please advise

@Smokingmeatsbbq Год назад

I have it working flawlessly. Just have to be careful when you open the ash or chiminey doors :) They aren’t disconnected they are bypassed or “closed” circuit so effector the system doesn’t know there’s any switches.

@sfiv1987 Год назад

@Smokingmeatsbbq so you disconnected the door lid switch and the hopper doors switches you bypass it. Is this correct?

@Smokingmeatsbbq Год назад

@@sfiv1987 yes, looking back at the video I realized I did indeed connect the lid switch but have since bypassed it by closing the circuit. I show that in another video I have on the channel.

@bottomtiercollector Месяц назад

Does this install on a 560 as well?

@Smokingmeatsbbq Месяц назад

I would assume so but I’m unable to confirm since I don’t own one. Same technology. Just a matter of how you install it.

@bottomtiercollector Месяц назад

@@Smokingmeatsbbq I figure fit up is potentially the only difference. Do you have any videos on how you made that thing solar powered? I just love all this electronic modding you've done.

@Smokingmeatsbbq Месяц назад

⁠yes check out my video titled “must have gravity series add ons.” I talk about it there and have the links needed. It’s just a simple cable and a battery pack.

@CesarMartinez-tp4bx Год назад

Why not the 560?

@Smokingmeatsbbq Год назад

I think it could work but rather than just tossing it out there without checking I decided to leave it out of the title

@GlennEmery07 Год назад

Pic of that Walmart Receipt for the Masterbuilt or it didn't happen! 🤣😛🤣

@Smokingmeatsbbq Год назад

Lol! I promise!! They seriously rang up a Kit Kat and changed the name and price. Not kidding!!

@KristianH1986 Год назад

$170 makes me feel sick. These are £1000 in the UK 😢

@Smokingmeatsbbq Год назад

Dang! Yea, I certainly got a great deal! Sorry about the pricing across the pond!

@Jleonpolanco 6 месяцев назад

Masterbuilt for $170?!? Had to have bought it from a shop that stole it 😂

@Smokingmeatsbbq 6 месяцев назад

Nah it was a Walmart. Just workers who didn’t know any better :)

@Hunterlewis675 3 месяца назад

too much work

@russellernst1705 Год назад

That your opinion. Who cares

@Smokingmeatsbbq Год назад

😂

@HomeTech_Pro Месяц назад

I don't need this toy , I want this toy ....... the Controller that Masterbuilt gives with the grill is in a word a PIECE of sheet !!!! They literally went with the lowest bidder when deciding which chinese company to buy the controller from !

@Smokingmeatsbbq Месяц назад

Time to upgrade! To this day, I still love this setup more than anything I own!