First Bosch IDS 2.0 Sale!! Swapping Out Old R22 Carrier for a High Effeciency Bosch Heat Pump!!

Подписаться 8 тыс.

Просмотров 7 тыс.

50% 1

Thanks for watching! I hope you enjoyed. Please leave any thoughts, feedback, comments, criticism, or advice in the comment section. Thumbs up, and subscribe to see more content!
Knipex V02"Cobra" Pliers Set (3 Piece)
www.amazon.com...
Klein Tools Insulated Screwdriver, 8-in-1
www.amazon.com...
Klein Tools CL800 Digital Clamp Meter www.amazon.com...
Klein Tools 27-in-1 Tool with Torx
www.amazon.com...
Crescent 8" Adjustable Wrench
www.amazon.com...
Milwaukee Long Nose Pliers
www.amazon.com...
Milwaukee Wire Stripping and Reaming Pliers, www.amazon.com...
Bondhus Allen Wrench Set
www.amazon.com...
Klein Tools 8-Inch Torpedo Level
www.amazon.com...
MILWAUKEE Snips Serrated
www.amazon.com...
Yellow Jacket Service Wratchet Wrench
www.amazon.com...
Klein Tools 65064 Hex Head 2-in-1 Nut Driver, 1/4-Inch and 5/16-Inch
www.amazon.com...
UEi DTH35 Digital HVAC Psychrometer
www.amazon.com...
LESOVI Fishing Lure Boxe
www.amazon.com...
Li'l Popper G33-039
www.amazon.com...
Keychain Tape Meas
www.amazon.com...
LENOX Tubing Cutter
www.amazon.com...
Klein Tools HVAC 3-in-1 Pocket Screwdriver
www.amazon.com...
Bosch 20 Piece Impact Tough Drill Driver Set
www.amazon.com...
Venmo:
venmo.com/DCHVAC
Follow me on Instagram:
@dc.hvacr. www.instagram....
Follow me on TikTok:
www.tiktok.com...
Need to get in touch? Email me at dchvac123@gmail.com

Опубликовано:

3 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 54

@tomshelnutt2256 7 месяцев назад

Tapered drill or unibit will debur copper tubing really fast. You do have to watch what orientation the pipe is in so any chips don’t get way inside pipe Usually some taps on bottom of the pipe will make the chips come out though the bit will throw most of them outside the pipe

@timrob0420 Год назад

The best AC is Mitsubishi

@jackl9922 2 года назад

I like your straight to the point videos without drama some do. Thx.

@brucegiannetti53 2 года назад

I think it is great to see brothers working together.

@erixgar4117 8 месяцев назад

Have you done an electric heat element install for BOSCH heat pump?

@DCHVAC 8 месяцев назад

No we don’t use those here, we need heat 5 months out of the year, they use gas or oil for it.

@eddiew.6485 2 года назад

Getting into the Sales end of the Trade….Nice! 😎. Knowledge is Power….

@chuckquinn8026 2 года назад

Proud of your work DanielSon!

@thefathvacguy6341 2 года назад

Beautiful install!!!

@DCHVAC 2 года назад

Thank you!

@eddiew.6485 2 года назад

Your attention to detail is impeccable, and noticed…….Must have German 🇩🇪roots.

@DCHVAC 2 года назад

I do have German roots. 95% or so

@eddiew.6485 2 года назад

@@DCHVAC Like I said, it shows……

@veronicacampbell9197 2 года назад

Nice video. I enjoy watching the brothers working together!

@DuctlessExpert 2 года назад

You do great work Wish we could find people with your work ethic

@Wintersky136 2 года назад

9:05 may I give you the hit of watching “HVACR Videos” - Chris does a hell of a job brazing!

@DCHVAC 2 года назад

I avoid brazing, high temp bad for txv.

@danielzertuche9893 Год назад

Daniel Son , I hope.., Mike pipe, gave you a good cut on that Bosch system GOOD job. 👍 Hey Mike !

@davidlampe4153 2 года назад

Good job thanks for explaining your process.

@melingalls2527 Год назад

Good looking install. I love the Bosch systems. I add a surge protector to every inverter condenser though. It will not only save the customer some headaches but you as well.

@VooDooV6 4 месяца назад

What brand surge

@brianheimbach7422 Год назад

Great job Daniel

@paulconnolly2969 Год назад

In Massachusetts we have to be 18” off the ground with heat pumps. I can no longer use those pads. Haven’t found a perfect solution yet. Quick sling mini split stand 500 lb one with pad underneath metal quick sling.

@Jdrichardson35christ 2 года назад

Leaving 410a in your hoses will make them wear out much quicker. Not a huge deal but those rings aren't cheap

@Wintersky136 2 года назад

9:16 and yeah… brazing first, electrical second

@richardhall7983 2 года назад

Need to wrap the valves

@DCHVAC 2 года назад

Not with solder very low temp and heat dissipates fast. Also schraders are removed

@georgesummerlin1602 2 года назад

Weigh in your line length charge before you even crack the valves. Easy way in doing it.

@DCHVAC 2 года назад

I dont like to risk getting any atmosphere at all Into the lines so I'd rather add it after the negative pressures been broken

@DuctlessExpert 2 года назад

It looks great What are you guys using for the thermostats

@DCHVAC 2 года назад

White rogers

@williammoberly848 Год назад

Very nice install , how spendy was that job ?

@DCHVAC Год назад

Not cheap. All those fittings are Viega.

@jakestoe Год назад

@@DCHVAC ballpark cost?

@DCHVAC Год назад

@@jakestoe not discussed on channel. Differs from state to state.

@dukeraul624 2 года назад

Why not add the extra refrigerant before you let the gas in the unit go while still under vacuum?

@DCHVAC 2 года назад

Because doing it that way let’s more atmosphere into the system no matter how well you try to do it

@dukeraul624 2 года назад

@@DCHVAC good to know

@DuctlessExpert 2 года назад

Why don’t you use nitrogen when using the torch

@DCHVAC 2 года назад

Don’t need to use nitrogen with stay brite 8 solder it’s low temperature

@DuctlessExpert 2 года назад

@@DCHVAC You do great work Just my thoughts Take a section a use 8 with out it and look inside and let me know what you think Just wondering What is the going hourly pay rate up in your area for a tech start at

@shaunowens2710 Год назад

Any idea's how reliable these will be over the course of the life span (15-20 years), if they break after the warranty period how costly are parts and labor compared to other brand names like a Carrier.

@DCHVAC Год назад

Can’t know till the times past.

@Thomas-se3tb Год назад

Hey man any thoughts on putting a lineset silencer on the indoor unit? Been having a lot of problems with vibrations in the house on the air handler

@DCHVAC Год назад

Never had any issues

@davidvaught586 2 года назад

Soft soldering!?!?

@DCHVAC 2 года назад

Staybrite #8 by Harris. Used for residential hvac tubing connections. Can withstand higher pressures than brazing, a much more flexible joint, and does not cause any carbonization on the pipe that can damage the TXV or oil in the refrigerant. And the low temperature doesn’t stress the copper as much.

@mrpatter19888 2 года назад

@@DCHVAC catching your videos and Mikes, sold my first Bosch 2.0. Most intriguing thing to me is the stay bright 8. I know you guys get a lot of hate for it, but it’s literally what the manufacturers use in a lot of units (I think lol) I may have to look into it. If we could press fitting onto our units I’d consider investing in press tool, but most jobs I don’t have enough joints to make it worth it, plus my torch already has to be out.

@marcspencer9077 2 года назад

I was told these Bosch systems are made in China.

@DCHVAC 2 года назад

European engineering… made in chine makes parts affordable

@marcspencer9077 2 года назад

@@DCHVAC Got some info on Ducayn Lynx, which Is supposed to be made in the US they claim to be identical to Bosch. Allied sells them.

@DuctlessExpert 2 года назад

@@DCHVAC To bad we don’t have American made products like the Bosch product s Maybe with this new bill the us will support more manufactures so we can make it here at a rate that can compete in the market

@rosewoodsteel6656 Год назад

@@DCHVAC So, are the systems 1/3 the cost of a comparable Trane or Carrier system? I'm sure the manufacturing savings are being passed on to the consumer.. My guess is parts availability will be an issue and the cost of the huge motherboard on the condenser will be astronomical. -Don't know about most people, but I want a unit that a typical service tech can repair with the parts he is carrying on his truck.