FIRST FIRE Dodge Magnum 3.5l v6 STROKER, BIG CAMS, PORTED HEADS/Intake. Baby Hauler EP.8 

Sounds like a turn of the century hit and miss engine at the beginning very cool respect for doing a v6

Straight up sounds like the 5.7 for sure without the cams, you couldn’t tell if this was 6 or v8 . I love it! Just bought a charger with a 2.7 for a project.

That V6 lope got me feeling a certain kinda way!

Man this inspired me to swap my 2.7l charger to the 3.5l an I’m going to do exactly what you did thank you for the inspiration.

Epic. I love seeing the 3.5 get love.

M90 supercharger bro. I will love to see how it's done. That will be a nice learning experience to follow your steps on that build.

I had a dodge intrepid with that motor I turboed mine. the platform under the magnum is the same as the dodge intrepid just real wheel drive

Even though the O2s have the engine running in a rough state, it actually sounds pretty damn good. Can't wait to get my 3.5 swapped dune truck running.

I just bought a magnum with a new trans and engine rebuild sxt

This is my favorite channel

is it possible to do this to my 2006 Chrysler Pacifica? it does have the 3.5 but can it work with it being transverse and all?

i am trying to stroke my 2010 charger sxt, also a 3.5. any help!??

wish you could still find those cams for the 3.5 !

Bud where are you located?! I have a 2010 Dodge Charger I'm planning on building when I get a settlement from my motorcycle accident and I want my 3.5 to sound like this!! I'm in Missouri

I considered buying 300C which is burning oil and do almost exact thing and swap NAG1 later. I'm very intrested what numbers it puts out. Keep updating us! Cheers bro

Anyone use the inertia v 1.2 cams for the 2008 charger 3.5l?

Nice Doing this to mine. Idk how but I'll learn nice video!

After watching this , I'll stick with carburetors and vacuum gauges lot less bs and more time cruising.

Bro new subscriber to channel. I love the build to the 3.5 V6 magnum very informational💯💯💯. I have one and now it's time to work on her heart bro. Her body come together. Keep💪💪💪it

So is it just the 3.5 block that you slapped the 4.0's crank, rods, and pistons in? The mains are all still the same?

Now, to buy a charger with a 3.5 and make it sound like this!

Did you use the 4.0 short block? That would be so much easier than grinding main bearing caps. My 3.5 is getting tired and I would like to do something like this. The engine has been great to me

How do I do this to my v-6 Challenger? Sounds Amazing

The Dodge Nitro has 4.0 V6 block is the same as the 3.5 I would swap it with my 3.5 charger

Racing Ram Fam Sounds like your stuck in open loop!. Ect must be checked and AF ratio. One bank isn't open looping with the other. Check map pressure or gasket leaks

What type cams did you use? Or where did you get them. Plus will they fit in the 3.5 heads instead of the 4.0

Dropped a 4.0 from a Pacifica into my 2010 Charger this month, nothing else, gained 4MPG..

I have a 3.5 I need to do this

We're did you get your custom cams done looking for my 3.7l v6 dodge Dakota

I’m have the same motor but I can’t find any kind of after market support what’s some good websites

4.0+8spd is my plan

1935 John deer Johnny popper sound

Nice! I have the 07 sxt 3.5 same headers high flow cats with duals h pipe and dual chamber super 10 Flowmaster single nozzle dry 100 hp shot nitrous and single turbo running around 4 lbs right now because I'm waiting to get my custom tune for my trinity t2 . haven't done anything internal but do want to do cam. Could you please tell me where you picked yours up at or if possible send me a link. You got an awesome build going bro you 've surely peeked my interest. I'll be following! Thanks in advance for any info you might be able to provide.

on the 3.5 intake where the power brake booster vacuum line plugs in, there is a smaller vacuum port. My vacuum line is broken off there and I don't know where it goes to. Do you know?

I just ordered cams from inertia Motorsport for my 3.5l challenger. Anything you would recommend I change while I’m swapping out the cams? Rocker arms or anything. I’m also replacing head gaskets, head bolts, cam seals. Any advice would be appreciated. Thanks.

Dope build!! What kind of shorty headers did u put on it? Ones that were designed for the 3.5l v6 magnum?

When you putting her on the Dyno?

Where you gone get the turbo/supercharger from? I got the same mods except for crank

Why does thus v6 sounds so good

What are the specs for the cams and where did you get them from?

Have you considered an olds/pontiac 3800 supercharger for it ?

What year was the dodge nitro you took out the parts from?

Please supercharge this car. Will build along with you

We’re did you send your cams? I’m a 3.5 junky. And have a couple complete motors. And a couple half motors. And now this week a 4.0 complete block! Thanks btw. But I already have these cams boxed please a number a address or a spec sheet something.

Have you worked out any of the kinks with the stroker motor? I think the stroker is pretty freaking awesome.

where may one find online and purchase stroker kit for Pentastar V6 engines??

muy interesante tengo un 300m especial estoy ajustando motor, en que medida quedaron los pistones? que biela utilizo para stroker? saludos. Francisco

it's been over a year do you have any updates on this bill? How are things going with the motor? Heckerino, How's the new addition to the Family! Also, did you ever find out WHY it was running rich?

What pistons you got?? I have a nitro rt 4.0 and the duration was too long

Twin turbos and supercharger from Chrysler crossfire,also would parts from 3.2 srt6 fit 3.5.?

Is this the same 3.5 out of the 2010 Sebring?

What kinda numbers is she putting down? Know the times?

Engine install in sandals

I need your help on doing the same thing to mines

Twin hair dryers will put out more power😁

Would like to speak with you like that a Dodge Charger I'm looking to do the same thing to you I'd like to get some input please let me know thank you

Have an 07 Magnum V6 awd that would like to get something like this done. Do you just work on your cars? Or is it a shop?

This is so cool, do you think you will get her on a dyno?

How much can I port the intake manifold on my 3.5L Chrysler 300?

Badass

Sounds like she running on 2 cylinders

Me and my dad have actually been talking about Turing my 3.5 to a 4.0! Do you recommend short or long tube headers? And where did you get the cams I can’t find them anywhere!

Your cam overlap is screwing up your computer

That Magnum sounds like a crappy Massey Ferguson lol or an old steam engine , brutalll

Daaaaaaang!

The lifters in the heads sound bad

Headers?

Any update on this?:)

Man please tell me you gonna upload more content on the magnum please I need to see where this goes

Sounds like v8

R u gonna put a turbo on it?

Dyno numbers ?

What size piston did you put in him?

What code reader are you using?

Why didn't you just 4.0 swap it?

It kind of sounds like a rod knock not a cam loop

Wussup bro what state you in?? I got this 2006 srt10 with only 70k miles i need it tuned i need some advice on how to make my bitch mean

Just tune it buddy

Turbo it

Sounds like 💩