No video :(

First impressions of a very HYPED printer, calibration gets fun, more bendy resin!

Подписаться 50 тыс.

Просмотров 38 тыс.

50% 1

If you haven't become a member yet, what are ya waiting for?!?! Head on over to whichever platform suits you best and register for some EPIC minis, extra videos, and a bloody great Discord server.
BUYMEACOFFEE - buymeacoffee.c...
PATREON - / onceinasixside
RU-vid - / @onceinasixside
If you can't register today that's ok, you can do me another favour and check out these amazing artists who support the channel! Please check out their stores and give 'em a follow :)
Artificiers Mini - www.myminifact...
Dork Factory - dorkfactorymin...
Hivemind Minis - / hivemindminis
Imp3Dsion - imp3dsion.com/
MOID - / moid
Neoteric Miniatures - / neotericminiatures
Stone Forge - www.myminifact...
SYNRG Studio - cults3d.com/en...
I forgot to comment more on the resin - it's not bad! I'd put it on par with conjur sculpt and ABS-Like 2.0 from Elegoo, but for the price they're asking I'd go with something else. Here are some recommendations I've tried and love, and please note all links past this point are affiliate links and so are a great way to help fund this channel
Anycubic Tough Resin Ultra - shrsl.com/4e82r
Sunlu Toughness Resin - bit.ly/sunluto...
As for the printers if you want to buy the GKTwo after seeing this video please use this link below so I can earn that sweet sweet dosh, but also be sure to take advantage of these discount codes too
Uniformation GKTwo: bit.ly/sixside...
$100 off Easter Discount Code: eastergk2
$80 Once in a Six Side Discount Code (Valid forever apparently): sixside
If however you're feeling like the GKTwo is a little overkill for you I highly HIGHLY recommend the Anycubic Mono M5s Pro - it's a phenomenal printer.
Anycubic Mono M5s Pro: shrsl.com/4dpud
But if you fancy something cheaper I swear by the entry level Anycubic Mono 2 as well, that thing puts out gorgeous prints and won't break the bank.
Anycubic Mono 2: shrsl.com/43t22
Uniformation please PLEASE copy this feature from Anycubic and I'll make you video raving about it:
• Your Comprehensive Gui...
Cones of Calibration v3 Beta (Tableflip Foundry Discord): / discord
GKTwo Fume Adapter: makerworld.com...
Fume Extractor System: • Fumes be GONE! Versati...
Rising Ape: / @risingape
Adhesion Raft: makerworld.com...

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 278

@DHYohko 5 месяцев назад

this is the best type of video for 3d priting, raw real life experience getting a printer runing.

@86abaile 5 месяцев назад

No, the sticker was the right way up, you just put the lid back on upside down when you reassembled the part you weren't supposed to take apart.

@ChirpOTK 5 месяцев назад

This is very funny lmao

@Jigsaw765 5 месяцев назад

Amazing. This is the kind of content he wants us to sub to his patreon for

@DrewLSsix 5 месяцев назад

@Jigsaw765 yeah, go to those other 3d printer creators who notoriously never make mistakes...... oh wait.

@matthewhaworth5935 5 месяцев назад

My GK two was my first resin printer. I got the full kit with the ultrasonic & curing station. I absolutely love it. The only thing I've ran into in the past 2 months... I just wish I had about 2" more on the build plate! Lol. Same goes for the ultrasonic & cure machine. I just wish they were a bit bigger. Also, just to share mt experience for anyone that reads this - like I mentioned, this was my first printer. I had watched a ton of videos beforehand so that definitely played a part but I was unboxed and printing within 15m. I had my first real print completely successful with all defaults using phrozen resin within an hour. Simple at every step is a valid slogan.

@Old_Wizard_Minis 5 месяцев назад

You do a pretty solid job reviewing all these machines. Keep it up.

@markburgess4528 5 месяцев назад

Great video. As another poster said, you were the only one who wasn't sucking it off all the way. I do have to say I was shouting at you to clean the screen of drips while cleaning the vat. 🤣

@bogatyr2473 5 месяцев назад

This is exactly what I want in a printer review.

@Nobody-pb5mm 5 месяцев назад

1 huge plus for the GKTwo is the heating in very cold regions. I spend about half the year at or under freezing and the anycubic heater just cant handle it. I think the difference is it is heating the enclosure and the top layer were the GKTwo is heating the bottom layer of the vat and that seems to be the important part. I have only had the GKTwo for about a month now but it seem significantly more consistent in very cold temps. That difference was well worth the extra money for me. Very good comprehensive review.

@petercallison5765 4 месяца назад

Try putting in two heaters.

@richardhaser7067 5 месяцев назад

I really enjoy the content. It is just real. If that makes sense. One of my new favorite channels. Your video on supporting resin prints was amazing and I refer back to it often. The cussing is just genuine human response and I appreciate not editing the shit out of the audio.

@ChirpOTK 5 месяцев назад

There is a max fill line in the vat. The resin rises over the outer shelf of the vat and the line is right where is says 700g

@Fell-Handed_Bjorn 5 месяцев назад

I think the sticker on the carbon filter got flipped when ya took it apart

@theo._.5593 4 месяца назад

yep

@KD0AFK33 3 месяца назад

no, for some stupid reason, they printed the arrow correctly but they printed the text upside down.

@geekandnerdtech 3 месяца назад

@@KD0AFK33 He pulled the cover off the back of the filter, out it back on upside down, The sell full replacements not just inserts.

@NoMercyFtw 5 месяцев назад

This is the only Gktwo video ive seen that wasnt sucking it off the entire video............... Great video, for the price that machine shouldnt be missing any features

@randomtvninja 5 месяцев назад

The Facebook group is insane, the printer can never be bad it's the best thing ever if it ever does anything wrong it's on you. So annoying. Also having WiFi on this when you have to use it like a NAS is stupid. Time to watch the whole video and see what he says though.

@NoMercyFtw 5 месяцев назад

@@randomtvninja I hate products like that

@RenMomoDotPog 5 месяцев назад

yeah same, I have only seen "WOW AMAZING" and I was waiting for mr side to review it

@4of122 2 месяца назад

this was the reason I just bought the Saturn 3 Ultra, no machine at that price point is without issues

@RisingApe 5 месяцев назад

Cheers for the shout out, great review, really fair I’m a big fan of the GK2 but no doubt that it’s got a chunky price point! So that value question is a good one.

@Mr424242424242424242 4 месяца назад

From what I can tell, they're throwing the wifi adapters into boxes post packaging of most of the printers, as a change during production they wanted to push out to as many customers as possible. So some of them get more than one, because probably they don't track which ones got an adapter as closely as one might like. For example, I reached out to their support when I broke a set of tank clips(those spare clips in the box), and my unit had been packed prior to them including them in the printer box, so at no cost to me, support sent me a new set of tank clips, not only to replace the ones I'd broken, but also to ensure I had the normal stock of extra tank clips that their newer units would have.

@msp5616 5 месяцев назад

I have observed several reviews of this printer, and this particular review stands out as the most informative and comprehensive. It was beneficial (perhaps not for you) to observe the challenges you encountered with the vat, as it provides a realistic perspective on the printing process. I genuinely appreciate your candid and thorough reviews. As a new subscriber to your channel, I encourage you to continue providing honest and valuable insights. In reference to the M5s Pro, I encountered a printing issue where a print detached from the supports during the printing process. The printer promptly notified me of a "zero release error." This incident demonstrates the effectiveness of the printer's intelligent feature in detecting and communicating printing errors.

@xEternalEnigmax 4 месяца назад

Probably the best review of a printer, mistakes and all. It gives a real look at what it looks like operatating the printer. Need more of this.

@bahamut256 4 дня назад

Leaves the resin filled build plate hanging above the screen, dripping resin onto the LCD for 15 minutes straight. Runs a paper towel over the FEP, immediately destroying it. Thank god the block this channel function exists.

@Dark0Storm 5 месяцев назад

pretty sure when they said that "this is just a backup" they meant the levelling kit was a backup in case the pre-levelling was off, not that the pre-levelling was just a backup. I do think it's worth trying a printer that is pre-levelled as it comes out of the box first, rather than levelling first, to test how good their pre-levelling is. Especially as I've seen other reviews where they found the pre-levelling was fine. A printer that generally doesn't need levelling out of the box is something that would benefit people (if done right), so def a claim that should be tested imo.

@colegreenwald9403 5 месяцев назад

Six you rock dude! Definitely keep up the first impression reviews! I’m new to 3D printing for minis and your channel has been by far the best I have found. For someone who likes watching videos while doing other things your rambling and depth of knowledge is exactly what I love! Again keep doing what you’re doing brother! A sub to patreon coming soon!

@jasonlee9422 5 месяцев назад

I like these long form videos, very informative and clear criticism and praise bundled with just good knowledge, handy tips ect

@markrond2395 5 месяцев назад

I think you need to take the build plate off before you take out the vat. it was torture to watch you clean the vat out while you can see the resin dripping straight on the screen. also, when you need to clean a vat out like that, using a teaspoon of metho makes the resin easier to wipe up

@vermin9190 4 месяца назад

whats the teaspoon method

@markrond2395 4 месяца назад

@@vermin9190 just put a bit of alcohol in the vat to break up the resin and wipe it up with a paper towel faster

@nopenope5598 4 месяца назад

Love this type of video where you review a printer and bang out a few of the minis from the month.

@mackbolan1733 Месяц назад

Dude, if you don't have any old supports to place down in the vat for the tank cleaning...get a sheet of A4 printer paper, or even just card board (and in teh case of the paper fold it several times so it has some thickness to it), then bend it into an 'L' shape, and place one part of the L down on the FEP and hold it there while the tank clean exposes...works perfectly fine...much better than doing what you were trying to do...

@OnceinaSixSide Месяц назад

You're a fucking genius. I just tried this and it worked exactly like you said it would :D Keep an eye out for my S4U video haha

@mackbolan1733 Месяц назад

@@OnceinaSixSide No worries...you can also use one of those gloves you are wearing...just bunch it up and push in down gently in the corner of the vat to touch the FEP while the tank clean cures the layer, then gently pull the glove up...

@Neknoh 4 месяца назад

The max fill-line for the GK-two vat is the small slot in the top left, once that one is filled, you've hit "max"

@FrazzledDadsMinis 5 месяцев назад

This is a terrific video. I enjoy the long format of you talking off-the-cuff while you're working through exploring something. Also, ignore the nit-picky commenters.

@StarsServent 5 месяцев назад

After seeing you having trubble leveling the plate on the Nova, and then a lttle on this, I'm so glad my mars 3 pro just printed, even though I did not know about the spring in the buld plate till I saw you video on it after havening the machine for 6 months. with just made the printing better.

@dieterkohler2206 4 месяца назад

Very entertaining video. I really liked how you, right out of the gate, tried to destroy every single piece of the machine :-) On a more serious note, I don't like that you got results essentially only by sanding the build plate. Also that vat design gives me second thoughts, as it seems to have several serious flaws (also mentoned in the comments below).

@PatrickM66B 4 месяца назад

This format is AMAZING!!! Keep it up! if feels like you are here teaching me and hanging out. Feels very genuine.

@RoofusKit 4 месяца назад

You can see on the carbon filter holder that it has two vents, one that pulls in from the printer and one that exhausts back into the printer. Which is ideal. You can't judge a resin from the vat cleaning function because it tends to over-expose on purpose to make sure it's got a thick layer to peel up.

@petercallison5765 4 месяца назад

With Anycubic and as far as I know most printers, you don't need to use a vat clean option. You just go into exposure test and tell it how many seconds you want.

@FlesHBoX 5 месяцев назад

Another thing that makes me wonder about that vat design is that whenever you remove the vat you are dragging your release film across the screen, potentially introducing scratches, especially if any dust gets under there. As someone who takes great care in never touching the release film with anything that might scratch it, that would be a concern for me.

@theo._.5593 3 месяца назад

you have a gap between the fep and screen, no more worries to have than a regular vat on that side

@cgooch_ 2 месяца назад

If there is debris there, there will be scratches. The leveling paper also scratches the screen protector.

@hamibstorm Месяц назад

Screen protector big guy, LCD is replaced with 4 screws and easy clip ribbon. Best printer for the price

@FlesHBoX Месяц назад

@@hamibstorm release film my guy...we're talking about scratching your release film, which will degrade print quality. Pay attention.

@JimmyJams_2113 5 месяцев назад

Ive been shopping for a new resin 3d printer Im so thankful you call out things you dont like. Its been making me feel better about geting a printer witha large price point

@ashleywhitehead3710 5 месяцев назад

Watching you clean the vat was a horror show lol. Its my least favourite thing to have to do as well but jeez, you made it more of a task than it should be. You pulled the vat first letting the build plate drip resin all over the screen. Then you squeeged the fep and vat with the plastic scraper and mopped up with paper towel. Yikes! 101 on how to wreck your fep right there. Ideal method allows you to minimise contact with the fep as much as possible. To easily remove the sheet of resin after a vat clean without touching the fep, place a raft with supports from a previous print in the corner of the vat then run the vat clean. To remove the resin sheet pull on the supports sticking out of the resin to lift the corner and peel the sheet out of the vat. To clean the residual resin out of the vat use a silicon spatula (Woolies, Coles, 2 dollar shop) instead of the plastic scraper as it won't scratch the fep. Then to remove the remaining resin from the vat use a silicon basting brush with alcohol in the vat to work the resin into solution with the a alcohol. Drain, then while the vat is tilted spray alcohol, starting at the top, and push all the residual alcohol / resin down to the spout on the vat so it drains out. Vat should now be clean and you can dry with a non scratch microfiber cloth. This will cause the fep to take on a static charge and attract dust and fibres to the fep surface. Use some painters masking tape to remove any dust and fibres from the fep and LCD. Place vat back on printer and your good to go.

@KhovanovN 4 месяца назад

Thanks for making these! It' super nice to hear you pul up things that could be worked on and showing us the "average user" process, rather than a rehearsed "look how easy it is" video. Looking forward to more!

@dekyras 4 месяца назад

Informative video - thanks - good to see the negatives and positives brought out honestly and openly

@Karlosovic77 2 месяца назад

Awesome video, as always Six! Great to see the issues that you had as an experienced printer. As many others have said, this kind of real insight to the ins and outs of using printers is much more helpful to those of us starting out, in seeing what can go wrong and how to deal with it. For the record - Americans actually spell Aluminium differently to us, in line with how they pronounce it, so while it's a good shout, you're not going to gain any insight by comparing it to how they say/spell "condominium". They're a weird bunch, and as much as they try to co-opt the English language by referring to actual English as "British" in order to try and legitimise their weird version , we still love 'em and most of what they do ;)

@katywalker8322 5 месяцев назад

Think you overfilled the vat, hence the splashes. You appeared to have resin o the lip around the edge As to aluminium, the US spells it differently to match the way they say it

@bogatyr2473 5 месяцев назад

Which is a great example of why max fill lines should be considered a requirement, not a nice to have.

@Katazo98 5 месяцев назад

Because we followed Merriam Webster not the council of Scientists who kept changing it to fit Periodic table metal, naming convention. Even the Guy who discovered it wanted to call it Alumium but his council of peers kept going we need to fit the Naming Conventions. Then when he published his text book he called it Aluminum.

@theo._.5593 4 месяца назад

well there's one...@@bogatyr2473

@treyroberts8124 3 месяца назад

@bogatyr2473 the max fill is the little tray at the back left corner. He just went a little past

@richardrussell7082 5 месяцев назад

The max fill is when it flows into the little recessed shelf towards the back corner. The exposure test really should be a full screen, like the vat cleaner function. Also: put a sheet of paper over it first 😜👍 A little helper for emptying the vat: put a strip of masking / painter's tape across the corner leaving a small gap right in the corner that's big enough for a steady pour rate.

@lukewurzbacher239 5 месяцев назад

I like the longer, unscripted reviews of printers. it also helps us watch exactly how you do things like clean the tank, slice objects, ect. I'd love a video like this about different mini creators, maybe even include a section of wargaming quality painting after

@Drakanis25 4 месяца назад

The reason for the separate wifi adaptor is because the printer didn’t release with the adaptor available. It came out late 2023 and was a pre order when I got mine. They gave you an updated accessory kit but put in the pre order as well

@ZachariahLawrence 4 месяца назад

"I did just bump my camera and it gave me a warning about data loss" Lets call that foreshadowing lol. Great video, even with the technical issues.

@Vizeroy9 2 месяца назад

The thing with Chitubox is: it's only for printers with Chitu hardware inside. There are several printers with different Mainboards, than Chitu. Therefore, those can't be used with Chitubox. The printer in this video, my printers from Uniz and several others are incompatible with Chitubox. If you have a few manufacturers, Lychee is simply the easiest slicer to use - especially, if the printers have the same printbed size. Change printer, select the matching resin profile. slice again and you are good to go with just a few adjustments.

@JameTek 4 месяца назад

The only honest review of this thing. You can tell the difference between "review channels" and people just use their printers.

@phastroh Месяц назад

I was ROLLIN dude LOLOLO you made this funny at least. Loved it! The other USB falling apart LOLOLOLOLOLOLOLOL

@KimHarderFog 5 месяцев назад

Love the first impression video much more than just a review

@robertpenduck8455 День назад

I use the Anyqupic tough and flexible it's about the best resin I have used it's bout 40 pounds a bottle uk but it's bloody brilliant with large and small figures. I am using the Anyqupic mono x printer and also the Anyqupic photon SE and the detail and finish is great. I love the show and your reviews are what we need to see im looking at getting a 12k printer but since seeing your review I'm holding on to my 4k because the detail I get from 28mm to large statue sized models is amazing keep up the good fight for us printers and painters of stl files you have a great channel and the content is never boring or confusing im also a patrion member and love the variety of monthly stls you give from your channel thanks again from a very satisfied Welsh man.

@OnceinaSixSide День назад

Thanks for the support Robert! Glad to hear you're getting a lot out of the videos and membership 🤘🍻

@nathanbrehm1085 5 месяцев назад

The lid needs a safety latch or the friction hinges or something

@babbagebrassworks4278 5 месяцев назад

All printers should have that type of build plate, just with textured plate.

@xyonblade 2 месяца назад

I do like this style of video

@SomewhatBaffled 4 месяца назад

Aluminum and aluminium are technically both correct. The "discoverer" of aluminium Sir Humphry Davy seems to have changed his mind several times as to what to call it exactly. And eventually we all settled where we settled.

@pezza2000 Месяц назад

I have two GKtwos and about to buy a third for my business and they run nearly 24/7. For me they just work out the box, no failiures (using sunlu abs). I've had to relevel once or twice after a while but that was due to my error. A bit to learn for their levelling process on the first time but it's not complicated. Also being in the UK and printing in the garage means I don't have to build custom heating enclosures. 10x more enjoyable process then my old elegoo saturns.

@verigone2677 4 месяца назад

The Sticker didn't get put on upside down, you put the lid back on your filter upside down after screwing with it

@matthewhaworth5935 5 месяцев назад

The wifi dongle used to be a paid addon. As of not that long ago all new GK two's come with the wifi dongle in the box. Maybe thats why you got 2? Idk, I couldn't imagine a printer without wifi now though. I set it up as a network drive on my PC and after slicing I just drag and drop onto the internal storage of the GK two. Now I just wish I could start the print remotely too. After having my Bambu P1S I'm spoiled. Being able to find something I want to print while at work and then starting it with the app and having it be completed and sitting on my build plate when I get home is just the greatest thing ever.

@YouBetterCallSaul 5 месяцев назад

I have gotten into fdm printers and considered getting into resin printers…watching this experience has made me realize ill just wait for the tech to innovate just a bit more lol

@jamesdunn581 5 месяцев назад

Was interested in this printer until you started cleaning out the vat. That looks so complicated and difficult to do. Thanks for these vids. You've saved me from many future headaches. :D

@bora773 2 месяца назад

when doing vat clean, please use a old support on one corner, before doing the vat clean. that way you can lift it out without any hassle. also get yourself a cheap silicone brush for cleaning the vat - the scrapy thing will make scratches unfortunately :-)

@chuckrodriguezfishing2799 3 месяца назад

Highly recommend Sunlu standard plus resin. Highly detailed and durable. Using the gk2 bottom layer 5 and exposure 2.8.

@snactimusmaximus 5 месяцев назад

I'm new to printing and this video format is extremely valuable as it's informing me not only of the qualities of this printer but a lot of other things I need to consider. Idk if I'm your target audience, but there ya go.

@napalmmachete 5 месяцев назад

I agree this is a great style of video :) put it on while assembling 3d printed minis

@cyberware5323 5 месяцев назад

I like the first impression hands on approach. And your eye for details.

@franklima 2 месяца назад

Good video with useful content but I wish the editing was tighter, with some more aggressive editing you could probably get it down to 1 hour without loosing anything.

@OnceinaSixSide 2 месяца назад

Thanks for the feedback! I do try and tighten these videos up a bit but I'm also trying to keep them fast and loose so I can focus my creative energy on the videos I really care about. Printer reviews I've come to decide that for me personally aren't worth scripts and tight editing.

@jaspercallahan3318 Месяц назад

Please do not edit. I like your style videos for that exact reason. There are plenty of massivly edited youtubers out there. Keep it up! Great content

@matso3856 Месяц назад

@@jaspercallahan3318 Dude he edits everything , otherwise this would be 6+ hours long. My feedback would be to hit somwhere between 40-80 minutes tops for reviews , it would still be much more chill then all the others

@jaspercallahan3318 Месяц назад

@@matso3856 yea i totally get it i meant his style on what he chooses to keep. I guess i didnt realize how much editing is done i do see it in his videos but more so on his style and how different his videos are. As far as keeping them inbetween a time frame id say that part i agree his point but yours is just as valid. But i personally dont mind

@no925 5 месяцев назад

Nice and a lot more nuanced review than I've seen from other "testers". Thx

@RoseKindred 5 месяцев назад

You watched an hour and 40 minute video in 20 seconds? I mean, sweet.

@MAJmufin 5 месяцев назад

@@RoseKindred maybe he is a patreon member and got it earlier there?

@RoseKindred 5 месяцев назад

@@MAJmufin Good point, I'm used to seeing those as hours or days old comments when the video is just released, not "20 seconds ago" so it could just be my error. I know some people watch at 3X speeds (by other means) so was more curious if someone made a faster plug.

@Xiv2022 4 месяца назад

Great format. Great to Build, Paint or 3D Print while watching/listening

@Northern_Viking 4 месяца назад

Ignore the haters, your doing a great job showing the printer. Keep up the great work.

@TheGoatPC 4 месяца назад

This was a great video, I would love it if you did a full video just on how you've calibrated your printers.

@FishtankFriday 4 месяца назад

Love the rabbits in the video, like TheHockeyGuy with his and his cats. Great video on a printer I've been looking at for months

@christopherstephens2699 8 дней назад

You can do multi parameter slices in chitubox pro and do different exposure times for different models. Of course that does mean using pro, which hasn't been updated in a year and having to use USB sticks instead of wifi and that dinosaur UI since they don't actually care about their paying customers.

@georgeoreally5504 4 месяца назад

I feel this style of 'review' is a lot better at showing the true user experience. If I as a novice bought a new printer these are the issues I would be finding.

@walterramirez3287 12 дней назад

The price of the GK 2 is now $999. Which make the printer around $500

@weststylinmusicgrp 4 месяца назад

I had the anycubic and it sucked, had nothing but issue with it, went and bought the gk2, and had no issue from the beginning, put the build plate on it and started printing, just like my jupiter se, no issues

@Neknoh 4 месяца назад

One note on temperature: I noticed you're printing at 25, try it out at 35C, it significantly reduces print times and increases print consistency, it's just lovely

@JerryBWagoner 3 месяца назад

I stumbled across the video tonight and this happened to be a model I'm looking at so I decided to give it a go. After 20 minutes I was fully onboard with the "this guy is really whining". By the end of the video I was really appreciating the format and the play by play.

@KimHarderFog 5 месяцев назад

The Resione TH72 Long-lasting Tough Resin is a brilliant, tough, resin, that can bend and generelly not break - It's worth giving a try, I've been using it for the last year, and the only breakage I've experienced, is when a miniature fell from 1.5m height down own tiled floor, and it was just a feather on a cap that broke.

@gemlord17 5 месяцев назад

Couple of things. 1. I'm glad your critical. Small things can be very annoying over time and helps companies know upgrade options for later models 2. People who complain about these things prob bought the printer and don't want regrets so they are just babies who can't take criticism. 3. With your accent I need you to say "tight like a tiger!" When you say something is tight!! 😅

@LordOcelot 4 месяца назад

I appreciate a guy whose Wi-Fi password is fartsquatch####

@OnceinaSixSide 4 месяца назад

😂😂

@demonhogo Месяц назад

This looks good, but it's hard to ever believe that this is nearly twice as good as a Saturn 4 ultra.

@OnceinaSixSide Месяц назад

Yeah it's not, and in many ways it's built half as well.

@demonhogo Месяц назад

@@OnceinaSixSidelol I ended up getting a good deal on a gktwo and bought one 😂

@Jane-de2re 4 месяца назад

I'm guessing when you checked the activated charcoal, you put the cap upside down

@checomrie 5 месяцев назад

I enjoyed this video. I'll consider purchasing the GKTwo when buying my next resin printer.

@Deefourteen 4 месяца назад

The GKtwo is my first resin printer and I already have had it for a couple weeks now. I agree that the lid falling closed is an issue for me and I don't need the heated option at all. lol

@herculeholmes504 2 месяца назад

The lid falling closed is definitely an issue! Easily remedied with a DIY hack, but it should be better.

@freezerlettuce 5 месяцев назад

Is that version of the cones of success available to download from somewhere yet?

@CYNeo100 5 месяцев назад

Can't seem to find it anywhere

@Dark0Storm 4 месяца назад

That bit of play gives you space to fit a gasket 🙂

@DanielBranigan-cn3nz 4 месяца назад

Bro.... U way over filled the vat, that s why it was so hard to clean! Theres this little section in the corner that denotes when you have reached the limmit.

@kekker_ 5 месяцев назад

The US power plug has flat prongs that are unsleeved all the way down. Pretty different from the EU plug, and way more unsafe.

@MatchaMakesThings 3 месяца назад

Thanks for bleeping the swearing. Appreciate it.

@MatchaMakesThings 3 месяца назад

Should have a Google doc of 0-10 ratings of printers

@agzarah 5 месяцев назад

IEC cord? ive only ever known those as "kettle leads" maybe thats a british thing

@matso3856 Месяц назад

Heard "PC power" cord here in Sweden , probebly not the 'proper' wording but it stuck

@tempusavatar 5 месяцев назад

Thanks for the video. The moment at the end with the build plate adhesion/peel forces prompted a question: I have seen other people recommend using a lubricant oil on the fep sheet, do you have any experience trying that out?

@trennaman 5 месяцев назад

back for my #onlyhands fix always delivers!

@SanctifiedDevil 2 месяца назад

Probably because I'm in IT, but as soon as I seen the network address started with "\\", I instantly knew it was a file share and you should just browse to it. Fully understand how that wasn't readily obvious though.

@Strixx23 2 месяца назад

Aluminum was the original spelling, then in uk it switched to Aluminium. Same with soldering, the USA say it the original way, (sounds like ‘sardering’) then UK changed it to soldering.

@lexzbuddy 3 месяца назад

Good format for the video. I like it

@dan3dprint183 4 месяца назад

I live in hell so don't need a heater. This Printer have the same light source of the Saturn 8K and only have one linear guide rail but cost $850. if Elegoo or Anycubic used only one linear guide rail to save money the complains gonna be eternal.

@herculeholmes504 2 месяца назад

My Saturn 2 never worked properly. The GK Two was a revelation for me; it just works. It works, and it works, and it works.

@awildtomappeared5925 5 месяцев назад

I made a saturn 1 lid mod using a monitor hinge to get a hinge with resistiance so you can lift it up and it will stay up from the friction and it will fall down but not hard. I also made a super simple and effective pla hinge that does the same thing, it's literally just a bolt washers and two pla parts, idk why they don't use hinges with friction.

@SetaDragon 5 месяцев назад

I like these so I can figure out which gripes I am willing to live with. That vat with all those cleaning spots is a big no.

@RobertSingers 5 месяцев назад

One small nitpick, you're a bit waffly at 6am. 😅 Get some sleep dude.

@NinjaEnShort 5 месяцев назад

I always use the ABS pro 2, it's by far the most tolerant resin I tried and I never saw much difference compared to the "specialized" miniature resins out there.

@zramirez5471 5 месяцев назад

Apparently the reason for the difference between Aluminum and Aluminium has to do with the British Royal Society (that's the science ministry, right?) and the first New York paper to report on aluminum in the US: the BRS accepted "Aluminium", but either trying to save the cost of printing the 'i' or by some clerical error, in the US the circulated name was 'Aluminum', and it stuck.

@stacytuttle9332 5 месяцев назад

They still talk "UK" but sing "American" - so who knows 😄

@MickTee2k 5 месяцев назад

Love ya work mate. re. Reviews vs first impressions - I agree with you, most products have things we don't like about them, but the real question is how easy the limitations are to work around which is something that comes with using the machine. Does the company offer regular firmware updates? How well do they respond to warranty claims etc. These are important things to know and aren't answered in a "quick" review. BTW, I am wondering if the lid for the resin tank is to also keep in the volatiles that would otherwise escape and change the chemistry? Also, what happens if you end up with resin on the top of the build plate? Will it get in and gum up the works?

@KD0AFK33 3 месяца назад

"Super Useful" sounds like a character in a DeadPool movie.

@slunce12 5 месяцев назад

I'm gonna risk you addressing this later in the video (but to be fair, you did just ask for comments on the format, which I like a lot, btw). I think the resin vat has to be stepped like it is for the chonky build plate to work. When it goes down into the resin, it would take up the vast majority of the volume of a straight-sided vat, so you would have almost no resin capacity. The steps on the side give the extra resin a place to go when its pushed out by the build plate. A proper pour spout on vat would still do wonders though, along with some design work to make sure there wouldn't be places the resin can get caught and escape like it did near the rear when emptying it. I do think that the build plate not submerging is a really good feature, it being less annoying and wasting hardly any resin. The messiness while removing prints is what has kept me firmly on the FDM side of 3D printing up till now, but if this feature makes it to a cheaper printer (or some extra money turns up :D), I will probably be taking the plunge into the resin side as well.

@FlaccidGnome 5 месяцев назад

The door on the Creality Mage is my favourite part of that printer. Its a stellar machine (at least it has been for me). I ALMOST bought the M5 but im waiting to see if creality announces another resin printer april 9th.

@knightsljx 2 месяца назад

a vat without a pour spout is an immediate deal breaker for me

@ghalgor 3 месяца назад

Great video, so subbed. I want one of these but so expensive to buy here in Oz. Trying to convince the wife it's worth it :P

@OnceinaSixSide 3 месяца назад

Cheers! There's plenty of great options on the market right now, I recommend taking a good look at the Anycubic Mono M5S Pro, and the new Elegoo Saturns 🫡

@ghalgor 3 месяца назад

@@OnceinaSixSide I have a mono x2 right now and not being able to print due to winter coming on is annoying. The saturns definitely have my interest especially the 4 ultra with the tilt release, just don't know whether its better than the heated bed for the GK2?

@OnceinaSixSide 3 месяца назад

@@ghalgor The heated bed is nice, but don't get tricked into thinking its necessary. A blower heater like that comes with the M5s Pro is just as effective. Also you get better firmware and hardware on these newer machines. The Uniformation has flimsy plastic bits prone to breaking, and only has a small single linear rail if I recall correctly

@ghalgor 3 месяца назад

@@OnceinaSixSide good to know. Currently looking at saturn 4 ultra reviews