First Look: Hantek 6022be USB Oscilloscope! 

Thanks so much for making this. I have been on the fence about this scope. It was good to see it in action

It's good for a beginner to learn. I bought one last December and saw capacitors charging and discharging, used the same function generator to see triangle and square waves and do some measurements. I believe I only paid £40 for it though

Is it bad that I'm sitting here screaming "the blue knob! Turn the blue knob! AHHH!!" 🤣

Thanks for this video. I bought one of these recently as my first "real scope" (The nanoDSO doesn't count) and it's great to see someone that knows how to use a scope attempt to navigate the software... I get to learn two new things at once (because I barely know how to really use a scope). I figure for the cost ($100 AUD in 2023) is perfect for a My First Scope... then I can learn and justify buying a Rigol DS1054z.

The algorithm recommended your channel. I love your content. Thank you.

Get yours here: (affiliate) www.banggood.com/custlink/3vGhlZTi2f Canada - amzn.to/3xHq0Yd USA & World - amzn.to/3tu1pU6

I got the 100mhz version, and your H time base control, blue knob icon, top right comer of screen. I have used this with a netbook working with automotive can bus and it works fine.

Muito obrigado por compartilhar [Thank you for sharing.]

I have same model When I tried to use different laptop Windows 10 would not allow driver input after on line advice changed a command in Win 10 that allowed driver to download from disc.

Great scope for tinkering with basic electronics and Arduino projects . I mean it’s no Pico or a higher end scope by no means but for the price point it does the job and most my needs .

Hantek 6022BE is a modular instrument, the port USBXI is used for concatenate other external instrument (eg: a signal generator) ;-)

How does everyone find it on smooth DC i.e. battery? CH1 seems to suffer from interference but CH2 on the same source is clean.

input voltage when probe x1 is max only 5V ?

Thanks for the look at it. I seriously gave thought to get a USB based scope a few years ago, though my reasons were different. I lived in a smaller house then and had a lot less workspace. What ended up stopping me was making sure I got a decent one that was Linux compatible and also the shared ground with the PC it's connected to was the next issue. I thought if I got one I would build an iso-USB interface if I could. I wonder if the bottom end noise is from the PC? I almost jumped on getting an Owan VDS1022I, Linux, or not but backed out at the last moment.

Thanks wlm

Pretty good bang for the buck there.. I have one looking for a 100+ MHz just because.. The dso5000series are good value as well. But they are glider to 350 than 80. So less advantage for the price. You can get 4 inputs plus ext plus signal generator. Incidentally the 6022 has a signal generator for trimming the prove..but you can't adjust it..so

Maximum measurable voltage by 1:10 probe please???

Скажите альтернативный софт опен хантек работает на виндовс 10 ? Я на семерку не могу установить (

I have the BL version of this scope. It has the digital inputs also. I have used the scope on some of my videos but find it to be very limited. However, if you want to be able to capture waveforms for videos I think it is just fine. BTW you don't have to go to the top menu to change time base or volts. The knobs at the right will do that to and on mine at least there is a dropdown right next to the knobs. Also I find that the Auto button saves a lot of mousing around and time. Biggest drawback is the lack of AC coupling.

What's the vertical resolution? ie how many decimal points can you get in the voltage reading?

This device usb oscilloscope What the max load voltage or load current can show wave forms, and for how many alternate current or voltage Hz...?

I wanted an oscillioscope, thought of getting one of these but I think investing on rigol is more productive.

Nice. Component test possible

Great video. What's the difference between the old and new versions? I bought one a few years back but never got around to using it so I'm thinking of selling it. It's still in it's original package.

anyone know what a flashing red light next to ch 1 is? i think i got the drivers and software installed and everyhting

USB scopes always look neat, but they have such huge limitations over something like a siglent sds 1202x-e that it often makes the useless. I have a hantek usb scope, and it is not even fast enough to capture a switch bounce, far less decode something like 100mhz communication signal.

Hi, did you decide to keep this scope if so, have you been using the scope and how do you like it. Let me know. Thanks. John

Does this software have serial protocol decoder? Or can you use pulseview or sigrok instead?

Would you use this on a car crank position sensor or no?

Does this also work for Windows 11?

Hi, does this oscilloscope only store the data signal on the screen or does it store all the samples from the beginning

7:27 lol, that folder name.

I had this scope for a year or so. The hardware part works more or less fine, USB connection glitches sometimes and you have to reconnect it to the computer, resolution and bandwidth are reasonalble. But the main issue is the useless software: changing time scale sends your trigger point out of the screen bounds and you have to search for it manually, no way to easily navigate through the recorded waveform, no triggering algorithms like catch the n-th triggering point or a package - only edge, no waveform memory, and plenty more minor issues I can't remember now that alltogether make this scope barely usable. All of that is the bare minimum even on the cheapest keysight or tectronix, it's the 21st century, FFS! And the worst issue is that there's no better alternative software, even if you're ready to pay. So if you're looking for your first scope, don't be greedy - add a bit more cash and buy something more reliable.

what is the max rms voltage it can do?

Hi Possible to measure AC millivolts at 100Khz ???

Hi can I save data a few times inside a file

Can you please do a review of Perytech USB Oscilloscope DSO-U2400 400MS/s ??

component tester possible???

The blue ooonnnneeeeee lol

I've always been a bit cautious about USB scopes. Any earthing problems or shorts could damage the P.C.

I'm a broke electronics enthusiast, do you think this could be a good investment?

You are testing a scope with a collection of kits ......sloppy grounds & the rest. Hardly the best environment for accurate analysis. Cheers! Brian

Hantek is not good . It does not have a drift display mode. Picoteck is well done

I purchased a 6022BE product. Then I feel like a waste of money. It does not meet the standards of a technical device . Hardware . It is only capable of receiving + - 5Vdd . Signals larger than +- 5 Vdd will have amplitude distortion. Amplitude distortion is displayed on the screen. It does not achieve +-20V visibility like grid cell. Software . It's the dumbest show in the world. It has no drift mode. Like hospital electrocardiogram machines. When I want to research a long event . For example I set the timebas to 1000 seconds. Hanteck runs in the background and doesn't show anything. Until the scale is 1000 seconds, it will show up on the screen. For 1000 seconds, I couldn't see anything and went to wait for coffee. If the numbers reach explosive danger, then I don't know either. Because Hantek shows nothing on the screen. Hanteck should only install microphones for babies alo hello!

Je ne recommande pas cette marque. Très mal faite. Mauvais service. Mauvais suivi.