First steps to getting a long dormant M35A2 running 

That was the Cummins you were hearing. 😄

@@tacticalrepair I'll listen to that too! Cummins 8.3 or 5.9 swap?

Andy what engine is it in you 939 series truck, is it the naturally aspirated 855 Cummins or is it that little turbocharged engine? IF its the 855 with no turbo charger its essentially just make sure you fuel is actually fuel that is decent condition, ie. no water, no dirt no dead animals etc, you get my drift. Make sure the batteries in the truck are in good condition, check to make sure its got oil in the crank case and go ahead and fire it up, stay off the throttle and let the engine idle for at least 5 minutes before exceeding 1000 rpm, they start amazingly well if just a couple things are checked before starting. IF you have the turbo charged engine you will want to shut the fuel off at the Injection Pump so you can turn the engine over till you have oil pressure on the gauge then after you see that then go ahead and turn the fuel back on at the IP and start the engine. The PRIMARY concern here is to make sure the turbocharger has oil to it before the engine starts. Last thing is just make sure the fuel is in reasonable condition, if the fuel is shit neither truck is going to do will with it! Good luck Andy!

It works. Just need to treat the fuel to keep algae out.

Run it off a Jerry can

He's harmless

Ha,ha, yeh the first time I watched this I had to rewind a couple times to see if I was seeing what I thought I saw. Daughter thought it was cute , ha,ha,. Yeh if he gets coffee cups or other merchandise he will have to put a small wasp nest hidden in the design somewhere, ha,ha,.

above comment by~ JOhn Arnold

@@linarn4671 you can use 12v lights on a 24v circuit. Simply wire the lights in series.

@@tacticalrepair thank you G- , man you super. You need to come up. With an O.D. Shirt for Tactical repair & sell them though you tube like Deuce & Guns does. Don’t forget to have a Deuce on it for a design & Have a wasp or (wasp nest )up in the corner of the shirt somewhere in the corner , ha,ha,. Or even a coffee cup. IDE buy them for sure.

@@Joseywales414 you're not the first person to suggest that. I'll have to make an effort to get something like that going.

Nope

Yes, but I don't know where from. Starter shops still rebuild them so there must be kits.

I think he just collected some and some he bought to resell.

@@tacticalrepair He's selling them? Here is some tips on how to sell a Truck: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-F8P5vGcf-NU.html