It’s good to see that that style of snow blowers are accepted, because here in Norway we have been using it that way since 1967😁 but here we normally combine snowblower on the back and a bucket or a snow blade in the front
I have a snow pusher as well as bucket but the blower does such a good job (and we don't get that much snow anymore) that I don't need anything on the front loader. Plus, it is easier to run the tractor without the added length of the bucket. Thanks for watching and leaving a comment.
For your enclosed courtyard area, you could put the bucket on your FEL and use it that way. Nothing in the snow removal rule book that says you can't use multiple tools to get the job done. For the extra piles of snow when you lift the blower, just run your auger a little longer and give it time to clear out the snow from the housing. It's the same idea with a 2 stage walk behind snowblower, just on a larger scale.
in tight place you shut of the blower drag it to were you can put it just back up a bit before putting back on to not put to much stress on the pto shatf when you turn it back on that what i doo when i clean snow drive way
The pull-type was my first snowblower. Last winter I used a snow pusher on the 4052R but was not happy with the results. I cut pastures with a flail mower so a pull-type blower made more sense to me than needing to operate a blower "in reverse". I also trusted my dealer who recommended the pull-type.
It does very well in fairly deep snow. The max I have done is about 18" but I would suggest that 12" optimal. Clearly a rear-facing snow blower would be better for 18-24"+. If you were expecting a huge snowfall, I would recommend clearing as the snow falls. You need to be able to drive through the snow your are blowing.
Not a fan of those pull blowers only good for certain applications I run a traditional 8 foot blower on a newholland t5110 and I choose it over our pull blower any day of the week
This works well for my application and I prefer not to have to operate the equipment in reverse. Thanks for watching for taking the time to leave a comment. Very much appreciated.
The rear cutting edge is about 1" off the ground. In some of my video footage you can see either the track marks from the tractor tires and/or lines from the poly skid shoes.
