Hello, Thanks for the excellent comment. Please watch my other videos, like, share, comment and subscribe. Other videos ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-oM83hwPkk2g.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-BhX-eVC1Tp0.html
Thanks for the comment. Please share, like, comment, watch my other videos Videos: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HP-pyyWtUhk.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-yt9RvIWh0Vo.html
Thx the comment. I have lots of old fishing equipment and they are waiting for the restoration. Please watch my other videos, like, share, comment, subscribe.
Use screwdrivers that fit the screws better so you don't mangle the screw heads. Be careful using needle-nose pliers to drive a nut; doing this often mangles the nut. Tell us the paint stripper used. Tell us the primer and paint used. Tell us the solution used to clean the plastic components. Tell us where you got / how you made the round label that you glued to the reel.
Thank you for your comment. Please watch my other videos, like, share, comment, subscribe. Thanks for the good advice, I'll take them. I used a general paint remover. Unfortunately, after all this time, I don't even remember the paint primer and top coat. I cleaned the plastic materials with car plastic upholstery cleaner. I printed the labels. ru-vid.com5SX4Uy9U0Y4 ru-vid.com30e2qVsaXrw
@@Blazebb01 Cool! Thanks! I must have been tired or something when I made that post; I intended to be a little gentler, but it appears... something happened... and you got none of the verbiage that would have made the post polite. Sorry about that and, again, thanks for the info. I appreciate it.
No problem commenting. :) I understood completely and thank you for bringing these to my attention. :) I want to make my content better and comments like this help a lot. :)
A very good point. Much better execution indeed. The Soviets could have copied this solution. Thank you for your comment. Please watch my other videos, subscribe, like, share, comment. Old Compression meter restoration: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-yt9RvIWh0Vo.html
Hola. Gracias por el comentario, mira mis otros videos, dale me gusta, comparte, suscríbete. Otro vídeo que te puede interesar: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-SMhBeOtMl9U.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-oM83hwPkk2g.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-yt9RvIWh0Vo.html
Szia! Milyen festékoldóval szedted le a barnát - az új kromofág már nem olyan hatásos, mint a régi... A címlapon szereplő GDN-t javaslom, ha tudod, írg át GDR-re... Egyébként pöpec munka, gratula!
Terrible, why not sandblast it and prime and paint it and smearing grease on the bearing does not pack them you also used different screws to put the cover on and the brown paint showed all of the flaws in your prep work Sorry not a good job and the bail is F-up
THX the comment. But I very curious how you would do it. :D Why not sendblast? If you know and use sandblast then you would you know. Because the alumini very soft metal and damaging the surface. The screws? If you watch full video you see, what I use is manufacturing, 2 screws all the same and 1 different. The paint? I use period of the reel because legacy of my grandfather. PLEASE WATCH AGAIN THE VIDEO! Sorry not a good comment and the bait is F- down. Please watch my other video, like, share, and comment. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-eL0LSXpwVeM.html