Thank you for this. My DC23 Turbine Head suddenly stopped working today after close to 15 years of service. I figured I needed to pry that wheel off to finish disassembling it, but wanted to make sure before I started applying brute force.
2:15 I didn’t find it too hard to pry the cooling duct from the motor if you want to save a few quid. I just slipped a wide chisel under the fixing washer and levered it against the plastic edge of the duct. Cheers for a thorough tutorial mate.
Thanks so much for this video. It gave us the confidence to replace the motor on our Dyson DC 32 when it burnt out after 12 years of service. saved us money and saved us having to throw the whole thing into landfill. Really useful.
My Dyson DC23 just blew its motor. I'm in Australia and actually sourced a motor from the U.K for $210:00AUD free postage. Thank-you for your video Sir - it will be immensely helpful for when the Motor arrives.
You Sir, are my hero (at least as far as is comes to Dyson repairs) ! Thank you so much for this exceptional video. No frills, no bull, just usefull information !!
Thanks a lot. With your explanations i ordered the good article and quickly succeed in replacing the motor with any issue . I guess I would have lost a lot of time without it and perhaps I wouldn't have tried to do it. The way you explain is excellent and the idea to begin with the already disassembled Dyson is very efficient for the global understanding.
Thank you for this very helpful video. I understand that the reason the motor fails is because the post motor filter gets clogged, so this part ought to be replaced too? Are there spares available for this circular HEPA filter, do you know? Thank you.
Good instructions. The back wheel takes major prying to remove, major pressure to install. The hose assembly is best removed by removing all 5 bottom screws, then prying the bottom plate up a bit, then sliding the hose off. A bit fiddly.
London Vacuum Plus no video of the wheel removal, he just mentioned he had to pry it off, he showed there was some damage when he did it. I used a large screwdriver. I didn’t know it had to be pried off at 17:10
Cheers for this. Great video. I didn't need to change the motor or even the brushes. Mine is now clear of 2kg of cat hairs and weird smells. Now if only the seals were flush...
This video is terrible, mate! 😆🤙🏽 But also terrifically informative! I was about to chuck my favorite vacuum and thought I’d have a look on RU-vid. This made my day. Now all I’ve gotta do is find a US spec motor. Just finished replacing the motor on a $2100 Electrolux and it wasn’t half as complicated as the Dyson. But after watching your video I just might pull it off. Thanks very much!
I also had the same question! Brute force (with a long screw driver) was the trick ... this page (along with this video) helped the most too. manchestervacs.co.uk/DysonForum/index.php?topic=2598.0
Thank you for posting your video. It helped me a lot, and kept me from buying a new Dyson at 2-3x the cost of a refurbishment.Replaced the old motor and filters, and cleaned out the cyclones.I wonder if you have ever experienced a slightly toasty smell from a new motor, or that a new motor would bind/not spin freely by hand, prior to the first activation/run?
I know at least the 4 screws for the motor itself are Torx 10 ... I'm guessing you've already done it by now but I managed to snap 2 of them off in the old motor :(
Mine must've been assembled by the same person who assembled yours. Snapped the heads clean off with very little effort. One on each side of the black clam-shell :'(
Hi. Thanks for making this video. I need to replace the power cord on my Dyson DC23. It kept cutting out, and then when I wiggled the cable around half way up, it in and out, then I saw a spark in that area of the cable. Now it doesn't power on at all, so I'm guessing the cable is defective (?). I'm unsure how to get to the connector to replace the cable. If you could help that would be great, thanks
It is probably easiest to replace the entire roller unit, incuding the cable. You can buy them on ebay for example: www.ebay.co.uk/itm/Dyson-dc23-cable-reel-cord-lead-genuine-used/152446004260?_trksid=p2047675.c100011.m1850&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D40656%26meid%3D65e7ea93c0bb4e4783c2a2bb45375fa7%26pid%3D100011%26rk%3D1%26rkt%3D12%26sd%3D152205317778
Can you put a link to where you got the motor. Dyson only list the more periperhal components. Also thanks for the advice regarding motor vs dyson unit. I was going to go cheaper but I get what you're saying about more ease and peace of mind.
Good video indeed but it did not show how to disassemble the unit. The video started by a totally disassembled unit and went through the procedure to install new motor. Although you mentioned that you will show the disassemble at the end of the video; nothing was shown. Repair usually start by disassembling unit followed by changing defective parts and reassembling
I did the same stuff with a DS1 years ago but the 2nd motor died after a few months from overheating...seems the spare parts are pretty shit sometimes.
Mh I remember those motors not being expensive back then now they want almost 100 bucks for a motor I have some doubts it will be a useful decision to buy a broken one and repair it. @@helpfulhandyman8110
The Torx 15 screwdriver is easily obtainable in a DIY store or ironmongers. The motor is provided by household appliance spares dealers in most countries where Dysons are sold. Where do you reside?
Thank you for the video. My DC23 produces a very annoying humming noise and I deduced it coming from the motor area. Anyone had this issue and knows how to remedy it? Thanks in advance.