Five Signs Your Motorcycle Chain NEEDS Replacing FZ6 Example

Подписаться 12 тыс.

Просмотров 70 тыс.

50% 1

In this video I will be going over five ways of assessing your chain for wear. After checking over these five aspects of your chain and sprocket wear you will know how worn your motorcycle chain is. I am using a 2007 Yamaha FZ6 for this chain and sprocket inspection. Check out my channel for many videos on servicing and Yamaha FZ6 and more!
Follow me on instagram @freeheadgasket
Thanks for watching, please SMASH the LIKE and SUBSCRIBE button.
Link to apparel website: free-head-gasket-apparel.crea...
*The following links are affiliate links; I may receive a commission if you purchase through these links. Thank you!*
My favourite tools I have in the garage
Milwaukee 3/8” stubby impact - amzn.to/3QDPSfz
Milwaukee 3/8” Ratcheting wrench - amzn.to/3SEKPy3
Jet 3/8” torque wrench - amzn.to/3u5tHr5
JET 3/8” deep socket set - My preferred socket choice - amzn.to/3uf3Xc0
Wera allen key set - absolute game changer - amzn.to/46eOdTN
JET brand metric hex bit socket set - amzn.to/3G2pNBW
Milwaukee 1/2” impact driver - the ultimate bolt buster - amzn.to/3QXOINC
JET Flex head ratcheting wrench set - amzn.to/4780FGb
Magnetic tray for bolt storage - amzn.to/3QDmxlz

Авто/Мото

Опубликовано:

8 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 101

@jeremys3484 3 года назад

Your well-produced FZ6 maintenance videos are what youtube desperately needed!

@Calvinm 3 года назад

Thank you very much! I'm glad I can provide that to the community.

@XxMr503xX 3 года назад

Very true. Waiting on more

@carlossheppard1745 Год назад

Finally someone who know that they’re talking about regarding chain maintenance. Great job 👏🏾 👏🏾👏🏾👏🏾👏🏾

@Calvinm Год назад

Thanks Carlos! 👍

@masonr8865 3 года назад

so glad you're making these videos, amazing videos specific to this bike. Really helping me and my first bike (05' FZ6)!! Keep up the work dude hope your channel blows up soon

@Calvinm 3 года назад

I'm happy you're enjoying the videos! Thank you!

@michaelprocaccia 3 года назад

Thank you for your vids! You are the perfect guide for FZ6 owners, myself included 😉

@Calvinm 3 года назад

Glad you like them!

@txperec Год назад

Still depends on how the bike is ridden and how often the chain is serviced. I do not lubricate the chain with thick aerosol lubricants, but lubricate with a small amount every 300-400 km. gear oil 80W-90 and then I wipe the excess with a rag, so that it would be clean and everything would not fly to the rear wheel.

@scaredzigger 2 года назад

thank you lol. I did a clutch up on my gsxs 1000 and stretched the chain sooo bad. It made a grinding noise but sprockets are fine. I found some really tight spots and a bent link!

@omaralimujah2475 6 месяцев назад

Awesome tips. Thank you Calvin

@spiritualneophyte7013 2 года назад

Excellent tutorial, thank you for sharing

@gyugyujol 2 месяца назад

excellent practical video mate, no BS

@banius03 Год назад

Excellent video good Sir. You answered my question about my chain.

@Calvinm Год назад

Great! Happy riding 👍

@IssamAF Год назад

Agree on all the points mentioned, except the one where the chain is at some points tight and some hits the plastic. This doesn't always apply, sometimes the rear wheel is not true causing this.

@Evo_Spec 2 месяца назад

Very Helpful. Thank you.

@Kamall_Yahya Год назад

.very good educational video... .keep it up mate...

@ahmedemin2987 3 года назад

Your videos are amazing! Super usefull! 😊 👍

@Calvinm 3 года назад

Thank you! Glad to hear it 👍

@onthepegs Год назад

Nice video, thx. One addon: in my kawasaki manual it says to hang a 10kg weight from the chain when measuring the distance between chain links. I usually hang my wise and measure over the swingarm.

@constantinepenguamo4050 2 года назад

Thank you for the info!

@scott09900 11 месяцев назад

Great information. Thanks.

@josemanuelsanchez5820 Год назад

Muchas gracis por tus videos estas ayudando a mucha gente se anime a hacer el mntenimiento de su moto un brazo y te vay muy bien en l vida ole por ser como eres amigo un saludo desde getafe madrid espa😊ña

@alexharris8500 Год назад

Very well explained 👏. The best I have seen yet. Straight into the explanation. No faffing or b sh1t . Thank you, explained fully in seconds.

@Calvinm Год назад

Thank you!

@eastcoastmostwanted710 12 дней назад

Nice vid

@thegutsyninja8851 2 месяца назад

Excellent video without anything but solid information 👍🏽

@MyRuslan1982 2 года назад

Great info👍👍👍

@ariffbasri 2 года назад

Thanks mate.. I appreciate it

@BoronKrypton 8 месяцев назад

Very good explananation

@meelaud2103 Год назад

hey man, i know his video is old but thank you. this might be the noise i keep hearing while i accelerate . Thanks obv i will take it to a mechanic but its good to know some sort of idea going on.

@Calvinm Год назад

You’re welcome! Hopefully you get the issue sorted! 👍

@ghosttoast8326 Год назад

Thank you so much for all your videos

@GriffinVriens Год назад

Thanks man!

@imustbegettinolder4434 2 года назад

Thank you. Most helpful.

@Calvinm 2 года назад

You’re very welcome!

@rhemyis 3 года назад

I have 13,000mi on a 2006 F4i with oem chain and sprocket and was looking for a new chain kit but I am not sure I need one at this mileage. One thing gets me confused is the test with pulling the chain from the rear sprocket, I can make a little bit of space to see light between the chain and the sprocket bit I must pull the chain quite hard to make that space, isn't so easy like in the video. The rest of the kit is in good shape, sprockets look good with square shape at the top, chain is flexible without stiff links, I might get another 5000mi from this kit maybe.

@billbraxton7192 Год назад

thanks for this! looks like i gotta change my xj550 chain now haha.

@Calvinm Год назад

Go for it!

@kissmypaleass Год назад

Good stuff,thanks bro

@Calvinm Год назад

You’re welcome! 👍

@aleksandarkojic1714 Год назад

can you make a recording. how to set the chain correctly. but the complete measurement and where it should be adjusted, when you turn the wheel and where exactly to know that it should be adjusted and how much

@RRDfinland 2 месяца назад

What about chain rattle certain rpm? i tighten chain and few rides it came back New chain/sprocket, alligment seems good. Would it be chain itself?? Because its price started model😅 thx for the video btw👍

@1683clifton 9 месяцев назад

I used to think the soundgarden song was " break this rusty chain".

@brocephusbro-cee-fus1367 2 года назад

Hey bud please help I'm trying to get the fuel pump back together which way the nipple the joins the top piece of the fuel pump to the bottom piece on the fuel outlet line 🙏

@waseemullah07 2 года назад

@matthewblair8197 3 месяца назад

were you get the cargo side racks ?

@iamjptheadventurer 2 месяца назад

A Kawasaki 650 manual says to check chain tension from the tight spot. So its gonna have them.

@tylerbednarchik3445 2 месяца назад

So when my bike gets going like 7-9 mph my drive chain make ticking noise it’s consistent. Is that Norman? I’ve clean my chain and lubed and still making the noise

@sugardaddy9721 4 месяца назад

My chain did make the clicky sound when riding, then I add some chain lube and the noise is gone. Should I continue to use it?

@hailboognish3858 6 месяцев назад

I’m going to get a new chain as mine has all the bad you just covered in the video. I’m the third owner of the bike, no idea what’s been done before me except the Mickey Mouse wiring for the front signals with the extra bulbs. I’m guessing I should probably get new sprockets as well? How much of a pita is that to do especially when you’re not that mechanically inclined? I have an 08 sv650. Thanks for the video, it was clear, concise and informative.

@Calvinm 6 месяцев назад

I would recommend changing both sprockets with the new chain. It helps them wear evenly. It isn’t to much of a pain. If you can change a chain you can change sprockets too. I made a video on this process for you, linked below. Video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-jgU6b07K-Qs.html

@hailboognish3858 6 месяцев назад

@@Calvinmthanks so much!

@Rubenfz6 3 года назад

Put i new kit on this week, same problems

@Calvinm 3 года назад

These FZ6's are getting old. More of them are going to be needing a new chain soon. I was a bit caught off guard by my chain wear.

@h4xi0rek 2 года назад

Actually I think this is something specific to FZ6 that it creates this uneven tension. I have been having this issue even on the freshly mounted chains just after a few thousand kilometers. Just remember to set the tension on the tight part of the chain. 1-1.5cm of difference I would not really sweat that much about. Better to have too loose chain than too tight one. Stiff links are pretty bad though and should prompt one to replace the chain ASAP. Also any missing o/x-rings - I had it happen on a brand new DID ZVMX after 7k km, even though the chain was properly maintained. The shop returned me the money under warranty, after having the chain inspected by the producer.

@laughingdog1125 2 года назад

i thought you set the tension for the slackest part of the chain

@h4xi0rek 2 года назад

@@laughingdog1125 nope, you set it for the tightest. Too much tension stresses the output shaft bearing as well as puts you at risk of snapping the chain. It also severely reduces its service life.

@chris_e3665 3 года назад

Damnn i really need a new one

@iliketurtles4761 2 года назад

Hope u did bro 💯

@lucamarcio4110 3 года назад

Well Done!!! Keep going! Thanks!

@Calvinm 3 года назад

Thank you! Will do 👍

@BrazzilPMz Год назад

Hey brother, I have a 2004 FZ6 Fazer, and I can not remove my front sprocket, I just wanted to know if the front sprocket is reversed threads or no? Thank you

@Calvinm Год назад

The FZ6 front sprocket is regular thread direction, make sure you have the indented collar on the nut punched out of the groove.

@DavidBossBiker 3 года назад

Wait ... so the maximum distance from center to center must be 239 mm right ? then that distance can't be less than it or must be less than it ?

@Calvinm 3 года назад

Ya the max distance from centre to centre is 239.3mm, it cannot be greater than that measurement. If you measure 239.3mm that means the chain has stretched about 1% which is the service limit for an O ring chain generally.

@thra5herxb12s 11 месяцев назад

You can see a quarter of the tooth with a new chain. When you can see a half of the tooth, the chain is worn out. You can catch it early enough to get more life from the sprockets, but never more than 2 chains per sprocket set.

@SlobaMusic 3 года назад

Best regards. The channel is great for all praise. I would like you to do research and video for bad vibrations in FZ6 s2 ... The masters are bad and have no knowledge. I read on the forums that these vibrations occur due to bad spark plug cables, more precisely spark plug cables. I have this problem and I can't solve it. The vibrations move at 4500 rpm, 6000rpm and later from the vibrations I can't see how much the mirror is shaking. Thanks in advance.

@Calvinm 3 года назад

Hmm that does sound like a bad vibration! Usually vibrations are related to wheel balance or tire pressure. I'll look into it though.

@SlobaMusic 3 года назад

Many forums write about this problem. It is very common. I can't use the rearview mirror over 130km / h, I can't see anything. There are terrible vibrations on the steering wheel, the steering wheel, the tank, and the arms and legs are tired. Unfortunately, no engine mechanic in my city has a clue how to solve the problem. The tires are ok, the balance is ok, the chain and sprockets are ok, the fork is ok, the weights on the steering wheel are ok.

@bernardogartalia9029 2 года назад

Sloba Music, I also have some experience on bad vibrations on my bike which I almost sold it. In one of my desperate efforts to find the cause, I chanced upon a loose engine support nut below the crank case. I tightened it and the vibrations are gone. I would say it might be the cause of your problem, you can give it a try, hope it helps.

@SlobaMusic 2 года назад

@@bernardogartalia9029 Can you send me pictures of where that loose nut is?

@bernardogartalia9029 2 года назад

@@SlobaMusic please give me your email address so i can send the picture

@sandman4897 Год назад

I neglected my chain for a while i knew i had to clean and lube it especially at my new job where the parking is literally dry dirt and gets everywhere and i cleaned and cleaned the chain and still hear noise i probably waited to long

@Calvinm Год назад

Ya, can’t really save a chain once it’s ticking. Besides, you don’t want your chain coming apart on the road. That can really damage your engine, plastics or swing arm.

@M.......A Год назад

how to differentiate between chain wearing off and chain adjustment needs?

@badtzmaru17 Год назад

Clean, lube, and adjust the chain properly then assess whether it needs to be replaced or not. Everything he's doing here is with a properly adjusted chain. He can't adjust the slack out, it's just THAT badly worn.

@joshssauce 3 года назад

I checked mine I think it’s stretched I’m not sure, I ordered a new one anyways. Better than fixing a hole in the transmission case.

@Calvinm 3 года назад

And being stranded isn't fun! Hope the install goes well!

@emmanuelgeorge4112 2 года назад

When we getting more Fazer maintenance videos

@Calvinm 2 года назад

What other FZ6 maintenance videos do you want to see?

@shainexxxsescrimshaw7605 Год назад

My chain doesn't seem worn, but it still has tight spots, looks like it's new chain and sprockets for me

@mattadams0690 2 года назад

I just bought an 04 and have been referring your videos & the manual to do some maintenance. Are you pronouncing FZ as “Ef Zed” ? Is that how to say it and not “Ef Zee”?

@Calvinm 2 года назад

It’s a Canadian thing I think 😅 in my head when ever I read “FZ6” I read it “ef-zed-six”. Not really sure why, it just “feels” right. To each their own I guess.

@mattadams0690 2 года назад

@@Calvinm gotcha, every video I’ve watched regarding these bikes everyone else says it like you so I was unsure lol!

@mrschwifty5564 10 месяцев назад

Would a bad chain cause vibration at highway speeds ?

@Calvinm 10 месяцев назад

Not really, it could create a frequent tick though. You would feel it through your seat and foot pegs

@iliketurtles4761 2 года назад

Can I drive it to a near shop ? If it’s a lil loose?

@Calvinm 2 года назад

Ya, I've ridden by bike by accident with a fairly loose chain.

@iliketurtles4761 2 года назад

@@Calvinm thanks bro .. i did the slack measurements n it looks good.. just the sprockets .. I think maybe because it’s dirty … I don’t have a rear lift yet .. my bike barely has 130 miles but I think I mite of hit a few bumps .. mite that be a reason??? Thanks allot for your reply 💯🙌🏽

@Mmouse_ 11 месяцев назад

The longer I've ridden bikes and dealt with chains at work (simplex, duplex and triplex) the more I'm realising chains... Are a gigantic pain in the ass. I've recently installed an Oring chain on my bike that's way over rated for the size of my bike, and I'm hoping I don't have to mess around with it too much other than a bit of lube from time to time.

@jarrod1687 7 месяцев назад

I'm new to bikes and I agree, never ending adjusting and replacing chains

@wyattcalton2438 4 месяца назад

Thought my gear box was going to gernade until i noticed my chain has alot of stiff spots

@Lucky_Logan 2 года назад

The chain and rear tire are NOT rotating in different directions…..ijs.

@mbjsrl Месяц назад

well...the lower section of the chain is actually going backwards...

@marekryszard Год назад

"Zed"

@nathanaeltendam4874 11 месяцев назад

Yeah my chain is fucked lmao

@Owner_69_ Год назад

My new sprockets and chain(not cheapest) has different tight when spinning wheel also on connected pin link don't move slightly, some say that it's normal and have deflection on shortest spot. Permissible chain length is good, don't know what to do because motorcycle wobbling