FIX: Aux Channels Not Working // Crossfire Nano Rx 8ch to 12ch mode tutorial 

Thanks to PCBWay for sponsoring this video. Check out www.pcbway.com/ for custom printed circuit boards, electronics, and rapid prototyping services (Use my referral link to get $5 of New User Free Credit) www.pcbway.com/setinvite.aspx... !
If you are using a Crossfire Nano Rx and AUX channels 5-8 (or, channels 9 through 12) are not working (but you know they SHOULD be otherwise), you may need to change your Rx into the 12ch mode. I'll show you how.
Here's that FB post I mentioned: / 1356028461598162
-------------
🧠 FREE RESOURCES, 3D Printable Designs, and more for FPV Drones, RC Aircraft & 3D Printing at rcwithadam.com/
Want to support RCwithAdam? ↴
KO-FI: ko-fi.com/rcwithadam
OR
PATREON: / rcwithadam
Thanks!
-------
Mandatory Affiliate Disclaimer:
Any links in this description may be affiliate links, which means I make a very small commission (at no additional cost to you) when you make a purchase through that link.
*DISCLAIMER: Remember to always use caution and your best judgement when building and flying RC aircraft, and when working with 3D printers, electronics, or electrical devices. Be mindful of the laws, regulations, and best practices for your particular location. Be a good neighbor, and HAVE FUN!*
-----------
About RCwithAdam: Adam's goal is to HELP YOU build your skills and eliminate frustration and confusion through creative, educational, and encouraging videos featuring Radio Control airplanes, FPV drones, electronics, and 3D printing!
#RCwithAdam #fpvdrone #DJI

Наука