No video :(

Fix BMW Tire Pressure TPM Malfunction TPMS repair 36106793122 TPM RDC, applicable to MANY BMW & Mini

Подписаться 10 тыс.

Просмотров 176 тыс.

50% 1

Why and how I repaired (not replaced!) the RDC in 2012 BMW X5 35i to clear TPM malfunction warning message. RDC (stands for Tire Pressure Control in German) # 36106793122 which I believe has been superceded by 36106868194. This is used in the Gen 3 BMW TPM system (sometimes called the Low Cost system) because it only has 5 components ... 4 sensors inside the 4 tires and the RDC. Other BMW TPM systems have as many as 8-10 components - 4 sensors in the 4 tires, 4 receiver/transmitters in the 4 wheel wells, an antenna and a control unit.
This RDC is used in MANY BMW and mini Cooper models (SEE BELOW).
Additionally, if you're able to do the same repair I did, you theoretically avoid software coding for a new, replacement RDC (there is some disagreement among BMW enthusiasts as whether this is true or not)
If this helps YOU please help ME by subscribing to my channel. Thank you.
This video may also apply to these models:
BMW 1 Series (E82,E88) 128i Convertible 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
BMW 1 Series (E82,E88) 128i Coupe 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
BMW 1 Series (E82,E88) 135i Convertible 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
BMW 1 Series (E82,E88) 135i Coupe 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
BMW 1 Series (E82,E88) Active e Coupe 2011, 2012
BMW 1 Series (E82,E88) eDrive 1 Coupe 2011, 2012
BMW 1 Series (E82,E88) M Coupe Coupe 2011, 2012
BMW 1 Series (E82,E88) M Coupé Coupe 2011, 2012
BMW 3 Series (E21,E30,E36,E46,E90,E91,E92,E93) 323i Sedan 2008, 2009, 2010, 2011, 2012
BMW 3 Series (E21,E30,E36,E46,E90,E91,E92,E93) 328i Convertible 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
BMW 3 Series (E21,E30,E36,E46,E90,E91,E92,E93) 328i Coupe 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
BMW 3 Series (E21,E30,E36,E46,E90,E91,E92,E93) 328i Sedan 2007, 2008, 2009, 2010, 2011, 2012
BMW 3 Series (E21,E30,E36,E46,E90,E91,E92,E93) 328i Wagon 2007, 2008, 2009, 2010, 2011, 2012
BMW 3 Series (E21,E30,E36,E46,E90,E91,E92,E93) 328xi Coupe 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
BMW 3 Series (E21,E30,E36,E46,E90,E91,E92,E93) 328xi Sedan 2008, 2009, 2010, 2011, 2012
BMW 3 Series (E21,E30,E36,E46,E90,E91,E92,E93) 328xi Wagon 2008, 2009, 2010, 2011, 2012
BMW 3 Series (E21,E30,E36,E46,E90,E91,E92,E93) 335d Sedan 2007, 2008, 2009, 2010, 2011, 2012
BMW 3 Series (E21,E30,E36,E46,E90,E91,E92,E93) 335i Convertible 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
BMW 3 Series (E21,E30,E36,E46,E90,E91,E92,E93) 335i Coupe 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
BMW 3 Series (E21,E30,E36,E46,E90,E91,E92,E93) 335i Sedan 2008, 2009, 2010, 2011, 2012
BMW 3 Series (E21,E30,E36,E46,E90,E91,E92,E93) 335is Convertible 2009, 2010, 2011, 2012, 2013, 2014
BMW 3 Series (E21,E30,E36,E46,E90,E91,E92,E93) 335is Coupe 2009, 2010, 2011, 2012, 2013
BMW 3 Series (E21,E30,E36,E46,E90,E91,E92,E93) 335xi Coupe 2007, 2008, 2009, 2010, 2011, 2012, 2013
BMW 3 Series (E21,E30,E36,E46,E90,E91,E92,E93) 335xi Sedan 2008, 2009, 2010, 2011, 2012
BMW 3 Series (E21,E30,E36,E46,E90,E91,E92,E93) M3 Convertible 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
BMW 3 Series (E21,E30,E36,E46,E90,E91,E92,E93) M3 Coupe 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
BMW 3 Series (E21,E30,E36,E46,E90,E91,E92,E93) M3 Sedan 2008, 2009, 2010, 2011, 2012
BMW X Series (E53,E70,E71,E83) X1 28i 2010, 2011, 2012, 2013, 2014, 2015
BMW X Series (E53,E70,E71,E83) X1 28iX 2010, 2011, 2012, 2013, 2014, 2015
BMW X Series (E53,E70,E71,E83) X1 35iX 2009, 2010, 2011, 2012, 2013, 2014, 2015
BMW X Series (E53,E70,E71,E83) X5 3.0si 2006, 2007, 2008, 2009, 2010
BMW X Series (E53,E70,E71,E83) X5 3.5d 2008, 2009, 2010
BMW X Series (E53,E70,E71,E83) X5 35dX 2009, 2010, 2011, 2012, 2013
BMW X Series (E53,E70,E71,E83) X5 35iX 2009, 2010, 2011, 2012, 2013
BMW X Series (E53,E70,E71,E83) X5 4.8i 2006, 2007, 2008, 2009, 2010
BMW X Series (E53,E70,E71,E83) X5 50iX 2009, 2010, 2011, 2012, 2013
BMW X Series (E53,E70,E71,E83) X5 M 2008, 2009, 2010, 2011, 2012, 2013
BMW X Series (E53,E70,E71,E83) X6 35iX 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
BMW X Series (E53,E70,E71,E83) X6 50iX 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
BMW X Series (E53,E70,E71,E83) X6 M 2008, 2009, 2010, 2011, 2012, 2013, 2014
BMW Z Series (E52,E85,E86,E89) Z4 28i Convertible 2011, 2012, 2013, 2014, 2015, 2016, 2017
BMW Z Series (E52,E85,E86,E89) Z4 30i Convertible 2008, 2009, 2010, 2011, 2012
BMW Z Series (E52,E85,E86,E89) Z4 35i Convertible 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
BMW Z Series (E52,E85,E86,E89) Z4 35is Convertible 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
2009-2013 Mini Cooper Hatchback and S (R56)
2009-2014 Mini Cooper Clubman and S (R55)
2009-2015 Mini Cooper Convertible and S (R57)
1 Series E82/E88
3 Series E90/E91/E92/E93
X1 E84
X5 E70
X6 E71
Z4 E89
Other Part #'s: 36106795768 ; 36106795846

Опубликовано:

22 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 164

@bobh4623 9 месяцев назад

I contacted BMW to see about replacing the RDC - part was $470.84 and then they had to program it for another $240! Crazy... So I followed this video, removed the RDC, cut it open... and to my surprise, mine looked clean as a whistle! Nonetheless, I took a QTip and some Isopropyl and washed over all the electronic circuits, put it back together, used some Christy's 10Mil Pipe Wrap Tape to hold it together (since I figured the fix wasn't going to work anyway, because I didn't see any corrosion. Put the unit back in and a week later not a single problem yet! WHAT? Was it the cleaning I did that worked? Was the RDC plug just not snug and by removing and putting it back it, it fixed itself? Who cares... It works and I've saved over $700! Thanks for this video.

@garymiller817 Год назад

Excellent tutorial! I was an electronic technician for years repairing radios and televisions and have a great deal of appreciation for your technique. Five stars! 🌟🌟🌟🌟🌟

@michaelt7396 4 года назад

Wow 😳. Thank you sir for the very very detailed and perfectly explained video. I’ve been having the “TPM Malfunction” issue for months now. Never really thought it could be the little module responsible for this headache. My shop told me my sensors are fine. I have no loss in pressure so this is definitely my issue. I have a 2012 X5. Thanks again.

@YuDaMan 4 года назад

Good luck. I'd appreciate a LIKE and a SUBSCRIBE. It would help me a lot! THANKS!

@hackmech8651 Год назад

I had the same issue. I'm not sure if cleaning the inside circuit board corrosion repaired my module, but it didn't hurt. I coated the cleaned locations on the circuit board with clear auto paint ( let dry overnight). Then used epoxy to reseal the cover back over the circuit board. I noticed one of my module's pin had white corrosion (likely salts). Cleaned that up and coated all four pins with conductive grease (not dielectric grease). Put some dielectric grease on the female connector (white portion) to stop future water intrusion. Connected it back on the car and the TPMS is functioning again. My guess is the pin corrosion cause the module to act like it failed. Restoring the conductivity of the pins brought it back to life. Preventive maintenance tip. Pop your RDC module out, coat the pins with conductive grease and coat the female connector with dielectric grease.

@ERGMIAMI 4 года назад

Very useful. Good explanation of the troubleshooting and problem-solving steps. We need more content like this for the DIY'ers. Thank you, I'm having the same issue with my '11 550.

@emilyballenger4545 Год назад

Thank you for the video! Our system is saying the same problem. We have brand new tires and brand new sensors and your video has encouraged us to try this out tomorrow. Wish us luck.

@m0al1_ 2 года назад

2011 535i - my TPMS malfunction has been on forever. Initially, went to discount tire, and they confirmed all of my sensors are working fine. I've just learnt to deal with it. Didn't know about the RDC component. Will take a look into the RDC. Thank you

@YuDaMan 2 года назад

BE sure to LIKE and subscribe. THAT will really help me1 THANKS!!!!

@kristinduplantis152 5 лет назад

Thanks for the video! I have had a similar issue with my TPMS system on my 2007 335i. I have ignored it in favor of just checking the tire pressure myself. The warning light drives me nuts so I’m gonna give this a shot.

@kevinbeamer8161 Год назад

2012 BMW X3 F25 28i - TPM malfunction 5 amp fuse in the rear passenger panel was OK # (fuse #139 I think). RDC antenna module near right rear tire seemed OK - meaning installing new modules didn't clear the error condition. Using my Autel MaxiTPMS TS508WF to scan all four wheel sensors, I discovered that a single faulty wheel sensor was the cause of the "Tire Pressure Monitor malfunction" error on the iDrive screen. $75 to replace the sensor cleared the error condition.

@doclees11 5 лет назад

Thanks for the repair video. Haven't pulled my yet but same symptoms so hopefully repairable. Units now can be found for about $85.

@YuDaMan 5 лет назад

it you buy a used part, let me know if it "plugs and plays" for you without coding/programming. Thanks.

@doclees11 5 лет назад

@@YuDaMan haven't taken parts of to find it yet but finding it seems the hardest part.

@DynamicRacing-lm8ry 6 месяцев назад

2011 528i having the same issue … The light comes on and it does it’s reset says it’s malfunctioning and does it all over again… So I’m definitely going to try this out! Thanks for the video!! I’ll let you know how it works out!!

@simonreeves2017 5 лет назад

TPMS - another piece of useless technology we do not need, like blind spot monitoring, utter rubbish. In the good old days, drivers knew how to check their tyres and adjust their mirrors. The world has gone utterly nuts!

@Yeer718 4 года назад

Nannies like these are for people that lack the capacity to operate a motor vehicle properly.

@user-wp6rx7uy1j 2 года назад

🤣🤣

@underourrock Год назад

Just like extra cylinders, seat belts, windshields... All these useless additions to a vehicle. You might as well go down to the 1 cylinder piece of crap they first came out with and stick with that. At 70 mph, I was glad to find out my tire had a medium size hole in it before complete pressure loss. When the controller dies I'll replace it from a junk yard or eBay. Not a big deal. If you don't want to replace yours then don't. No one is making you.

@user-ue8vp6fy8y Год назад

The blindspot thing is incredibly useful. In big cars it can be difficult to see and it definitely helps.

@modernkaos55 4 года назад

One note: I have heard that if you source one used that the software version (upper right hand side), and/or the date code (lower right hand side) must be the same. This is to avoid having to recode the module. Some years may have the date code, while others may have both the software version and the date code printed.

@YuDaMan 4 года назад

Thanks for sharing your knowledge. Great input!

@Shamus71 5 лет назад

Ok.. good news!! I purchased a used RDC module off eBay, installed it, replaced blown fuse and cleared the fault codes with Carly.. works perfectly without any programming... 4 green wheels on the iDrive screen. So I wonder what the consensus is of plug and play with these modules is? Anyways works for me at a $50 cost 👍👍

@YuDaMan 5 лет назад

Thanks for confirming no coding was required. Maybe that will help someone the in future. I presume you cleared fault codes with idrive and not with NCS expert nor Inpa.

@Shamus71 5 лет назад

YuDaMan I cleared codes with the Carly BMW app and dongle for iPhone.. I’m actually surprised everything worked.. all wheel sensors are visible as well. This definitely solves a mystery for others for sure. Not sure how things would be with a brand new module. The module I purchased was from a low mileage 2015 F30 and o have a 2011 LCI E90, so these modules are the same for these cars.

@brazoscleaningservices1080 3 года назад

Where is that fuse located ?

@patbfd 2 года назад

There is a vent Orange Plug that has a hole in it that let’s in moisture that causes these problems. Plug the hole with silicone or RTV

@kenwoody4294 Год назад

I pulled my unit and opened it up, it looked absolutely pristine. I went ahead and cleaned it and sealed it, reinstalled and the error is still there. The batteries are all good in the tires. So either a bad RDC unit entirely or bad wiring to the RDC? Should I be chasing down things like wheel bearings, brake dust, etc?

@derekkchung Год назад

Helpful. Thanks. I wonder how the RDC control unit can tell which transmitter is on which wheel. By the signal strength due to the subtle distance to each?

@robertosypowicz7943 2 года назад

Thank you very much for the video! Take care!

@YuDaMan 2 года назад

Glad it helped. Be sure to LIKE and subscribe. THAT will really help me! THANKS!!!

@johnalvitre3154 2 года назад

Thank You. great video and it gave me food for thought.

@dwbcorvette 2 года назад

Great video. Just too late for me. Paid $972.58 at a dealer for this $44.00 (incl. ship & tax, new OEM BMW part) and programming. Part was off a 2018, so not even 5 years old. Southern California car. Dry, no snow.

@czearfoss Год назад

2010 328i e90 - Had 2 instance of the dashboard going crazy 6 months apart (so not footwell module, which would be constant). Followed this time by tpms inactive alert. Code for K-Can comms from various modules. In my case that blue corrosion was around the 4 main pin contacts on the board - even had a bb sized piece rattling around. Especially bad on one of the contacts on each side of the board. I was able to just clean most of it off with pick and brush and elec contact cleaner - good enough I hope because I didn't want to damage anything. I'm really wondering could have generated this stuff? bad materials? I noticed an orange rubber cylinder thing in the housing - I wonder if that is for pressure/moisture egress? and could be how moisture or contaminants get in? Also, Xacto wouldn't work for me - had to go dremel! Cut into that rim a few millimeters and could get a blade in there to twist and crack it open.

@user-nw9ok5fr9w 5 месяцев назад

Very useful info, just not sure I can do this myself😕

@jmsrt4 5 лет назад

My gf's 2011 328xi rdc module died. Dealer quoted her $1100 to replace. I bought one used on ebay for 84 bucks. Total time to remove old module, connect new module, and code it was around 3 minutes. I did it in the dark and I don't work on cars

@YuDaMan 5 лет назад

What did you use to code it? Disappointed to hear coding was needed. I've been trying to figure out if it will "plug and play" or if coding is needed.

@jmsrt4 5 лет назад

@@YuDaMan The instructions to download the program is in this link www.e90post.com/forums/showthread.php?t=1204192. The program is called ncs expert. It's a bit of a pain to download the program but the coding is very very easy. Besides the rdc module the only thing you will need is a kdcan cable. I bought one from bimmergeeks its guaranteed to work unlike amazon or ebay ones

@jmsrt4 5 лет назад

Just used my laptop btw

@ABWSKITCHEN Год назад

@@jmsrt4 thank you, my module fails when the weather is cold, whenever is warm it goes good. Has been doing this since 2018, it works months and a week or two gives me troubles. I replaced the transponder but need to code it, tomorrow I will try with a friend that is a BMW mechanic, if not, either I do what you mention or buy a coding device.

@Pantimoto Год назад

Amazing vid, very well explained

@davewallace9048 2 года назад

Thank you for the video it helped me Immensely. Exactly the problem!!

@YuDaMan 2 года назад

I'm glad you found my video to be helpful. Be sure to LIKE and Subscribe. THAT will really help ME! Thanks.

@hamiltonbeaniecat2826 15 часов назад

do u need to remove the driver's rear wheel to access? btw mine is x5 35d

@ABWSKITCHEN Год назад

Hi there, I bought a used part and is doing the same thing, so tomorrow I will open one to see how it looks like, probably the used part is as bad as the original, if that is the case, I will try to fix it or will get a new one once I know for sure that it's the problem. The dealer charges $ 150 dollars to scan the car, then the part installed goes around $ 1,200. The new part is only $ 100. I can install it in 10 minutes.

@xanidel 4 года назад

Excellent video . Super helpful. thanks!

@geoffstafford744 Год назад

Super video, very helpful. I've located the receiver module, under the boot/truck floor in my 2014 X1. So far I have failed to release it from the case/socket. Have you any words of wisdom on this issue, Many thanks,

@YuDaMan Год назад

if it is not exposed to the elements, it might be ok. On the X5 it's OUTSIDE the vehicle and mounted in a plastic clip that it snaps into.

@stephenlutz835 5 лет назад

Fantastic! Dealer quote was $900

@YuDaMan 5 лет назад

glad you liked my video. I hope you subscribe to my channel. THANKS!

@s.linastaffords6744 5 лет назад

Crazy charged me 500$ for 2 sensors...smh will the sensor failure cause the dash and odometer to not work?

@nathaniellaboy7257 4 года назад

@@s.linastaffords6744 did your dash dim and flash? Because my 13 x1 was doing that with a warning electrical malfunction.

@tonyfetter1054 5 лет назад

Thank you for the video. Great information!

@cjfisher47 4 года назад

Excellent video. Thank you

@thomasmchugh6421 3 года назад

Excellent video -Having the same issue with my 2011 535XI

@jerseyboym5 Год назад

Hey I have a 2011 535xi, how did you fix it? How much did it cost?

@brandonbossier6063 5 лет назад

2012 BMW 328i msport coupe antenna location inside passenger side rear wheel well.

@Shamus71 5 лет назад

Thanks for this video. Over the last week with all the rain we’ve been getting here in NJ this TPMS malfunction has happened randomly and cleared up on its own. I have the same lower cost system you have in my 2011 328xi. I’ll be pulling the module and investigating. This will be the second RDC module issue that I’ve had.. first time caused all kinds of CAN bus errors such as AC system and gauge cluster reboots while driving.. that module was replaced under warranty.. this time I’m in my own. .. I wonder if it would be a good idea to put a small silica jell pack inside the casing to absorb the moisture?

@blackmambalim 5 лет назад

Just took mine apart ,it was exactly like yours ,didn't put it back yet ,waiting it to dry ,I'm confident it was the problem.I have a question ,if one of the sensors on the wheels was bad ,it would show that wheel in yellow and the other 3 in green right ?

@YuDaMan 5 лет назад

It has been a log time since I had a low tire pressure warning but if I recall correctly, yes, the low tire does show up on idrive as yellow. I presume a faulty sensor would also show up yellow but that is only a presumption. Thanks for subscribing.

@2FTermination 3 года назад

Thanks for the video !

@YuDaMan 2 года назад

Be sure to LIKE and subscribe. That would really help me. THANKS!!!!

@grzegorzszymanowski4091 3 года назад

Hi, several days ago it came the same malfunction to my vehicle. Imposible to launch tire presure controll. Before that i was received many times during brake to stop my vehicle information that there is a problem with tire presure and i should to move to BMW service. Well, this service will cost like another new vehicle, therefore i try to do this repair like you show here. Thank you very much. Greetings from Germany. Ps. there is a nano protec spray solution for every electrical conection and components.

@maxpayne579 5 лет назад

Awesome video, thank you.

@gusibrahim6961 3 года назад

How can I survive without a TPM?!! So much useless info on the dash but no battery life indicator?!!

@pault2651 Год назад

This is great info, replaced all 4 sensors, nothing, fuse ok, I guess I need to check that part. My question is how do I know where it is as I hear some saying in the trunk an you showed under car. Anybody knows? This is for a 2011 328xi sedan Thanks and great video

@ERGMIAMI 4 года назад

Now I just need to locate the damn RDC in my car

@YuDaMan 4 года назад

check out Brandon's comment for the location in his 2012 sedan. Have you looked at realoem.com ? there's lots of good info there and good drawings

@MrFlashdaemon 4 года назад

Actually there is nothing to code in this particular module, so you can replace it without coding. The only thing that the VIN number will be different, but it's not a problem. Anyway, such used modules in Russia cost around $80, so 300-600 sounds ridiculous.

@YuDaMan 4 года назад

Thank you for confirming coding is not required.

@MrFlashdaemon 4 года назад

YuDaMan well, for the newer module (6868194) there are several params, which should be changed during coding. They are related to the market (US/EU), but I don't think that there is much difference too if it wouldn't be coded correctly

@nathanielpike Год назад

Without coding, "TPM malfunction" is present in CIC.

@MrFlashdaemon Год назад

@@nathanielpike what exactly you've done? Just replaced a faulty module with the new one?

@nathanielpike Год назад

@@MrFlashdaemon Yes in my case I had replaced a faulty module with a new one. The electrical faults went away but TPM malfunction wouldn't go away until it was coded.

@DTachaJr 4 года назад

My 335is seems to have that same deal, I wonder if I have that same unit in my car? What do you say? great info either way.

@YuDaMan 4 года назад

use bmwfans.info and see if the part number for your vehicle is the same as mine. I'd appreciate a LIKE and a subscription. THANKS!

@user-sx4sc7sn2v 2 года назад

Thank you! You very help me!

@YuDaMan 2 года назад

Be sure to LIKE and subscribe. THAT will really help me. THANKS!!!

@Shamus71 5 лет назад

Update. My TPMS definitively took a crap today causing my I-Drive controller to not work as well as some strange CAN communication errors. So I found the RDC module which looks exactly like the one in your video. By the way for a 2011 E90.. it is located in the wheel liner behind the right rear wheel. So I pulled the module and noticed that it had a bulge in the casing near the connector end. I opened it up and found that it wasn’t water damaged, but stunk to high heaven of burnt capacitor smell, a few components on the board are fried. I also found out the this blew the TPMS fuse 27 as well. So if I buy a new one of these will it be plug and play with the exception of the wheel sensors will need to be re married to the module??

@YuDaMan 5 лет назад

Hopefully an expert will opine. I have been trying to determine if installing a NEW RDC requires coding or not. The info I've found thus far is contradictory so perhaps you will become the expert and post your conclusion here. Good luck.

@Shamus71 5 лет назад

YuDaMan I hope this will be plug and play.. I just purchased a used module from a 2016 car that is the same part as the one I have. $50 .. 30 day guarantee.. hope it works. I’m trying to get NCS expert and BMW tools running and getting myself familiar with it.

@nicoodavi4114 4 года назад

Shane Sexton Hey, how did the replacement with the used part go?? I’m finally taking care of my TPMS issue and I’m trying to decide if I’d be better off with a used one. Thank you!

@nathanielpike Год назад

It will require coding.

@tommynielsen7396 5 лет назад

Thanks alot..

@shenoyglobal 5 лет назад

Where is the RDC Control UNIT on 2013 328I convertible? any info somebody can share

@YuDaMan 5 лет назад

I'm not familiar with your vehicle but I'm sure if you spend just a few minutes googling it, you can find out where it is located.

@YuDaMan 5 лет назад

based on this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-QDHCbCUgTBw.html at around 3:00, it is located either behind front right wheel or in front of rear left wheel ... I can't really tell from the diagram and I'm not at all familiar with that model.

@YuDaMan 5 лет назад

look at message #36 here: www.e90post.com/forums/showthread.php?s=ba3ed64fd5bfa26510499eb0cb9ef65e&t=1204495&page=2 it might help you although it doesn't say which rear wheel

@tetemorneoverthetop6197 4 года назад

if anyone still having this error issue and it wont go away it might just be as simple as all ur tyre pressure...had this error and I changed the rdc control box which his the module for the system, dat didn't work...after several attempts to fix it I took a drive to a a tire shop which they adjusted all four tire pressure and Bam!!!! reset the system drove off and dat was all....hope this helps someone else

@miguelpina6890 4 года назад

Where is that located bro?

@tetemorneoverthetop6197 4 года назад

@@miguelpina6890 the rdc box is in the trunk just slightly under the latch area

@miguelpina6890 4 года назад

tete morne overthetop sooo the rdc box is the one I need to replace?? Not the arena? They didn’t make it clear at the dealer they just told me I needed to replace the RDC module?

@miguelpina6890 4 года назад

tete morne overthetop this TMPS message is so annoying

@tetemorneoverthetop6197 4 года назад

@@miguelpina6890 have u tried adjusting ur air pressure in all 4 wheels yet first thou?

@duraiddlimi9032 3 года назад

&Hank you for the video but it would be a great help if you mention the fault codes you got.

@YuDaMan 3 года назад

No code reader and no codes read....just the words "TPM malfunction!" on the display.

@numaanvoraji51 2 года назад

Got a bmw 120 2014. Tmps failure comes on in warm weather. Why may that be

@ABWSKITCHEN Год назад

Because with the temperature change also the air pressure in each tire changes. Sometimes the system fails early in the morning when it's colder.

@merty2265 2 года назад

Muss man es nach dem einbauen codieren ?

@josephr.b-e8 Год назад

Has anyone been able to find a wiring schematic for this part?

@matt.108 2 года назад

I have a 2012 335i and the same thing happens will go on and off every 15 minutes sometimes it comes on for a few seconds. Sometimes a few minutes.

@mexidor24 5 лет назад

Mine had no corrosion what's so over. Anything else it could be American tires says batteries test good.

@YuDaMan 5 лет назад

I would use a meter and make sure there is continuity from the external pins to the inside circuit. It doesn't take much of a broken trace on the circuit board to create an issue. If you buy a new one I'd love the opportunity to learn more about these devices so before you toss it into the trash, let me know. I'd probably pay you $10 to ship it to me.

@YuDaMan 5 лет назад

The challenge will be the following. If you buy a used one on ebay(maybe with money back guarantee?) or a salvage yard, will the vehicle need to have programming/coding performed. I could not find a conclusive answer on the internet so please let us know your results.

@mexidor24 5 лет назад

@@YuDaMan I will try that soon. Needed to hit the road.

@mexidor24 5 лет назад

@@YuDaMan if you can repair these you may have a side business like the bmwgm5.com module repair man soldering in relays for $100 each.

@YuDaMan 5 лет назад

I've only repaired on and maybe I just got lucky. That's why I wanted to perhaps try a second one if you decide to throw yours away. Thanks

@RuNRiOt100 4 года назад

I get really confused with this, I have a 12/2010 e70 and want to upgrade my wheels. I’ve been told I don’t have TPMS valves in my year car and it’s a straight swap of wheels. Any help would be appreciated

@YuDaMan 4 года назад

look at your iDrive screen and if you have TPMS, you should see a similar picture of car with 4 wheels. If the air stems on your wheels are rubber looking, you PROBABLY don't have TPMS. The TMPS sensors normally have a very rigid stem which is mounted to the electronics INSIDE each wheel. Just google for TPMS images. Adding TMPS sensors to your new wheels WILL NOT be enough to have full monitoring and dash display.

@RuNRiOt100 4 года назад

Just had a look and on the idrive I have a car all 4 wheels are green and says active and my wheels have rubber stems

@YuDaMan 4 года назад

@@RuNRiOt100 I guess rubber stems are possible but all the ones I've seen are similar to the ones in these videos: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Maunq29ow2U.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-O9wSj0rjCdE.html

@anthonyterzo4340 Год назад

Did it work after the surgery?

@YuDaMan Год назад

yep!

@underourrock Год назад

Do you have access to the TPMS generation info for a 2011 MINI Cooper S Countryman (R60)?

@YuDaMan Год назад

sorry. I do not.

@underourrock Год назад

@@YuDaMan thank you and Merry Christmas! After I got over my laziness I went out and laid under my vehicle. I have the same controller you do. So answered my own question. Happy to share here in case it helps anyone else. Also, an extra comment doesn't hurt for the user engagement statistic. Lol. Thank you, again for your very helpful video. I always love it when people take the time to share valuable information beyond the bare minimum. Getting to see the electronics and the exact corrosion causing that problems is immensely helpful!

@pblogic007 2 года назад

Any idea what module is for the 2014 x3?

@YuDaMan 2 года назад

go to bmwfans.info and you will be able to identify every part including the module in the X3. Be sure to LIKE and subscribe if my video help you. That would really help me. THANKS!!!

@allan8524 4 года назад

How much do you think it’ll cost to get fixed

@YuDaMan 4 года назад

List price from dealer just for the module is $341 plus 1/2 hr labor if they will bill in increments of an hour. May or may not require coding and more time. Or you might be able to replace it yourself if software version and/or date code match. Easy to do if you get the right part. If you send me pic of your label, I might be willing to pay you $10 for your failed un-opened module.

@williamwilson1884 5 лет назад

What did you use to clean up the areas with corrosion???

@YuDaMan 5 лет назад

I don't recall but I probably started with alcohol and a cotton swab and if that didn't work, then probably a solvent like flux remover or electrical contact cleaner. I probably scraped a lot with my razor blade.

@williamwilson1884 5 лет назад

YuDaMan thank you! Mine is actually on the part you described was common. Do you think I will need to sauter That spot?

@YuDaMan 5 лет назад

Can't hurt to start there if you have the proper tools and technique. You do not want to overheat anything. If you are not successful and buy a new part, let me know. I'd pay you $10 plus shipping just to experiment and see if any coding is required to use a new and different part.

@vadimmartynyuk 5 лет назад

What program do you use for those diagrams and info ?

@YuDaMan 5 лет назад

I just used a video camera and took pictures of those document and diagrams. I did not create them. They came from BMW technical pages. Really, nothing fancy or complicated ...

@rosamiracle1651 5 лет назад

2017 530i having the same problem

@YuDaMan 5 лет назад

If you decide to have your old one replaced, I will pay you $10 for your old defective unit and send you a prepaid shipping label, provided it is the same part number as the video. I'm still trying to learn more about this device to be able to help others and see what other failure modes exist. thanks.

@miguelpina6890 4 года назад

Took out the rdc but it looked good no corruptions or anything... what could it be then?? This tmps is so fucking annoying 😩

@YuDaMan 4 года назад

there are batteries in each of the 4 wheel mounted transmitters. Any tire store can put their tool up to the valve stem and read the battery condition. I'd appreciate a LIKE and a SUBSCRIBE.

@miguelpina6890 4 года назад

YuDaMan took it to the dealer and they told me the 4 sensors in each tires work well but the rdc is the one that needs to be replaced..?

@SwiftGQ 3 года назад

@@miguelpina6890 Did youend up replacing the rdc?

@getitdone6694 5 лет назад

Nice informative video which made me go to the car a midnight to get the RDC and open it looking for corrosion, which I didn't find but I ended up removing solder from the 4 contacts of the connector to the board and one I lifted up with some of the green trace. I included pictures from Dropbox and you can zoom in to see the small writing or question marks. Wanted to know if I need to solder any wires to the adjacent green areas? Thanks in advance. Hope I didn't screw it up. My TPMS codes are 604E RDC system and 6059 Wheel electronics undefinedwww.dropbox.com/sh/qvg0xnz3x078ret/AABT6sDrvvH7fnXye7vBDb3Xa?dl=0

@YuDaMan 5 лет назад

Firstly, think of the green trace as simply a protective coating for the copper trace. Can you access this link: www.dropbox.com/s/4swvm7rh0fwwu5a/Test%20points%20RDC.png?dl=0 If you can, take your meter and set to resistance scale ... you should have 0 resistance green circle to green circle (looks like there might be a break where black arrow is). I would think green circle to each purple circle should be open circuit or at least VERY high resistance.

@getitdone6694 5 лет назад

Thanks so much for replying the greens show continuity but the purples show OL. If you look closely at the big contact(big solder blob) where the green dot is I see small traces going to the purple dot next to the + and the purple below the +, that whole area around the + is a continuous trace and it disconnected at the bottom where I marked the red contour I think I might have cut it with the x-acto knife trying to lift the contact after removing the solder.

@YuDaMan 5 лет назад

don't do anything ... OL mean open circuit, high resistance. I would plug it in and see if your faults are gone. Copper trace doesn't cut that easily.

@getitdone6694 5 лет назад

I am really concerned of the traces that go to the right you can clearly see them in the pictures there are 5-6 and every other contact has similar connections that show continuity.

@getitdone6694 5 лет назад

OK so I scrapped the green area around the plus+ in 3 places and it does show continuity to the green dotted contact from your pic. Just wondering if the little green lifted trace connected(at the bottom by the red line) to anything important

@def-supreme5409 3 года назад

JUST REPLACE IT....................................

@happy2help1 2 года назад

painful listening to you whine on at the rate of 3 words a minute. bore off man

@Designer_R 2 года назад

Does anyone know what is differences between this two parts: 36236771042 and 36236781846 (RDC triggers)

@YuDaMan 2 года назад

Go to BMWFans.info There is a wealth of info there and you can see what models a particular part number might be used on. If this help you, be sure to LIKE and subscribe. That will really help me! THANKS!!!!