You are awesome at explaining each step along the way. Thank you so much. Very much appreciate your smooth tone with complete explanations. Very helpful!
It is possible to pour CLR in to the pump on mine though the upper arm hose which is accessible from cabinet left of the washer. The selonoid is working but no water to top arm. If its as completely filthy as the rest of it was and probably is hopefully it will work. I'll open and close the valve manually letting cleaner get in as many areas as possible and let it sit. Bottom arm seems to work ok now, can definitely hear the water being sprayed. Going to buy clear hose, funnel, more white vinegar and CLR shortly and hope for the best. Hopefully pump is ok. Literally Only part I haven't flushed out!
After watching this video I noticed your motor turned freely and mine didn’t.. so I used my screw driver to kinda help it turn and after a few turns it loosened up and I was able to turn it with my hand like you did. I put everything back together and hoped for the best.. well it works now! Thank you!
I get my parts locally. You may be able to see if the place I get my parts will ship. I hope this helps. www.google.com/search?gs_ssp=eJzj4tZP1zcsSSvMNTXPNmC0UjWosLBIsTQwTjFOszBJMk80NbQyqDAyTTZJsjRKTLRMMjUwsbDw4s_NTMzNVEgsKMjJTMxLTgUAo8cUUg&q=miami+appliance&oq=Miami+app&aqs=chrome.1.0i355j46i175i199l3j0i457.4993j0j7&client=ms-android-motorola-rev2&sourceid=chrome-mobile&ie=UTF-8
The orientation of the filter shown in this video didn't seem to need to be placed a certain way. After I set it in place I kinda turned it a bit and it sat where it fit in. Your model may need a specific orientation. I don't think you can mess up the placement however if you really want to make sure you may want to search for images of your model and see if you can find a picture of the inside with everything installed. I hope this helps.
You could try removing the upper spray arm, run the system and see if any water sprays down. If it does the spray arm could be clogged. If it doesn't the inlet to the spray arm could be clogged.
@@aridgerat I've been looking for something similar to the issue your having but couldn't find anything. I don't know enough to tell you exactly what the issue is. The water should be directed to the top arm by the impeller and the orientation of the circular screen assembly. Maybe double check that everything is seated properly.
I'm having the same problem. I ran the system outside of the counter and the water makes is almost to the top but does not fully pump water unless I bang on the line going to the top. My only assumption is that the pump is just not strong enough, (maybe worn impeller)