FIX HACK DIY : Preventing Yellow Flames (Gas Stove Series 3/3) 

My heartfelt Appreciation & Gratitude for your educational video on this topic 🙏 We have been using different types of gas stoves for the past 5 years and each time the flame turned yellow, I tried looking for service/repair but no one seems to be interested. We finally invested in Rinnai double gas stove (supposedly a very reliable brand) but the same problem occurred after around 1 year. The thought of changing another gas stove (costing a couple of hundred RM) can be a pinch in the wallet! We had tried adjusting the air-flow valve but to no avail. Today after watching your video, I was determined to give it one last try before purchasing another unit. I tried cleaning the air-flow steel conduit but still uneventful result. So, my last resort, I flushed it with water (after noticing there was an open outlet).... the water discharged was slightly brownish, and after another 2 rounds of flushing... the discharge was clear. Then, Voila!.... the flame returned to normal blue, without yellow flames! Thank YOU once again for helping us SAVE money and educating us on DIY matters 👍

Yellow is unburned gas because of not enough air. Needing a cleaning/spider webs can cause this low air mixing in the piping so maybe clean first before adjusting a previously adjusted unit. Jumping off the burner or blowing out blue flames is too much gas.

Thanks, this will help me to adjust my wifes simple gas burner. Now I understand the basics about gas burner.

After following your video guide, found the air adjuster and adjusted the flame. Say bye bye to black bottom pots and noticing that soup boils slightly faster. I guess it is much more efficient now.

Thanks Mr. Johnson Lam for your patience in answering my questions when we met in Mr. DIY at Mid Valley. You are so patient, professional and friendly. I can now DIY my stove and Aircond cleaning in minutes 😊

What if my gas stove is a simple model that doesn't have those adjusting levers?

This is what I’m looking for. Clear and informative. 🙏 thanks

Thank you so much for sharing. Much appreciated. I have tried this on my two plate gas burner which had a yellow flame and after adjusting it gave a beautiful blue flame again.

most stoves dont have the air adjust lever like shown. I have never seen a stove with air lever like that in the last 3 sets of stove I overhauled

RU-vid.... Priceless! Thank you so much!

Thank you so much for this info. Very helpful!❤

Hi, my outer burner doesn't change after tuning the air valve. The flame is similar to a lighter flame, can you provide any tips to solve this issue? I've tried removing the outer burner cover and clean the inside and doesn't work too

I am off to do some adjustment….thank you for the tip.

My problem is , if I open one , the other side pressure gets low or worse it’ll cut off . Its like the gas pressure is low is both are on . How do I fix this

This is so cool! Thanks this really helped!

Hello I got a GE is any one know how do I fixed the yellow burned my stove doesn't have does any help please

Hey, I have tried this but there is still yellow flame in only on one part. How do I solve this?

0:52 very helpful

And it's called Light duty gas stove like those of catering companies use And our gas stove is burning yellow and stooing and leaving black marks from the pots and else wear Is any way to clean up this

Super helpful. Thank you! 😊

did you say the the adjustments are UNDER the stove?

very helpfull .Thank you

Can we learn how to remove a stuck gas burner base and fire cover?

Hi. Good and simple video to understand. Thanks. I tried to adjust the lever. But all 4 adjustment probes are not moveable at all. Do I need to use tools or try spraying WD40 assuming it’s stuck?

Mine doesn't have this setup

Thank you so much for the help and knowledge 😘

I find your videos very useful tnx..im your new follower

A gas stove with a rubber pipe and an improvised fitting inside that rubber pipe to make it fit on to an fitting that is then clamped on with a hose clamp?? Seriously first of all those clamps are not safe as they break. Second a rubber pipe that can melt? And on top of that another rubber hose to make that outside hose smaller to it fits onto an fitting? Maybe u should make a video on this one and how unsafe it is to do this kind of thing.

also my inner burner is low flame, i need to kipas abit to make outer burner light up

Gigantic thanks Sir 😊

Hi I have Samsung NX60T8111SS model and has serious orange flame coming out I tried look for adjustment in the back but this model doesn’t have I don’t know where is located is ?

is this adjustment also in outdoor stand alone stoves?

My bottom burner is no producing any fire. When i fire off, top burner will spark n burn. When i use bigger flame, bottom burner will produce short yellow fire then died off. But i still can hear gas is coming out.

I bought a brilliant cooker I like it because I can sit a wok in it and it has large and single burning flames I already took the first one back because when I turn it on the flames comes out on the each side. Big flames. How can I disconnect the igniter so as to only use lighter or matches.

Hi, I'm from the UK; my gas hob is burning with the correct blue flame, but tonight it started to have an unusual smell. (It is Not rotten eggs) It is like it was burning a more crude type of gas...all four burners are the same. Have you any suggestions ? Thanks.

My rinnai stove model is RB-2myg n the fire is orange, cant seem to fix it, pls help

Thanks brother

Thank you, will try it.

This was super helpful. Thank you!

the other side of my stove works as i tune it as you suggested. but the other side doesnt. i dont know whats going on. please help me

Thank you for this good video

Hi, what if it's the middle small burner for a 3 burner stove? It doesn't have those adjustment levers

thanks

Thanks man!!

my guy ive been searching this type of guide all over the internet, all stove is like American one

Thank you so much. Very very helpful

Satu tungku tidak menyala merk niko reflesion phantom tanpa pematik ❤🙏

How do you adjust burner flame

hi..by any chance do u know where is the lever for bosch stove? can't seem to locate it.

'Gas Stove' can mean any 'gas stove' . Most don't have adjustments!

Thank you so very much

Is it a good idea to turn the air hole fully open?

I've got an old gas stove which doesn't have any switches or controls but it's usually switche on control the heat on how high or low you want 🤔 It's just ab old gas stove with bars and stove and gas pipe I don't know if you heard of this one before

Question sir. My gas stove seems like its making letup letup sound... and the fire just get stronger. Any recommendations fix ? Sounds like moto ekzos letup but not as loud la of coz

Is yellow flame more or less oxygen?

mantap

Great video. Could you advise us the brand of the gas stove you are using ?😊

Omg to late I threw mine😢

YA!SO COOL!BUT 1 CYLINDER OF GAS CAN DISTROY A 7 FLOOR BUILDING! SO CALL A TECHNICIAN!

Why do you love comments and not reply?

Tarak jumpa pun

The majority of stoves don't have those levers,make a proper video.

this is how to make carbon-monoxide! you should never mess around like this guys doing.you need special tools to set things like this up.