Fix or Replace Lower Door Trim Molding 2017-2023 Honda CR-V. Repairing Broken Plastic Car Parts. 

*Tools & Supplies Used* Epoxy Glue JB Weld- amzn.to/2LEq9nX Trim Adhesive Tape- amzn.to/2K0ucG6 Trim Panel Tools- amzn.to/2NITvPe 170 Piece Mechanics Tool Set- amzn.to/2xoyu5c Safety Glasses- amzn.to/2ez41Jw Respirator Masks N95- amzn.to/2xX32x3 Mechanic Gloves- amzn.to/2w0i1SP Nitrile Disposable Gloves Large- amzn.to/2w0dlwc *Thanks for Watching! Help Support the Channel by Subscribing & Clicking the BELL Icon for all NEW Videos!*

You can also remove the clips without tools by pushing them to the side and then turning them 90 degrees up. They’ll come right out.

This saved me hundreds of dollars that the dealer wanted to charge me! Thanks for the clear instructions- you are a lifesaver!

I just saw VDO and I got problem too. My passenger door seal came off plus can hear wear click click sound when I am driving 😢

Thank you for this!!! My panel had come clean off, I was able to reattach it in under 5 minutes thanks to you!!

Pro tip remove rubber grommet from door then remove screw in panel to experience the slide off effect

2019 CR-V, I can't believe how bad a design the doors are. My passenger side (Australia) both doors have this problem. A lot of the white clips are broken. Lucky to get them on E-bay. Your video has helped a lot.

FWIW looks like the 2014 uses the same system. Thanks for your video!

Hey Jonny do you have an email address so I can send you some pics of this 2009 Chevy Traverse that needs some lower rocker panels on the right side and the part on the door which is called the side trim strip. I am looking for those brand new parts so I can order them online if not go to a junk yard

Good video- only one out there describing the crappy, weak Honda clip holders in the side mouldings. My 2013 is similar with double stick tape and clips that look like they should slide sideways (but break!) I just used 3M or Permatex weather strip adhesive (black) to fix the end of mine.

Thanks!

Can lower trim be bought separately ? I rashed mine on a curb

JD: Your video was a life (and $) saver. I got a kit with all the tools to make the repair expecting to take a few hours, I even ordered the double sided tape from your link. Usually you find complications and what looks like an easy job becomes and ordeal. Unlike you but after seeing your video, I pulled the bottom middle of the molding to separate the non-sliding guide from the 2021 CRV door frame. I was hoping to slide the molding sideways while keeping the guide out. After ungluing the bottom side edge I decided to just try to snap the molding back in. This worked for me, IMHO a miracle, Halleujah! BTW, when this molding first unsnapped, I tried to pound it back in but it didn't work. Two suggestions: do this on a hot day so that the plastic molding is more flexible to avoid cracking it, and start from the bottom to work the guide out first. Thank you! I and could not have done this without your video. I agree, this is a bad design and a money maker for Honda and the dealers.

So you have to wait for the glue to cure for 24 hours before you can apply it back on?

Do you know what kind of weather strip is on the door that you connected to the panel? I am looking for a replacement for that, but am only finding the kind that goes on the around the whole door frame

would this be similar to the repair on a 2014 crv? I've checked a few places and I see a few others mentioning this problem but the help (outside of this video) is not out there.

What does lower body trim do? Is it worth it to install on my '22 Passport? Nice video, btw.

Thank you sooo much for this video. I was able to repair and place my panel back on! Clips/fasteners that fit 2017 Honda CRV are QT278 by Oautoo Top head size 12mmx15mm Bottom head size 14mm x 20mm Stem length 10mm

Does anyone know where I can buy these clips for 2019 crv?

Anyone have a video on this for Pilot?

Great video! Very cool! THANK YOU!

Replacement pilar dashboard

Marvelous explanation for each step. Thank you!

Is there any way to prevent from ripping it off in the first place?

My Crz has similar problem except it's rocker panel mouldings, the car is so low that it amazing clips were not designed for clips to give rather than break moulding. I hope epoxy working term, thanks for video

А где 3м скоч

This video helped me a lot, thanks. Greetings from Finland ✌️

Can anyone verify the part number/type for this? I need to replace the Driver side rear passenger trim and want to make sure I have the correct product details before ordering it online.

Good job thanks for the info very helpful.

This is very helpful. Thank you for sharing!🤘

What are those white clips holding the panel called?

Is there one for 2012 to 2016 models

Te faltó pegar la cinta adhesiva

Thanks

Was anyone able to find any video(s) for replacing the cladding on the rear passenger door?

I need a video on rav4 hybrid 2021. There is a screw I can’t figure out

can you get the door trim on any websites?

Anyone know where I can get new clips?

Garnish Assembly, R Rear Door (Lower) $53.04 Part # 75313-TLC-A01 Garnish Assembly, R Front Door (Lower) $75.34 Part # 75312-TLC-A01 Are these the part numbers? they are very hard to find out

Thank you

Great video!

Where can I find the lower OEM moldings? Unfortunately my wife scratched it pretty bad and we need new ones. Thanks guys