Тёмный

Fix Power Window motor Ford Club Wagon VAN 

Foxboss9
Подписаться 57 тыс.
Просмотров 24 тыс.
50% 1

BUY Complete motor HERE -- amzn.to/2sMhfeo
BUY gear replacement HERE -- amzn.to/2sM1Xq1
This video show you roughly what it would take to put new gears in the window motors of a Ford product anything from really the 1980s up until the late 90s so from 1982 up to 1997 this would work in the E-150 and also the Club Wagon Vans also of course the F-series pickup which would be the F150 F250 F350. And quite a few others now I do show how to reinstall the regulator and motor back into this 1988 Club Wagon Econoline van because that's specifically what I was working on but this is really to show you how you can replace the gears and not replace a good working motor to save yourself some money. This will allow your windows to start going back up and down again with smoothness. So if you're window has stopped going up and down on your Ford product but you can still hear the motor running then most likely you need this fix

Опубликовано:

 

7 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 37   
@dave1135
@dave1135 7 лет назад
in place of the push washers, I've made my own out of plastic from a milk jug, just drill a hole one size smaller than the bolt and thread it on
@Foxboss9
@Foxboss9 7 лет назад
Your Tip gets the Loved comment!! and Pinned to the top.. Great job!!
@hotrodrebel855
@hotrodrebel855 3 года назад
Great idea!!
@adamharlow8124
@adamharlow8124 Год назад
this guy should charge money for this video. thanks SO much for the video.
@gizzyguzzi
@gizzyguzzi Год назад
I did this on one side. It kinda sucked. When I did the second one I left the regulator in the van. Don't drill thr rivets out. Drill 3 1/2" holes to remove the bolts that hold the motor. Mine did not have dimples where the holes go, but I used step drills and was able to 'wallow' the holes to match the bolts. It came out pretty clean and much time saved.
@mobilemike8500
@mobilemike8500 2 года назад
Just so you know there's usually dimples in the door if not you can figure out where the bolts are in the motor drill half inch holes remove the motor without taking out the regulator way easier that way I've done hundreds of them
@havevanmusttravel
@havevanmusttravel 5 лет назад
Nice job! I have a 1995 Ford E-250 Van that needs this exact repair and I found this video extremely helpful. Thanks for posting!
@hotrodrebel855
@hotrodrebel855 3 года назад
8-3-21 and this is still a very informative video. Thanks for the help. mine went smooth after watching this!
@jusken7853
@jusken7853 5 лет назад
Hey-Great how to. Just did mine with a low cost motor with your help. Had I seen your video before buying the motor, I'd have rebuilt mine. The aftermarket one is less than half the size of the OEM. I'll still rebuild the original for a spare. Thanks
@Foxboss9
@Foxboss9 5 лет назад
👍😁
@esmith836
@esmith836 7 лет назад
Great job! That Ford van sure is a very clean. I have done a lot of window regulators and I have to explain those cuts on my forearm and wrists lol! That's really cool you can get all the replacement parts and still use the original window motor.
@Foxboss9
@Foxboss9 7 лет назад
😊
@gizzyguzzi
@gizzyguzzi 4 года назад
Just takes a little patience. And some sticking out of the tongue! Thanks for the tips. Big help!
@surffeen
@surffeen 4 года назад
In the tutorial you say you used 1 3/4" bolts Did you mean 3/4"? I'm thinking of getting 1/2" Nice video thanks for the help!
@Foxboss9
@Foxboss9 4 года назад
No, those bolts in the video were 1-3/4 long before I cut them off..
@darrellwampler6473
@darrellwampler6473 7 лет назад
Yeah Test it before installing the door panels etc. Nice job.
@Foxboss9
@Foxboss9 7 лет назад
Darrell Wampler 👍😁
@davidwebb784
@davidwebb784 6 лет назад
Nice video, I would like to see the whole process , even when you drill out the rivets.. Also an idea of where the track is on the regulator, thanks
@davidwebb784
@davidwebb784 6 лет назад
motor clicks but does not engage what do you think the problem is?
@jamesknox955
@jamesknox955 6 лет назад
Thank you very much for your help, it was helpful and got the job done.
@Foxboss9
@Foxboss9 6 лет назад
James Knox 👍😁
@jamesknox955
@jamesknox955 6 лет назад
Thank you very much for your help, it was helpful and got the job done
@glentrick
@glentrick Год назад
Very well done thank you
@Ccrippie
@Ccrippie 3 месяца назад
Thank you
@robertsitch1415
@robertsitch1415 7 лет назад
I kind of wonder why they would use plastic gears since they are probably less durable than brass, possibly it saves the manufacturer money.
@Foxboss9
@Foxboss9 7 лет назад
Robert Sitch it's supposed to be a sacrificial piece to save the more expensive motor from damage... But mainly cost.. remember They were using nylon gears on the engines timing gears too!
@RobertoSantiagoRodriguez
@RobertoSantiagoRodriguez 6 лет назад
Safety, that is why. If someone gets an arm or their head stuck in the window path, the plastic will be crushed and the motor will just free wheel instead of harming the person, pet or what have you. Also will keep motor from overheating and catching fire. 😁
@kspanks04
@kspanks04 5 лет назад
I don't hear anything when I hit the switch, my window is stuck down and with the panel off I can't force it up to get it out of the way!
@rstormo68
@rstormo68 7 лет назад
Would rivets work here? Interesting job 😀
@Foxboss9
@Foxboss9 7 лет назад
Yes But BIG Ones
@Foxboss9
@Foxboss9 7 лет назад
The drilled out hole size is about 5/16"
@rstormo68
@rstormo68 7 лет назад
Nice to see parts that are serviceable !
@ericduchesnil7975
@ericduchesnil7975 5 лет назад
Thks Man!
@Foxboss9
@Foxboss9 5 лет назад
👍😁
@MrSteveieM
@MrSteveieM 7 лет назад
Nice👍
@Foxboss9
@Foxboss9 7 лет назад
👍😁
@ramsayreid
@ramsayreid Год назад
Thanks
Далее
🛑 ты за кого?
00:11
Просмотров 39 тыс.
Modus males sekolah
00:14
Просмотров 10 млн
How to repair the window motor on a '90 F-250
29:38
Просмотров 10 тыс.
How To Fix A Ford Power Window Motor For Free!
8:14
Просмотров 324 тыс.