This video show you how to Clean your Dyson vacuum cleaner to stop bad smells during vacumm.
Tool needed:
No. 8 and No 15 Torx screwdrivers
Flat screw driver
Cannot emphasize enough.....
1. Note where all the rubber rings and foam gaskets go
2. Do not overtighten screws. Tighten to finger tight only
3. Reassemble when it is all bone dry
4. DO NOT PRY.... slip the flat blade screwdriver and slide it along
( see video)
DISCLAIMER:
This will most likely invalidate your warranty
14 окт 2024