No video :(

DEEP CLEANING DYSON BIG BALL VACUUM

Подписаться 49 тыс.

Просмотров 33 тыс.

50% 1

please like this video :)
Facebook: / ghostlyrich
Vacuum was starting to get weaker so i show how to take apart the vacuum and clean it out thoroughly i think this is considered the cineball big ball vacuum. All in all no to bad to take apart and clean and will make your vacuum work like new again.

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 27

@ramosfurtado5313 3 месяца назад

Hi ghostlyrich, great demonstration and detailed. It surely gets a bit difficult with one hand holding the phone. Only one suggestion is, it is worthwhile opening the motor section as there is a filter in there that Dyson does not mention.

@teelin7746 11 месяцев назад

Great video! Thanks so much. This video was hard work for you to make so we appreciate you for sharing ❤

@FknNefFy Месяц назад

Thanks so much! You saved me a lot of figuring out time and deciding if it was worth it or not and it doesn't seem that hard. 😁👍🏼

@normanhou 4 месяца назад

Awesome, I follow your steps clear my big wheel very well.

@tupuhumuhumunukunukuapuaa3093 10 месяцев назад

Have this model in the closet and it got heavy use before we got the two uprights. It's years old. Will need to do the deeeeep clean. Thanks for posting!

@todrichard5349 Год назад

I'm stuck at 6:25. I wish I could get a better picture of how you got that clip off. Great video, for sure!!

@ghostlyrich Год назад

It’s a super tricky one. I’m sure you already got it, but you have to separate the sides there a little bit will pushing the button then it’s why I was having such a trouble showing it even if I were to put on a tripod which I tried as well. It just couldn’t get a good angle on it.

@kimmysueb 2 месяца назад

What type and sizes of screwdrivers were needed to take it all apart? Thanks for the video!

@brendaraudebaugh6246 9 месяцев назад

Great job Thank you 😊

@925209 2 месяца назад

What tool do u use to take off the first layer?

@jeroentabor4760 9 месяцев назад

The cyclones already failed you should deep clean the motor cause there is dirt on the motor inlet in Europe we have the second generation bigball Cinetic its 3 years old and still running strong

@kemeremir 3 месяца назад

cheers bro ,much abliged .

@julieeves283 Год назад

THANK YOU so very much for this video! ❤😂

@scottharrison2523 8 месяцев назад

Hi, so is it a t9 bit for all the screws/bolts?

@yufeichang2637 Год назад

actually, he is on the right way. But the hardest part is not removing the red buckle, but removing the tongue and the 2 screws under it. I managed to remove the red buckle but not able to remove the blue tongue.

@bolettejensen9354 Год назад

Wow this looks like something I would totally crew-up. Once I cleaned the house of an old man. Used my own vacuum cleaner. It still stinks of the old dog the guy had - when I use it. Would this fix the dog smell? I don't own a dog but it smells like dog when I'm done cleaning.

@ghostlyrich Год назад

This should help id also clean it with a strong detergent to kill the odors from the pet dander that are soaked in be sure to clean all attachments and hose thoroughly as well

@bolettejensen9354 Год назад

@@ghostlyrich Thank you for answering. How do I clean the hose and the tube?

@wertbe1718 Год назад

Why did they make this so complex

@djohnsnz Год назад

There is a pre moter filter inside the base unit that you can replace also

@ZERG81 Год назад

how do u get to it ? the lower unit seems sealed

@redbackspida2517 9 месяцев назад

I have been searching for a video/instructions that shows how to get to the 'pre-motor' filter. I was hoping it would become visible when the top of the assembly was removed (starting at 6.23 mins). Is it possible to get to the first filter this way @ghostlyrich? Cheers! PS. Just found this response from a query to Dyson ". . . the dust and dirt is separated from the air into the bin, without the need for a washable filter. The machine has a post-motor filter which is there to capture carbon dust from the motor however is designed to last the lifetime of the machine without the need to wash/replace it". There may not be a 'pre-motor' filter depending on the model.

@djohnsnz 9 месяцев назад

@@ZERG81 Sorry just saw your reply... There is about 8-10 screws that your need to undo to get the unit inhalf. You also need to take the caps off the wheels.

@djohnsnz 9 месяцев назад

@@redbackspida2517 The pre motor filter is not on the top end of that @ghostlyrich is cleaning. It is located in the lower unit with the motor.

@yufeichang2637 Год назад

6:25 you broke the red piece...-_-!

@ghostlyrich Год назад

Still works haha

@FknNefFy Год назад

Tripod