Ticking tremolo (vibrato) is a common problem on vintage Fender amplifiers, especially from the CBS Silverface era. In this video we'll show how to completely cure the common ticking problem in Fender amps by following an old service bulletin called "Service Bulletin #9". The fix involves a mixture of changing the lead dress to route wires away from other signal and voltage carrying wires, and adding a .01 capacitor across the 10M resistor in the vibrato circuit. Enjoy the video! Hopefully this will help someone.
FENDER SERVICE BULLETIN #9
The official Fender solution
The ticking caused by the Vibrato is caused by improper lead dress.
It can almost be “cured” by connecting a .01 mfd 600 volt mylar capacitor
on the 10 meg ohm resistor in the vibrato circuit. this resistor is located
on the parts panel. Remove capacitor across the 10 meg ohm resistor (old
modification) if in place. (That is, run the cap from the junction of the 10 meg resistor and the
optoisolator to ground.)
If this does not produce the desired results, then the leads should be
dressed as follows and excessive lengths shortened.
1. Dress the leads to the vibrato speed and intensity controls away from
the tone controls and filter leads.
2. “Bunch” the leads to the components on the parts panel which connect to
the tube socket of the 7025 (12AX7) vibrato tube.
------------------------------
Save 10% on Native Sons Straps with this code: GUITOLOGIST10 www.nativesons...
GUITOLOGIST MERCH: teespring.com/...
SUBSCRIBE TO CHANNEL 2: bit.ly/Guitolog...
----------------------------------------------------------
SHOW YOUR SUPPORT
1: Donate via Paypal: paypal.me/guit...
2: Buy Merch: teespring.com/...
3: Send in Viewer Mail. (Contact Me for details at bradlinzy@gmail.com )
4: Purchase an ad! (Rate sheets available upon request at email above.)
5: Buy something from a sponsor and tell them I sent you.
6: Stand in the middle of the street naked screaming "LONG LIVE THE GUITOLOGIST!" Then when the cops arrive, tell them about my channel.
------------------------------------------------------------
♠STUFF I USE
-5A Variac: amzn.to/2FNWthU
-Jameco Isolation Transformer: amzn.to/2PRv1Fa
-Fluke 87: amzn.to/2DwHjvr
-Yotec 936 Soldering Station: bit.ly/2JqB1Vw
-Sealody SSA51 soldering station: amzn.to/2DJTS7P
-Black and Decker Heat Gun: amzn.to/2DWpDhr
-Geekcreit® LCR-T4 Mega328 Transistor Tester bit.ly/2J9uLSA
-HT02 Handheld Infrared Thermal Camera bit.ly/2LXfLoD
-Solderless Breadboard: bit.ly/2stkVAq
-Breadboard Jumper Wires: bit.ly/2JowaEh
-Geekcreit® XR2206 Function Signal Generator DIY Kit bit.ly/2LYBvkb
-Contact Cleaner: amzn.to/2FVitro
-Max Professional Cleaner and Lubricant: amzn.to/37R3JY8
-Deoxit Fader Cleaner: amzn.to/2LPwtsE
♠RECORDING
-JVC Everio Camcorder amzn.to/2RLIleU
-Andonstar USB Microscope: bit.ly/2q8QIWz
-Articulated Boom Arm with Cam Mount: amzn.to/2Hlo2AX
-Shure Beta 87A amzn.to/2rNPnoW
-EV 635A Omnidirectional Dynamic Mic amzn.to/2pR8HQT
♠RECOMMENDED BOOKS
-RCA TUBE MANUAL amzn.to/2GOBVqS
-DESIGN AND CONSTRUCTION OF TUBE AMPLIFIERS: amzn.to/2HSNMne
-Designing Tube Preamps for Guitar and Bass: amzn.to/2DK5tmt
♠2006 FENDER AMERICAN STD TELECASTER PICKUPS
-TV Jones Magnatron Neck: amzn.to/2q1zQjD
-Seymour Duncan Vintage Stacked Bridge: amzn.to/2GyZjrK
7 сен 2024
