Good content kabayan, will do this and I do really like your style, which lacks in most Filipino RU-vidrs, "Professional". Hindi mo nginungudngod mukha mo sa screen, malikot ang kamay na parang ma epilepsy, walang kabalbalan vfx/sfx at nakakabwist na 100x na pagsasabi ng "guys". Will follow your futures contents, thanks!
@@ThinkFrugal I have MXQ Pro 5g 4k android. It came with Android11.1 4gb 32gb which I am sure are fake specifications. It was extremely slow and the internal storage setting was greyed meaning that you could not open to explore it. Upon opening the case, I found out that it has an MXQPRO_V73 2021-06-19 board and an RK3128H processor under the heat sink. However, the CPUX app showed it has rk3066 and the recovery menu indicates it comes with RK322X. I can only connect it to the computer in maskrom mode and most of the RK3229 firmwares( loader v2.37) flash successfully but won't boot( including the one that you have provided in the link above).Do you have a solution for this problem?Thank you.
Salute to you boss. napaka ganda at linaw ng explanation. Na upgrade ko na yung firmware ngbsa akin saka napaka smooth. unlike nung previous FW niya mabilis pa tumakbo yung lumpo 🤣🤣🤣
There's a lot of these MX Q Pro boxes being fixed on YT ...... if you see them listed on ebay they are for a couple of bucks. Good enough reason to stay well clear.
Yay, I have one, a scammed one, with one gig of RAM and RTL8189 Wifi. Seams I don't have lucky these time with searching for new firmware. Any suggestions?
pano nyo po napagana yung wifi? hindi kasi nag aappear wifi sakin , same rom sa video ang ginamit ko, ok naman sya, kaso walang nade detect na wifi. ang rom at wifi ko ay same sa inyo
Hello, paano nyo pi napagana? Gagana lang yung internet sa akin after reflash ng firmware pero kapag nirestart or nireset ko na yung device. Ayaw na mag connect.
Thanks for the help, it was well paced and clear.. and the apps/software links delivered quickly.... but... the main item, the Firmware, refused to unzip / unpack ...
I did everything as in the video, but when I turn it on, the red light comes on and after a while there is a blue lamp but still no picture, does it take a long time to throw the picture on the tv or what?
it is working really much better than before flashing, the only problem is that even with lan cable connected only gives me 10 mbps of lan speed, i have 100 mbps...
thank you! the firmware upgrade worked. HOWEVER, when the video plays, there is a screeching noise and then the box either freezes, or restarts. would others have the same problem?
Thanks to you! I just got one...had audio problem. Tried getting help with the seller from lazada but did not get anything. I tried checking the details and Damn...I got a fake one!!!
Bro we have the same chip info which is RK322A But everytime i am flashing it says like this Test Device Start Test Device Success Check Chip Start Check Chip Fail in all Red Hope you can help me
Same problem. I am using lan and it is faster than wifi but there are time I wanted to bring the box away from the internet router however the wifi isn't working.
With research conducted and finding a lot of these Chinese boxes come with malware on the firmware, how can we be sure that downloaded firmware doesnt also have the same issue?
What if Wifi in Device Info HW app says SSV6X5X, Will it work? or is there a problem with that? Can it brick the tv box? Please I'd appreciate you confirm ASAP...
Open up your android box, and you will see your board model number printed on the PCB. Please use that to search for a compatible rom from the given links in the video description. Here is an example on how you can find your board model number: drive.google.com/file/d/1YFvX8xaUtRGkg_ZTjshOwet3j-UYQ1K_/view?usp=sharing
Device not found or load on RKdev tool. If plug power cable then it shows found one loader device. Why not found on RKdev tool via hdmi with male to male cable
Hello Sir Its fake box, not know to me, but nicely printed stating 2GB RAM and 16GB Storage with MBOX MXQ PRO 5G 4K. I BROUGHT recently with device not working/booting, with no TV display and blue LED light is ON permanently. MBOX PERMANENTLY BRICKED MAY BE WRONG FIRMWARE APPLIED AS NEVER TOOK DEVICE BACKUP, Android version 11.1 its a fake with RAM 2048MB AND INTERNAL STORAGE 4.00GB with reset option permanently disabled. PCB DETEAILS AS MXQ-RK3128, MALI-400MP PCB REVISION V1.4-20211104, Processor RK 3128 with WIFI RK915. My laptop with USB does not detect MBox using external Reset toothpick or through USB driver using RKTool /Android Tool . I need to restore Device as it is booting through external SD card, but with configuration error and unable to mount volumes. Please suggest How to make a SD card image (suggest tool name and firmware image details) to restore MBOX device. I liked all your videos, but no video states how to recover the faulty device using SD card (Tcard with 8GB) to restore the device. Please suggest MBOX device firmware download link with SD Card Boot options to recover the device. Thanks in advance for your good work here to support MBOX usages.
Cant work.. Device Info.. how to fit it.. it think Android version is lower.. but in about Device.. it Said Android Version 11 but when i installed CPU Z it said Android 5 Version.
Hello friend, greetings, a question, I have the mxq pro 4k 5g but my device shows google tv box and on ethernet I get ac300, where could I look for firmwares, thank you
Hello, i flash the firmware and it stuck at the white android boot screen, it bootloop, i have the exact same Spec as yours, my tv box is dead, bricked. Rockchip android tool wont detect it on my pc too. Help!
I wanna know. is the "Other ROM" compatible with this media box? or have you officially tried it? since i have the exact same MXQ Pro like the one you using, same CPU and Wi-Fi Chip.
Hi have a great day! I have the MXQ RK3229 and the ESP8089. The reset button does not enter recovery mode and does not allow the use of a USB burning tool. However, the computer does not identify the TV box since the reset button is not functioning properly. When I plug in and hold the reset button, the TV box lights up blue, but nothing happens on the computer. When I plug in to the television, no signal appears. Is it possible that the operating system has been lost? What should I do? Please I need help.
I have a tv98 android stick with Rockchip RK3228A and AP6335 wifi. The firmware is shocking and full of bloatware. Any help with a quick fresh, clean firmware would be appreciated. Thanks
How to flash HK1 rbox D8 with rk3528? The tool don't want to load the img file. Device is stuck at loop, i need to re-flasht it but with a working tool.. Can you help me please?
Question about this. Does this make the device show its actual specification or does the firmware still spoof the device's info like the android version it runs?
i did it and after i finished when i tried to connect it it does not turn on with no blue or red light..no light at all as it has no power...help please how can i fix it after it bricked ..i know you're free of responsibility but please help
Dude, you need to chill out a bit... Step 1: First, you need to relax Step 2: Read the Title of the video Step 3: Toggle the English subtitle Step 4: In case you have not figured it out yet, go back to Step 1
hello,i have the same tv box,i try to fix with this method but, i have problem with the android tool,i try all the version,but nothing,can you help me please? thank you!!!
Mine starts up. Just wont accept my wifi password.😢😢😢. I tried the power cord in my old smart box, which now works again. Will watch your video to see if i can fix. How old arese when i tried to ser dat the range went from 1970 - 1993. THATS OLD. I know the internet would update, that was my first red flag there was a problem. 😢😢😢😢
Hi Sir, I am from Sri Lanka. I have model gxt-dongle-3188 TV stick. Manufacture- rockchip. Android.4.2.2. I tried flash firmware but device now death. Can you help me resolve this problem. If possible give me a correct firmware site for my unit. Thanks.
I was hoping to follow your guide. But unfortunately I purchased one cheap off ebay. Listing was exactly as yours but the Device info showed. Rockchip rk3128 and wifi as Rk915. Also it was listed as 8Gb but in the memory section it shows 2Gb. I contacted the seller before I received it. To inquire about how the USB ports were white. And ever one I have seen was black. Of course they didn't respond to my message until the day the item was delivered 😔
Quisiera saber porqué no se me actualizan la fecha y la hora cuando enciendo mi TV y el TVBOX. Casi siempre debo actualizarlas manualmente, lo cual es incómodo.
Hello friends, greetings, good video. I have a question, I followed all the steps but the TVbox gives me an error. It appears in red letters. like this. wait for Maskrom fail could you help me please I would really appreciate it. Greetings
hey bro, I just opened my tv box and found out that is the RK3228A, almost the same as yours. The only difference is the color of the board xd. But I can not do a backup with your other video. The CMD throw me an error about the copy of the Kernel.img. Any help? Thank you for the video btw, I would like to do it, once I backed up my device.
thanks for you guide, I've managed to install new firmware but after installing it, whenever I press anything on the remote screen goes black for a second, is this the new firmware failure or anything?