Hi there, my angel eyes just stopped working when the light switch is the 1st position. But they come on when moved to the 2nd position with the low beams! Any ideas? Thanks
Likely you’ll need to turn them on as day time running lights using coding. Use Carly or similar BMW coding softwares with the appropriate dongle and you can activate the angel eyes as day time running lights. If they worked before, you may have hit the max fail counter for angel eyes (basically the frm thinks the lights are burning out). You can also reset this counter using protool and then your angel eyes should come back on.
@@6ixgarage thanks for this. I tried that on my Carly, but no luck . I didn’t get to check the drivers side bulb but the passenger one definitely works. The lights are only 1 year old and are Valeo units. The car is a 2008 pre LCI one but fitted with LCI lights front and rear. Bulbs in them are the original halogen type that came with the headlights. It also comes up with the dreaded fault codes of A8AC and A8AD. I have a launch diagnostic tester too which will allow the short cut reset I read about but it doesn’t say complete or anything once activated. My Carly doesn’t have this option
I’m uncertain on that because when I purchased the tool, it didn’t have the two options. I would reach out to them directly, they also have a Facebook group so you can ask questions.