Тёмный

Fixing a Bobcat 773 Skid-steer Loader: Fuel System and Electrical Problems 

Quick Speed Shop
Подписаться 21 тыс.
Просмотров 22 тыс.
50% 1

Опубликовано:

 

28 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 24   
@chriscadman5715
@chriscadman5715 2 года назад
Thanx for the visuals on the main fuel supply line. A visual beats a paper manual any day of the week. Ouch! I knew you were gonna snap the lug stud. Been there, done that! Anyway, thanx for the visuals, b/c it made the job easy.
@stevierudy5022
@stevierudy5022 3 года назад
Mountain Dew, your second fav beverage!! Good Luck with the CAT on your next project.
@QuickSpeedShop
@QuickSpeedShop 3 года назад
Gas and Diesel are my first two fav beverages
@stevierudy5022
@stevierudy5022 3 года назад
For Sure!!!
@jamesbailey7785
@jamesbailey7785 3 месяца назад
Good vid young man:))). I'm sure some one mentioned the original fuel line probably ok as the first problem was the pick up tube. First repair// Did not know about the filter with check ball to keep fuel primed..So they replaced what they saw.
@Old1Too
@Old1Too 3 года назад
We have 3 skid loaders on the farm. They are by far the works things to work on. Everything is compact and on to of whatever you're trying to fix. But they are fun to use and handy. Slap some fluid film on those wheel studs. Have fun!
@QuickSpeedShop
@QuickSpeedShop 3 года назад
This thing is handy. I don't like the foot controls for the bucket. I think newer skid loaders are all wobble stick controlled which I think would be way easier to run.
@Raydawg
@Raydawg 3 года назад
Oh something a bit different, but cool. very interesting. Thanks for sharing the experience :)
@QuickSpeedShop
@QuickSpeedShop 3 года назад
Sometimes I have to change it up depending on what is broken around here 👍
@diywithjonandpebbles
@diywithjonandpebbles Год назад
They are called oetiker clamps. The proper pliers actually has a third part that pushed the crimped portion down toward the hose flat. Look at the clamps on a CV joint. Same thing
@lawrenceveinotte
@lawrenceveinotte 3 года назад
i have a 7753, pretty much the same machine, i fuel pick up tube on mine has fallen off and i'm just running a 2 gallon jug tied to the side for now, i'm going to try and use a newer style when i do fix it, in the last week i had to rebuild my engine cooling blower right angle drive, bobcat wanted almost $600 for 4 bearings and two seals, i bought after market for $67, the drives have gear oil in them and you should check yours, it has a hex plug you can see when the cab is up, you want to make sure the blower is working, check the belt, air should blast out the side vents with the machine running, i really enjoy my machine.
@QuickSpeedShop
@QuickSpeedShop 3 года назад
Thanks for the tip on the blower!
@lwsf251
@lwsf251 2 года назад
Next time put gromet on plastic line and install in tank hole then push connector into gromet and it will pop right in this comment is actually from Leremie's father Michael
@jorgeirizarry106
@jorgeirizarry106 Год назад
I bought a used 873 skid-steer, it turn on but when I try to go forward or reveres it cut out. what should check out. thank you for time
@QuickSpeedShop
@QuickSpeedShop Год назад
I don't know. This wasn't mine and I don't know much about them.
@aussiejas6599
@aussiejas6599 3 года назад
Great video Shelly, We i was driving a tip truck, had to load a bobcat on to the back to transport it around, only loaded it on and off the truck, Tried using it to dig stuff. FAILED so i gave up digging and just would transport them. Bobcats are not like a car or truck to drive, Don't like them. YUCKY.
@QuickSpeedShop
@QuickSpeedShop 3 года назад
Yeah, they are not the most intuitive machines ever designed. I think the newer ones did away with the foot controls and went full wobble stick.
@aussiejas6599
@aussiejas6599 3 года назад
@@QuickSpeedShop That would be way better, Me as a truck driver, Could no get my head around FOOT STEERING.
@shorty48shorty
@shorty48shorty 2 года назад
gonna need new studs pal, rim has polished threads smooth probably...
@QuickSpeedShop
@QuickSpeedShop 2 года назад
They all tightened up after some torch heat except for the initial one I broke off without heat.
@shorty48shorty
@shorty48shorty 2 года назад
@@QuickSpeedShop you got lucky, tip the hat to you sir. My bobcat was free but need not mention similar issues was one of those.
@Tommy_Poole
@Tommy_Poole 3 года назад
You’ve never worked on Diesel engines but do have a spare glow plug relay? Just watch that old Bobcat doesn’t make you pay for all those years of abuse.
@QuickSpeedShop
@QuickSpeedShop 3 года назад
The relay was just a standard 87 electrical relay. Luckily I had a bunch I saved when parting out junk cars. Don't trash it when you can stash it!
@anthonyleonardi3403
@anthonyleonardi3403 2 года назад
@@QuickSpeedShop Hi guy no ki ..
Далее
Troubleshooting a Bobcat With Electrical Issues.
19:13
Fixing a oil leak on a bobcat skid steer
39:08
Просмотров 78 тыс.
Bobcat 773 Died & Won't Start.  @whatsbroketoday
24:52
TRACK LOADER LOGGING (MUD SEASON!)
17:15
Просмотров 2,4 тыс.
Bobcat 743 Glow Plug Repair Skidsteer Fixes
12:27
Просмотров 2,9 тыс.
Gardner Engines: a nightmare!
12:40
Просмотров 75 тыс.
Common Rail Diesel - No Start Fuel System Basics
53:01
Просмотров 314 тыс.
Busted Bobcat, Why Won't It Run? Lets Find Out,
57:24
Просмотров 378 тыс.