Fixing a DEAD arcade monitor with a 26¢ part! 💀 Kortek KTN-2001 saved! 📺 Q*bert restoration part 5

Overtime Arcade Game Restorations, Repairs, & More

Подписаться 4,8 тыс.

Просмотров 2,2 тыс.

50% 1

Join this channel to unlock EXCLUSIVE members-only perks: / @overtimearcade
iPhone/iOS users! If you don't see the Join button, check out this brief video for an easy solution: • How To Join RU-vid Ch...
A very special THANK YOU goes out to ‪@tigheklory‬ for providing the Radio Shack Desoldering Iron used in this video! Please make sure you're subscribed to Tighe's excellent RU-vid channel: / tigheklory
Episode #93
Find me on the KLOV forums as CharlieG: forums.arcade-museum.com/memb...
Follow Overtime Arcade on Twitter: / overtimearcade
Watch The Coin Jam Podcast on RU-vid: • The Coin Jam Podcast or listen on your favorite podcast platform: anchor.fm/coinjam
Tools & parts used in this video (contains affiliate links)...
- Fluke 117 Digital Multimeter amzn.to/3CKpACT
- Fluke AC175 Alligator Clips for Multimeter Test Leads amzn.to/3XcRhMi
- 10 Pieces and 5 Colors Test Lead Set & Alligator Clips ebay.us/cKxhvW
- Bertech Soldering Workstation Mat amzn.to/44VlvHb
- Hakko FX888D Soldering Station amzn.to/3RPzKWS
- Hakko FR301 Desoldering Tool amzn.to/3ed6sEd
- Hakko 633 Soldering Iron Holder amzn.to/3CLlKZW
- Kester 44 Rosin Core Leaded Solder amzn.to/3EvTY5i
- Hakko 611 Solder Reel Stand amzn.to/3TwdBhw
- Kester 186 Liquid Flux Pen amzn.to/3ROjaqk
- Hakko CHP-170 Micro Cutters amzn.to/3TLxP7t
- Hakko CHP PN-2005 Long-Nose Pliers amzn.to/3tvV0e6
- Chemtronics Chem-Wik 10-5L Rosin Desolder Braid/Wick www.digikey.com/short/w9f982m9
- NEW! Radio Shack Desoldering Iron amzn.to/3y6KYCq
- GC Electronics Alignment Tool Kit amzn.to/3tvTt8b
- CraftyMech Test Pattern Generator (TPG) www.mikesarcade.com/cgi-bin/s...
- CraftyMech TPG Cables www.mikesarcade.com/cgi-bin/s...
- Build your own Compact/Portable Arcade Monitor Isolation Transformer Power Supply • How to Build your own ...
- 0.47 Ohms 1 Watt Metal Oxide Resistor www.digikey.com/short/zqvj8p0n
- 2.2uF 450V Nichicon 105° Electrolytic Capacitor www.digikey.com/short/9zm5cctm
- JROK Mylstar/MSF Multigame JAMMA PCB www.arcadeshop.com/i/1060/myl...
Theme Music Credit: "Synthwave 80s" by AlexiAction (used with permission under the Pixabay License) pixabay.com/music/synthwave-s...
#arcades #restoration #arcaderestoration #retrogaming #arcadegames #arcadecabinet #classicgaming #mancave #qbert #kortek #crt #fpga

Игры

Опубликовано:

4 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 54

@gamehulk 2 месяца назад

Neat! I can't believe it was the burnt resistor with the hole blown out the side the whole time! Great to see that monitor come to life finally.

@overtimearcade 2 месяца назад

Well, I’m sure the shorted MOSFET and rotten caps didn’t help, but my guess is the bad resistor was triggering the shutdown circuit, so yeah, this was the final straw!

@tigheklory 2 месяца назад

Just want to say that there's nothing wrong with using the Hakko or wick. I just like to save my wick for when I really need it since it is a consumable.

@overtimearcade 2 месяца назад

The Hakko and Radio Shack pump also have the advantage over a wick or soldapult of being a one-handed operation.

@bradallen8909 2 месяца назад

Why? Solder wick costs next to nothing.

@overtimearcade 2 месяца назад

The good stuff, Chemtronics Chem-Wik, is a bit pricey and it’s a consumable.

@Phil-Sands 2 месяца назад

Back in the 70's I used wick all the time, it was always infused with flux unlike nowadays.

@overtimearcade 2 месяца назад

I’ve used solder braid/wick before, but this Chemtronics stuff is soooo good!

@j.lietka9406 2 месяца назад

Great "brought back from the dead" video! Thank you 🤓

@overtimearcade 2 месяца назад

Thanks for watching! I couldn’t allow the Kortek to defeat me! 😅

@hiredgun7186 2 месяца назад

that RS iron is an archaic version of the auto pump desoldering tool , a low cost alternative that didn't have quite the umph as its big brother. they still sell them , but if you already have a desoldering tool , its really a step back

@overtimearcade 2 месяца назад

This is an accurate assessment IMO. It does the job, although I do indeed wish the bulb had a bit more “oomph.”

@j.lietka9406 2 месяца назад

That suction bulb doesn't have a great capacity.

@overtimearcade 2 месяца назад

Maybe I can refit it with a bigger one? 🤔

@j.lietka9406 2 месяца назад

@@overtimearcade hmm... Yes, that might just work!

@overtimearcade 2 месяца назад

NEED MOAR POWERRRR!!!

@Bloodyguts75 2 месяца назад

Good work, Charlie!

@overtimearcade 2 месяца назад

Thank you, sir! 🫡

@MikesArcadeMonitorRepair 2 месяца назад

Great job! However, if that Radio Shack desoldering iron actually gets to 734f, I'll eat my hat.

@overtimearcade 2 месяца назад

Ha, thanks! I’ll try to dig out an IR thermometer to test it!

@Quicksilveraus 2 месяца назад

Hi Charlie mate stick with Mikes method imho just use bit of Amtec / Stirri tf559 v2, (v3 smells like cotton candy) stick with that method saves lifting pads , nice fix always check those resistor :)

@overtimearcade 2 месяца назад

I know, and I will, but it’s fun to try new techniques. 😅

@nickademuss42 2 месяца назад

Did you pre-tin the iron? it helps tem get a good flow and seal, I always dipped mine into paste flux, worked great.

@overtimearcade 2 месяца назад

You know, that would have been smart if I’d thought of it at the time… 😂

@briankuhn8997 2 месяца назад

where do you find your schematics for these games ? have an older golden tee 2k (1999) regular version

@overtimearcade 2 месяца назад

The two best sources IMO are the ARCade ARChive and the KLOV website... arcarc.xmission.com/ www.arcade-museum.com/manuals Specifically, here are two manual scans for Golden Tee '99 (2K should be basically identical)... arcarc.xmission.com/PDF_Arcade_Manuals_and_Schematics/Golden%20Tee%2099-2K-Classic%20Manual.pdf www.arcade-museum.com/manuals-videogames/G/GoldenTee99.man.pdf You'll find the cabinet wiring schematic on page 35. Earlier games often included complete schematics for the boards too in their manuals, but later games like these omitted that kind of detail.

@tigheklory 2 месяца назад

There are replacement tips for the iron as the hole gets larger over time. As the hole gets larger it works better with flybacks. I suppose you could use a small drill to widen the hole slightly.

@overtimearcade 2 месяца назад

Replacement tips, but only the same size? That’s interesting that the hole wears out and gets bigger over time! 😶

@tigheklory 2 месяца назад

@@overtimearcade There may be larger ones, but it's easy to just use a small drill too.

@GWorxOz 2 месяца назад

Someone bought the Radioshack brand and is ressurecting it now. A few stores open at this point.

@overtimearcade 2 месяца назад

The Salvadoran parent company?

@GWorxOz 2 месяца назад

@@overtimearcade Unicomer Group acquired RadioShack’s intellectual property assets and domains in about 70 countries around the world, including: the United States, Canada, Europe, and China; and aims to manage the business of technology products with excellence, generating long-term profitable relationships with our partners.

@GWorxOz 2 месяца назад

@chriskaprys 12 дней назад

whoa!

@overtimearcade 12 дней назад

It’s true!

@thomasberrios9651 2 месяца назад

Charlie love your videos. I do have a question I’d like to send you a picture of a cabinet that I can’t identify . Not sure where to send it. The marquee is Run and Gun. But I think it was converted . Let me know if you can help me.

@overtimearcade 2 месяца назад

Thanks, Thomas! Feel free to PM or tag me on KLOV (CharlieG) or Twitter, or send an email to overtimearcade@gmail.com

@bradallen8909 2 месяца назад

It’s SOLDER. Not “sodder”.

@overtimearcade 2 месяца назад

GET THE L OUTTA HERE WITH THAT NONSENSE! 😂

@tigheklory 2 месяца назад

@@overtimearcade That's my boy! Don't be tricked into saying it the British way! USA!!

@overtimearcade 2 месяца назад

My seventh-great-grandfather didn’t fight in the Revolutionary War for me to speak the King’s English!

@bradallen8909 2 месяца назад

@@overtimearcade As much as I was amused by your response, it doesn't matter where you're from, the word has an L in it :)