Fixing telescoping steering wheel on a 77 corvette 

Thanks Donald. This was driving me crazy until I realized the locking screws were missing. Thanks for the insite!!!!!

Thank you so much. I thought I had a major issue until I saw this video.

Great video.. I am putting the horn button back on my 1979 Vette and this helped a lot. Thanks

Took me 5 minutes. Thank you!

Wow. All done with one hand! Thanks.

thank you . about to go try it now.

Thank you for my 77 😊

Thank you it work great!

Thx brother.

Thank You

good video informative

Is your horn working? I believe that the metal part with 3 holes for large screws should go bellow the red adjusting part.

If you go to 5:21 in the video where he is screwing down the entire assembly, you will see the silver ring sitting on top of the red crossbar. This is wrong . The lower silver ring goes under the red and the red is sandwiched in between the upper silver section "horn ring" and the lower silver ring with the 3 threaded sections. MAKE SURE the top silver ring section that has a little foot on it is pushing down on the little horn pin he pushed on with his screwdriver at 4:18. This video shows the assembly as it should be. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-jrS5I4IEmDo.html

Thank you, would a 1976 be the same?

good info thank you.

Hello, I tried this out, but the steering wheel is still moving back and forward. What could be the problem? Hope someone can help me...

man lernt ständig was :))

I 've had corvettes those horns r a piece of shit