Fixing what was wrong with Jumper T-Pro // OPENTX TUTORIAL

Подписаться 340 тыс.

Просмотров 52 тыс.

50% 1

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: www.fpvknowitall.com/ultimate...
SUPPORT ME ON PATREON at: bit.ly/2Ep5Sia
THIS IS MY FULL TIME JOB. Here are other ways that you can support me: www.fpvknowitall.com/support-me/
---
0:00 - We're going to fix the 2 main problems with the Jumper T-Pro
0:54 - "Exclusivity Groups": you can now configure the 6pos switch behavior
4:24 - How to make the 6pos act like all the other radios before it
11:42 - A safer way to arm/disarm with the shoulder switches
16:48 - We have really turned this into a decent radio!
My full review of the T-Pro is: • Jumper T-Pro chose for...

Опубликовано:

1 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 172

@JoshuaBardwell 2 года назад

FIrmware that fixes the broken "toggle" setting is available here: we.tl/t-gKE9FMmona

@hertje21 2 года назад

Joshua Very nice solution, I will probably change my arming method to the one you discribed in this video!

@typxxilps 2 года назад

to stretch 7 states over 200 means having 6 steps and therefore 200 has to be divided by 6 and not 7 which then results in a stepwidth of 33 which leads to this symmetrical row of values instead of ending at 80 -100 -66 -33 0 33 66 100 Dividing 200 / 7 lead to 28 which then accumulated to the faulty upper end which did not reach 100, just 80. For all that struggle: look at a ladder and its steps. 7 steps means you have 6 gaps between each step, therefore 200 / 6 and then it works out fine.

@sakrd 2 года назад

Transfer expired

@stipple5549 2 года назад

Can you post a file share of an edge TX config that just has all the fixes done. Left and right being on off switches And the 6 switches. Not sure if configs with basic switch correction would be outdated quickly with radio FW updates. If the pro 🤣

@FhazalFPV 2 года назад

transfer expired any update on this fix ??

@ghall05 2 года назад

I love open tx! It's like a whole slew of building blocks and there are near infinite possibilities of how you can combine them! Great video explaining this. It is very hard for someone who does not have a computer programming background to stumble upon one of these solutions so I really appreciate you making videos like these!

@DennisSattler 2 года назад

It's about four years later and I have to say, Thanks again Josh, you saved me a lot of time and frustration trying to figure things out. Thanks again, I will enjoy.

@CapnBry 2 года назад

Holy smokes what, I never scrolled that far down! I like that not only can you group the 6-pos how you like but you can also set their initial state on powerup. This is a ton more flexible than the old way, although maybe a little confusing for newbies. Glad we have you to learn them today.

@Anzyclos 2 года назад

Things like this are what seperates the "once in a while hobbyist" from the enthusiasts. 😁👍

@edwardvitale8181 2 года назад

Just wanted to say thanks. using this video and an older one where you programmed your remote to fix max throttle using open TX, I was to do it on the Jumper tPro and I am an absolute newbie. I set to 75% max power and now I am not flying the drone off the walls in my house. very much appreciated.

@sganzerlag 2 года назад

I don't own this radio, however for those who do or who want one, this video and the product review video are incredibly crazy useful. For me, the video was fun to watch and helped me get an insight into some open tx stuff. The under the table parts and the dog scene were super funny.

@VadimBryksin 2 года назад

You are the best as always! Instead of crying why they made it so badly, helping Others with workarounds and fixes! ♥️

@keithws79 2 года назад

Thank you for teaching us more about OpenTX/EdgeTX.

@frankcastillo8869 2 года назад

Looks like Albert set up the arming switch the same way but he also added the voice prompts so you know which state the switch is in *armed or disarmed.

@sendorm 2 года назад

Yep it is the same way Albert did :) Great minds think alike. It is also good idea to make a global "play track" for L2 switch, stating armed and disarmed.

@ObsequiousV4 4 месяца назад

God tier upload my man. I noticed the user manual with this controller is just a quick start guide and I just started FPV and was having trouble understanding some of the submenus. Much appreciated!

@NatanRufino Год назад

I really love the design of this radio! You, brother bardwell, are just getting it better... thanks for the great video, as always. 😘

@M4trix42 2 года назад

Great video! Your solutions make this radio even more valuable and versatile! Would be nice if EdgeTX included the Exclusivity Groups for the TX16S to spice up the 6pos switch 😃

@guambra2001 2 года назад

You've helped me so much, please keep doing what you're doing.

@ianduonghawaii 2 года назад

I have no idea what you were doing but i’m here to watch the whole video and show support! 🤙

@airdevil21 2 года назад

Awesome video that makes the radio work.

@_Diggery 2 года назад

Thanks for the video! I had already taken a gamble and ordered one hoping there would be software fixes for the switch behaviour. My radio arrived today, about 30 minutes after EdgeTX 2.6.0 was released so first job was flash and setup. I can confirm the toggle function works on the switches. They act as momentary when set to toggle and 2pos when set to, erm, yup, you guessed it! I still can't think of a use for them for my sim and Whoop flying though!

@jazzsutrisno6083 2 года назад

This is really really helpful. Thank you so much mr Bardwell🙏

@gmivisualsjason3729 2 года назад

Another excellent video Joshua Bardwell 👏 👍 👌 😀 🙌

@will450ktm 2 года назад

cheers for the help I was going to buy this but think I will wait for the Zorro to get back in stock what a work to get this thing sorted

@johnroberts7322 2 года назад

Love the editorial jump cut with you in a weird/random position. You should do that more! No need to say this is Joshua from the future. lol

@yessir209er 2 года назад

awesome video keep up the great work josh

@h2o-fpv623 2 года назад

Really nice work thank u for showing us how to make it better. I don't have this radio yet I want to get it.

@decommonifyable 2 года назад

Don't have that radio and probably won't ever but I watched this for some reason and my take away was that I like your dog and so do you.

@AxelC2020 2 года назад

Thank you so much for including the good doggo :)

@alfindo27 2 года назад

love the ending ! 😁

@Tom-wl9sx 2 года назад

Great video! Keep on with the good work 🙂

@grlskce 2 года назад

You should add throttle check to two button arm. If throttle - 100 and SD and SC, then arm L1 and SC down, SD down L2 a

@MrAlucardDante 2 года назад

That’s clever, although betaflight won’t arm if the throttle is not low

@grlskce 2 года назад

@@MrAlucardDante but if you arm without throttle check, radio will switch Channel to positive, play sound 'arm' but quad wont arm, then You have to disarm, lower throttle and arm again. Its annoing

@grlskce 2 года назад

Example ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-2hEwzB2uBFA.html

@MrAlucardDante 2 года назад

@@grlskce true. I used to have an audio cue for arm/disarm. But i find it annoying. My quad is either next to me with the battery unplugged if I’m not immediately flying or in the air so I know if it’s armed or disarmed. You could also use telemetry to know if the quad is armed or disarmed like FM2M does, this way you are never unsynced, if you of course have telemetry

@artemis158 Год назад

Thanks for the solution, I have the same control 😁 👋🇲🇽

@sburnham3 2 года назад

The more I see if these settings, even not using it I learn something... thanks

@lotusz31 2 года назад

To make arming a little safer and less error prone, you can use duration on L01 to only toggle if you have both buttons depressed for a few milliseconds...

@valerioamato3761 2 года назад

oh master! thank you for your time ;)

@MCsCreations 2 года назад

Fantastic work, Joshua! Thanks a lot! 😃 About Albert's solution, it's different. But that's all. Anyway, stay safe there with your family! 🖖😊

@MrAlucardDante 2 года назад

Albert did the exact same thing, an AND on L01 and a sticky on L02. He just used MAX on the mixer instead of the value of L02, but that’s worse IMO because the channel goes to 0 instead of -100, which is not how a traditional 2POS switch works.

@MCsCreations 2 года назад

@@MrAlucardDante Yeah, basically.

@Indy64738 2 года назад

Cool, I was already interested, but having lots of doubts because of the lack of the versatility of this transmitter simply due to the lack of … switches… flying helicopters, drones and airplanes, I need more options… more channels… Thanks to you, it seems possible to adapt and have switches for rates, flight modes, idle up 1 and 2, and securely arm and desarm… and buzzer 😎😎.. for that I need to be able to use properly and independently the 6 “function” buttons!!! Thanks a lot!! Bit of a headache though.. 😅😅😅

@alexzalk9860 8 месяцев назад

Thanks!

@crash_gordon 2 года назад

There's a shortcut to get your input to MAX. Long press on the field instead of short pressing, and you get a menu with groups of inputs instead of individual ones, and one of them is MAX.

@pritchfpv6070 2 года назад

wow joshua is looking very sharp today

Год назад

Great tutorial JB! I would love to see your review of Jumper T-Pro v2 😋 also have some question because on my v2 with EdgeTX preinstalled I cannot make arming/disarming mix work as on this video. On my controller it changes channel between 0 and 100 instead -100 100. Every step was done just like you did 😢

@doslobosoriginales Год назад

Thought I was going to pick up the tx12 as my first FPV radio and didn’t think I liked the gamepad style controller but after watching your videos I’ve decided on this controller with a 1k mw backpack elrs transmitter module. I really like the simplicity and ergonomic look and dual 18650s instead of a single like on others. They were out of stock on the internal express protocol transmitters but that’s okay as I read about a firmware bug with them I wanted to avoid and the extra chumminess and porcupine radio antennae make it more appealing tho me. Next I’m deciding if I’m gonna pick up a pre built disrobe Roma LR 4” frame and add diversity Rx and starlight FPV camera or just build the whole damn thing from scratch. Availability is low on four inch Dave C type LR parts, frames etc but I’m hoping to find a dead cat that speaks to me and build it for urban night flying. Love your videos keep them coming!

@egemenx5813 2 года назад

Dear Joshua I am learning lots of thing from your videos. Thank you very much for your great works.. I want to ask a question jumper t pro. I want to set radio failsafe but I couldnt make it.. hoe can I solve it? I use Inav on my drone and I have a GPS.

@GuayusaPure 2 года назад

Never press like for anyone, you deserve it this time. There you go Bubba! Like

@ObsequiousV4 4 месяца назад

I'm currently using 3.3 edge TX and I'm able to get momentary switches by changing to the "toggle" option that you address as being broken, which is odd because that's not usually how a toggle works but hey, free momentary switch I guess. (in the setup screen for the model)

@p.i.engineer398 2 года назад

there's a shortcut on other radios where you can hit the menu button while in the edit page of a mixer and it will show you the channel preview screen. then exit to get back to the mixer edit page

@JP-qq2kn 2 года назад

I canceled my order for the Zorro, just canceled my order for the t-pro with external elrs module cause they just announced an internal elrs version that goes up to 1W.. Waiting for your review of the Zorro and Commando 8 before I purchase anything now..

@Bill14886 2 года назад

Awesome stuff Joshua. Thinking of buying a New E flight plane and radio . But I use X9D . and a orange 🍊 DXM 2 Module to fly my Spectrum Recieverd plane. Not sure if I want a Spectrum radio? At 62 years old this shit is getting difficult to stay up with. Thanks for making some of it understandable for me.

@drunkskunk00 2 года назад

Thanks for the great tutorial. I'm not sure i would want this radio, even with the fix. twice in many years of flying I have had to use disarm in an emergency to save someone else from serious harm. while i hope it never happens again, I'll never fly without a standard disarm procedure. if you need that switch in an emergency, you better not have to spend 1/10th of a second remembering which switch it is or how it works.

@mahendra4352 2 года назад

You're right. I use T Lite and as a beginner, I crash my whoop alot. If I start loosing control, I just flick SWC (Arm/Disarm), fast & easy. No property damage & human casualties so far 🤭.

@eliomaia 2 года назад

Hi Joshua! Could you maybe take a look at the gimbal calibration on the Jumper T Pro? I like it a lot due to the design and size but I noticed that my gimbals cannot reach 100% at all corners after the calibration sequence. If I calibrate it in a way that the corners, which cannot get to 100% are saved as 100% then I lose resolution at the others which is not a big deal but it's kinda frustrating. I got two Jumper T Pros and both had it. It would be awesome if the AG01 Mini would also fit in the T Pro because the Zorro wouldn't be an option for me... :( Maybe some other experience similarly.

@sjoervanderploeg4340 2 года назад

Heh, this feels more like setting up a multi position switch in Deviation TX where it registers switch up down for every position of the switch... I did get eventually used to working with that mixer, after mocking about with it for a long time :)

@Rogue_FPV 2 года назад

J.B, why are you lying on the floor? LOL

@RubyS.1 2 года назад

That makes this radio alot more attractive for a small fixed wing radio.

@__meo__ 2 года назад

Could you combine a 3 pos switch to arm/disarm including flight mode selection? Like down is disarmed & airmode, center is armed & airmode, up is armed & angle mode? Would it cause problems with ELRS? I'm uncomfortable with this momentary solution when you need to quickly disarm for a reason...

@loganlexow 2 года назад

Open/Edge TX are so powerful that it's hard to know everything. I would love A Logic Switches vid

@nbader8725 Год назад

HI, chapter "A safer way to arm/disarm with the shoulder switches". It is possible to arm with both shoulder switches, and disarm with only one of the two switches?

@user-dz5mw4km1x 2 года назад

Это полезно для меня. Спасибо!!!

@thetubemeister82 2 года назад

Could also just use a sticky switch on one side and then use the other side normally as a pre-arm mode in Betaflight. Then there is no need to press two switches to disarm.

@airdevil21 2 года назад

Hi Joshua. I bought the T pro and intalled EdgeTX on it and followed your instuctions to make the momentairy switch a sticky switch but it doest work...is the a bug in edge tx that you know off? I have now made my switch 1 the arm switch not ideal but it works.

@hofa 2 года назад

Could it be possible to have either one momentary shoulder button for disarm instead of having to press them together?

@colddash5598 2 года назад

#callingAlbertOut without calling Albert out...! 🔥

@anujchandkapoor 2 года назад

I think it's still a oversight on the part of Jumper. I own the T18 and I bought it after one reviewer said it's awesome then your video came out recommending the Radio master since then I stopped watching the other RU-vidrs and my respect for you grew. I am an automation engineer and I hate it when hardware developers screws up with the design and then expect software guys like us to fix it. This looks similar in my opinion.

@UNLOCKEDANDOVERCLOCK Год назад

How would you set it up to flip the drone...what buttons would you use?

@alfindo27 2 года назад

Halo Joshua, could u please tell us how to backup the old radio setting to this stuff? I have problem with that, I cannot Backup my old opentx setting to this new T pro. it seems like Opentx companion cannot do that. thanks !

@horstderheld22 2 года назад

How well does VelociDrone Combat work with these back buttons?

@divingfalconfpv4602 2 года назад

He did pretty much the same. Except he did max and switch L02 in aux.. and set a sound for arm and disarm..

@fabienhaff6843 2 года назад

BTW you can change a 2 pos switch to momentary using Logical switch -> Function OR

@circuitdotlt 3 месяца назад

I have the v2. It has a serious issue with battery contacts. Knock it slightly on the front and it switches off. knock it harder, or drop it, and the 18650 cells become loose and rattle inside, the controller will not power on. I've fixed the issue on mine, but it was not something an average person would do.

@hobbynfunchannel8283 Год назад

Hello, can you help me, why my t pro throtle/left trim button can't move upright? For right, left, down move no problem

@donerkanat1328 2 года назад

hi ı bought internel ELRS version of this tx . I have some issues cant find solution . Can you help me please. when ı set it up to hight tx power (250 mw or 500 mw ) . Speaker have some parazite sound . and pitch and roll values on betaflight shaking badly . when ı reduce the tx power it is getting well .

@ziggywillis1 Год назад

can jumper t pro with built in erls work with frsky like flash it very confused or have i got to buy other one please

@FedeFPV 2 года назад

I use a momentary switch to arm and I decided to include a timer in the switch to arm/disarm, I have to press it for at least 0.5 seconds to arm and 0.2 seconds to disarm..

@POLARISFPV 2 года назад

What could the channel range be used for? well I mean what is it typically used for?

@craigdavidson52 2 года назад

Hi Joshua, it's Craig from the now... this will work the same with Edge TX? And thanks for a great tutorial.

@JP-qq2kn 2 года назад

Will the Happymodel ES24TX-LITE elrs module that is supposed to be for the Jumper t-lite work on the Jumper t-pro without taking apart the controller? Does it just plug in?

@Cre8ionz. 2 года назад

7:09 min - best calculator IMO "Real Calc"

@christhorney Год назад

i just received my elrs version today and it came with a latching switch on the right shoulder like the mod kit they sell pre installed, im struggling to figure it out lol

@deejay-blinkz-official5604 Год назад

I might be a bit late … but .. I just bought the jumper t pro (not the 1w internal) it comes with open tx…. How do I get edge tx on it ?

@AvoVit Год назад

Why does the F3 EVO Brushed Acro flight controller with built-in DSM not respond to the movement of the Jumper T-PRO sticks?

@KINGREAPER950 2 года назад

Joshua I’m struggling to bind my radio to a r-xsr rx do you have any help?

@sams0748 2 года назад

Should I get this or the radio master zorro? I need a cheap radio for drones

@henrique4329 2 года назад

Can i use external module TBS Crossfire Nano whit T-Pro ELRS (internal) version?

@straw6744 2 года назад

I'm taking mine to the geek squad at bestbuy

@mervintthomas 2 года назад

I am confused whether to buy the Jumper T Pro or the Radiomaster Tx12. Please help

@Andre-ul4me 10 месяцев назад

Hi, could you tell me how to do a factory reset? Tank you

@joshs5281 Год назад

How do I unlock the full mw when flashing to the eu version?

@dagreatghosface 2 года назад

Never had an opentx tx but can you do all of this on a computer?

@hoagietime1 2 года назад

I would still get the zorro over this for the larger screen. Fixed wing guys love the inav lua so you can fly with the instruments when you take your goggles off

@divingfalconfpv4602 2 года назад

I feel like my inav lua doesn't work on quad for being level. Or pitched down lol. I downloaded it for heading. But heading didn't work either

@divingfalconfpv4602 2 года назад

Also yea I'm eyeing zorro

@divingfalconfpv4602 2 года назад

That's better than my t18 pro

@AliBFPV 2 года назад

should set up another logical switch with OR, then use the that logical switch for disarming the sticky switch. So its double press for arm, and single press of either to disarm. I wouldnt want to have to thing about double pressing for disarming in an emergency

@Llegando_Tarde 2 года назад

Do the gimbals feel like the tango2?

@petercane6376 2 года назад

I have today ordered a T pro although I have a Zorro. So with some head work these switches can be made to be useful. I will download the full manual and have it printed out. Thanks a lot Josh...you are super smart. The dog is AWESOME. Is he a jumper too?

@zipppiz Год назад

So witch Transmitter do like the most now? Think I'm going for the Jumper.

@petercane6376 Год назад

@@zipppiz If that question is for me? First off it really is what " you like". I like the smaller screen on the T pro as it does not look like an ugly afterthought and contains all I need to know. I like the six button switches in a row that light up when clicked. Light on means my electric motor is " armed". I like that the T pro comes complete with natty carrying case. I like the battery life on T Pro. On the Zorro I like the miniature black toggle switches and the general feel of it. The switch layout is more professional if you like as they use metal switches. I do not like the plastic rocker switches on T Pro. It really is best to go to the shop ( or friends that have them) and feel them out yourself. For every point I made, someone can and will reverse that so its is all on you. Quality wise I would say they are the same albeit Zorro could win with the switches. For what it is worth I have sold the Zorro and still have the Jumper!!!! 😉

@zipppiz Год назад

@@petercane6376 Thanks Peter, very detailed answer and I really appreciate your input. I did go for the Jumper and got a really god deal and it was quite a bit cheaper than the Zorro. I would have gone for the Zorro if the battery life would have been better. But I also like the included case, and the smaller form factor of the Jumper. It is a bit of a shame with the switches bit I'm sure I'll get used to it. Thanks again for your great input, ut really makes me feel a bit better about my choice, it sure wasn't easy 🙂

@rocketshipsandrobotsinterg2184 2 года назад

Can sw5 be reassigned to sw6? For arm . Thats what id do

@SeeFPv-qm6ie 2 года назад

do you know if this radio has Lua script?

@billhash8296 2 года назад

So Joshua or anyone else out there I have a radio Master TX 16s and I'm looking to add a Express lrs modular to it so what is everybody's best pic for this I like the idea that you can add one on and don't have to fool around with loading the script into the radio.

@MrAlucardDante 2 года назад

Definitely the HappyModel ES24TX Pro or the Namimno Flash, depending on what is available to you and of course prices

@sehoffman9392 Год назад

I got this radio and it won’t boot up. It does the …. Then it just shows the sleep emoji? 😴 suggestions

@sergentum Год назад

I assume it's not possible to set up from pc, right?

@cruisinginacro 2 года назад

Got a tough one for you Josh...How do you create voice for armed and disarmed with this arming method???Hope all is fine!!!

@JoshuaBardwell 2 года назад

Base it on the status of the logical switch.

@cruisinginacro 2 года назад

@@JoshuaBardwell did but pronanounces both armed and disarmed when arming!

@vitaliyburov2919 2 года назад

hey Joshua. Do you know or may have a suggestion on how to connect Jumper T-Pro to TBS Crossfire Micro Transmitter? Hope to hear from you

@JoshuaBardwell 2 года назад

TBS makes a conversion kit that will change the Crossfire Micro to a Nano that will fit on a lite module bay. No problem.

@vitaliyburov2919 2 года назад

@@JoshuaBardwell could you point me to the conversion kit?

@JoshuaBardwell 2 года назад

www.team-blacksheep.com/products/prod:xf_nanotx_retrofit

@vitaliyburov2919 2 года назад

@@JoshuaBardwell Thanks!!!

@VikingMultimediaYT 2 года назад

Who would have thought playing Minecraft would have taught me all the logic gates needed to understand how to program radios for FPV years later? An and gate, plus a t-flip-flop and you're off to the races. Also, I preordered the Zorro... why am I watching this video? lol

@rippfpv 2 года назад

Does it run edgetx yet?

@erikmackensen3210 2 года назад

Worst case would be than a broken arming button during flying. You are than not able to disarm. Maybe a secound security thing is not wrong. Also when you let another person fly you are not able to disarm fast. Is this fixable with a replace if L02?

@JoshuaBardwell 2 года назад

I mean isn't that always true? If you have a single 2pos for arming, then if you break it while you fly, you can't disarm. Same situation.

@sganzerlag 2 года назад

@@JoshuaBardwell duh lol.