Fixing wobbly gaming chair 

Im glad it helped 👍🏽😃

Awesome! :)

Max Gardner I’m glad it helped you 😃

I hope it helps someone out there. I apologize for the crappy recording it was just spontaneous! Didn’t expect this many people to watch it 😅

Glad I could help😊

Bleashee Vor you’re welcome 😊

You’re welcome! I am glad it helped 😁

I'm glad it worked! Cheers!

My pleasure

maybe they didn't find the vid useful

iamN3RA anytime!

It didn't impact anything for me since I still have the ability to adjust the height to my liking

"brand new gaming chair" there's your possible answer. Depending on the gaming chair brand, it might not be very well made. I have a La-Z-Boy chair I got from staples and the seat wobbles, as if the seat isn't properly down all the way. But I have no clue how to get a new cylinder if that is the problem. I'd need a new chair anyway because the material that is on the back of the seat and on the seat itself, has decided to tear off into pieces.eeeeee

@@movie0007 thanks for the reply but i wasn't really insinuating because it was new it couldn't have faults, I bought it from amazon and it was a mass produced Chinese knockoff, so the first cylinder going bad wasn't surprising, what bothered me was that I bought a new cylinder locally and had the same issue at the time of the post, but luckily the vendor sent me a new one no charge, this one is a bit longer and isn't set on max height which was his advice for the future

@@dutchglorius Ohhhh really? Mine is always on max height, and I constantly lean back in the chair, while I curl up in the chair while it's leaned back and fall asleep in the chair. So I'm wondering if max height did something, constantly leaning back, or both? Oh I didn't think you were insinuating, I just happened to read that part and thought, even I've had brand new products that have turned to junk within a few weeks. I even bought a new automatic card shuffler, the one side didn't even work. Opened it up, solder spot was broken, loose wire, resoldered, it worked like a charm.

@@movie0007 from what i heard of the guy who sold me the cylinder it's best not to use the at max height, and i know stuff sometimes can have janky parts, had to re weld the plate of me sister in laws gaming chair after some kids got rowdy on it, as a welder the original welds where terrible to see

@@dutchglorius Mine had this big thud as I sat down the past week. I slightly dropped the height and it stopped lol thanks for the advice

The universal I have in the description should work

Thank you! He is so chubby now

Kubelix great find!

did you try and did it work

yea i got that too. got any answers?

Steven Penarrieta being that most manufacturers offer a 1 year warranty I would reach out to the manufacturer for a replacement before spending your own money.

If you search “chair cylinder” you’ll get some results and go through the reviews

Are the wheels falling off? If so buy some of the plumbing white tape and wrap some around the insert pins to create a tighter fit

I just saw this comment and had me rolling 😂! I said “adopted” but my accent is a bit strong

If you put it together check to make sure everything is tight. Otherwise if it’s brand new I would contact the manufacturer to send a replacement. It could also be wheel canister( the base that has all the wheels) it’s possible that the hole where the cylinder goes into is out of spec thus allowing for the extra space

I wouldn’t take it apart if I was you. Since you just purchased it contact the manufacturer and have them send replacement parts!

I know what u talking about contact me I fixed that

Just remember that it'll be good for your back, by making sure you're actually sitting straight. As this could prevent back problems

King Solrac set on a table and use an extension like on 3:54 and hit it with a hammer.

King Solrac that works as well. I hope my video at least helped you get an idea of the process. Best wishes let me know how your replacement goes!

@@pablovaldes1992 yeh I ended up fixing it, thanks! turns out mine snapped and i needed to replace the bottom as well

Get what? The chair or the cylinder? Th chair I bought used off Facebook marketplace and the cylinder I bought on Amazon. I provided a link in the description 😃

For most chairs the universal cylinder should work but you can always take measurements if in doubt

Same, this “gaming chairs” are a scam

Rederis Mangusta I hope this helps you!

If you bought it brand new I would contact the manufacturer! They usually have warranty

@@pablovaldes1992 no warranty sadly :/

DelvxstxrNT I have no clue. More people being on quarantine means more RU-vid time? Maybe individuals are using their gaming chairs more resulting in adverse effects on the functionality of the chair? 😂 but Im with you I have no clue

@@pablovaldes1992 Maybe since we all stay at home, we have more time sitting on our office chairs, then day by day we get annoyed by the leaning problems, so we stumbled upon here. idk. That's my case. lol

Most chairs have manufacturing warranty! If you have the receipt I recommend reaching out to them!

It’s really not that bad it takes all but 15 minutes or less

Imagine being that lazy 💀