No video :(

Flipper Zero Wifi Dev Board Tutorial: Marauder Firmware Update

Подписаться 9 тыс.

Просмотров 188 тыс.

50% 1

PLEASE NOTE: THIS IS ONLY FOR EDUCATIONAL PURPOSES MODERNBROADCAST DOES NOT CONDONE OR SUPPORT ANY ILLEGAL ACTIVITY PLEASE USE AT YOUR OWN RISK
Welcome to ModernBroadcast.
In this quick introductory guide and tutorial, I'm going to show you how to add Wi-Fi capabilities to your Flipper Zero device using a $35 development board.
If you're not familiar with the Flipper Zero, it's an all-in-one Tamagotchi-inspired hacking tool that's packed with features like Infrared, GPIO pins, RFID, NFC, IButton, Sub-GHZ, a Micro SD card slot, and even a cute dolphin pet. It's like a Swiss Army knife for hackers and tinkerers.
But if you want to take your Flipper Zero to the next level, you can add Wi-Fi connectivity using the GPIO pins on top of the device and a special development board. This will allow you to connect to wireless networks, send and receive data over the internet, and even control other devices remotely.
In this video, I'll show you how to set up the Wi-Fi development board to use Murader Firmware and connect it to your Flipper Zero device. I'll walk you through the steps and provide tips and tricks along the way, so you can get the most out of your Flipper Zero and unleash your inner hacker.
So if you're ready to take your Flipper Zero to the next level with Wi-Fi connectivity, be sure to watch this video and follow along with the tutorial. And if you find this video helpful, don't forget to like, comment, and subscribe for more content like this.
Thanks for watching, and happy hacking!
Flipper Zero Unboxing Video Link: • Tamagotchi Hacking Too...
[Flipper Links]
Flipper Zero: flipperzero.one/
qFlipper: flipperzero.on...
Flipper Zero Manual: docs.flipperze...
Awesome Flipper: github.com/Gio...
Flipper Zero Discord: flipperzero.one...
Marauder Firmware: github.com/Ube...
*The file was moved to the root of that GitHub. They keep moving it around so I can’t get a consistent link.
[wifi board case]
www.thingivers...
[ModernBroadcast Links]
modernbroadcas...
Become a member today!
/ @modernbroadcast
#FlipperZero #Dolphin #Educational #Hacking #DeviceReview #FlipperZeroUnboxing #FlipperZeroConsoleReview #Flipperdevices #MultiTool #ModernBroadcast #ethicalhacking #Flipperzeroreview #Flipperzerounboxing

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 521

@ModernBroadcast Год назад

The file was moved to the root of that GitHub. They keep moving it around so I can’t get a consistent link.

@lordpiopio409 Год назад

where can i find it?

@762kilo Год назад

Where is the new link?

@Monster_Rancher Год назад

He changed the version but did not update the link to it, copy the link to the file and change 2.3 to 2.4 and it should download.

@urdadair6619 Год назад

@@Monster_Rancher i love u

@GuidoZ Год назад

It should have not moved around - always under the Wifi Devboard. I do change the ZIP link but the ReadMe should remain. =) Thanks for the shoutout.

@alusito8633 3 месяца назад

I wasted several hours listening to "great techy savants" and then I finally found your video where in a no nonsense approach YOU EXPLAIN the process BRILLIANTLY! You are a very INTELLIGENT PERSON!! Thank you very much!

@ModernBroadcast 3 месяца назад

Haha thank you for the kind words and I’m glad the video was useful. Although I’m sure there are many who would disagree lol

@Aparsanlal Год назад

This is currently the most user friendly video out there for flashing the dev board with the marauder firmware, I would like to see more flipper tutorials from this channel.

@ModernBroadcast Год назад

Thanks for the kind words! Have a great week!

@lexuscrow1932 11 месяцев назад

IF YOUR DEVBOARD FAILS TO FLASH - Press and hold both the reset and boot together, and then plug the device, wait 1-3 seconds, and then let go of RESET FIRST and them let go of BOOT. I kept having connection issues, flashing wasn’t working because it could not connect “A Fatal error occurred: Failed to connect to ESP32-S2 No serial data received”

@humbertocastro151 9 месяцев назад

i love you dude, i spent an hour looking for a solution

@ZZOV333 8 месяцев назад

thank god bro i spent days looking

@lexuscrow1932 8 месяцев назад

@@humbertocastro151 Glad I could help 👍

@lexuscrow1932 8 месяцев назад

@@ZZOV333 I spent days too. Felt like people here might struggle too

@russellrozensky6031 8 месяцев назад

Thank you. Looks like your comment saved me a few days of work

@TylerTechUTube 6 месяцев назад

Smooth jazz was a soild choice for background music, kudos. Thanks for the tutorial!

@ModernBroadcast 6 месяцев назад

Thank you! I never know if to keep the music or stop the music. The audience is very divided on the matter.

@Itz_Skye. 8 месяцев назад

I can not express my gratitude. Thank you so much for this video. I have been looking around trying to find how to flash the right firmware because my board didnt respond at all. Thanks so much, I hope this video will be useful to other people such as me.

@deroace 7 месяцев назад

true

@cardboarddignity Год назад

Somehow after watching this video, I knew how to flash my WiFi board, as well as got rid of my anxiety and work-related stress, treated my headaches and fixed my childhood traumas 😂

@ModernBroadcast Год назад

Wow! Lol thank you for the kind words.

@PBRichfield 7 месяцев назад

Thats what brought me here too

@asipalacios8701 5 месяцев назад

just a quick note to whoever followed along and it didnt work, you need to click reset on the mother board after connecting your flipper

@TrailWolf83 Год назад

This a very good video with details which is hard to find! Thank you for putting this together and for breaking it down for those of us who are unsure

@ModernBroadcast Год назад

Thanks Daniel glad you enjoyed the video! Have a great week!

@michaelzborovan4362 8 месяцев назад

Yea man great vid, most other F0 vids assume everyone already either done this stuff on other devices or somehow knows the terminology and basic functions. A lot of us are using F0 as a learning device(for better or worse). And I didn’t have to rewind this video once like kother vids I gotta rewind parts like 5,6,7 times to catch all the info being machinegunned at me all at once. Hope to see more soon.

@ModernBroadcast 8 месяцев назад

I’m glad it was helpful, I want to make more but running low on Flipper Zero ideas that I understand or within YT TOS

@michaelzborovan4362 8 месяцев назад

More than helpful... I used your video to flash my wifi board cause sasquatch talks to damn fast and like he's explaining the basics to other hackers,lolol... your vids are super easy to follow and make sense to the people who don't have any sense yet...lol

@michaelzborovan4362 8 месяцев назад

But I got marauder working but evil portal keeps saying it can't find the ap.config.txt file and I can see it in qflipper so idk, gotta figure that out. Evil portal was the one I really wanted too.

@ModernBroadcast 8 месяцев назад

@@michaelzborovan4362 others may have solved this but in my experience for the WiFi board you must choose. Evil Portal or Marauder.

@michaelzborovan4362 8 месяцев назад

Yea I'm pretty sure that's exactly one of the problems... evil portal is literally listed in marauder under wardrive and above targeted deauth... how??? Lol Any suggestions from anyone???

@rocketsfall Год назад

Possibly stupid question, but is this supposed to work with the default official Flipper firmware or would this require Awesome Flipper or Flipper Unleashed to use? I've flashed the board but those options aren't under GPIO, and I'm wondering if that's why it's not working or if I've messed up something else maybe.

@ModernBroadcast Год назад

Not a stupid question at all! So it has limited functionality with the default firmware. If you want the most outta your board I strongly suggest upgrading the firmware on both the board and flipper! Happy hacking!

@rocketsfall Год назад

@@ModernBroadcast 🤔🤔🤔

@officialbeefy 23 дня назад

If you’ve put in 1 in the command prompt, and you can’t find the ESP32 Marauder Firmware on the flipper after disconnecting from the computer, you can slow down the baud rate to 9600 (or lower). That’s what worked for me after encountering tons of issues.

@pigfloydbbq 9 месяцев назад

The Mr. Rodgers of Flipper Zero 🤘😎🤘

@ModernBroadcast 9 месяцев назад

Won’t you be my neighbor?

@pigfloydbbq 9 месяцев назад

@@ModernBroadcast awesome dude.. Enjoying it.

@Omikoshi78 Год назад

I like your opsec to hide your fingerprints with the gloves :)

@ModernBroadcast Год назад

Lol ya got me

@AlexMMayhew Год назад

Love it! Ordered my flipper with wifi board a couple days ago... One thing.. if you 3D printed the case... Why not make the case black like your flipper... And I didn't know they made them black!

@ModernBroadcast Год назад

Nice! I did 3d print the case but all I had was white PLA. I have a white flipper also, but I don't use the wifi board that much. The only way to get a black Flipper was by backing the project on Kickstarter. Its a real neat device :D

@PanicAcid Год назад

Sometimes for quick and dirty prints you've just got to use the roll that's already open / already on the printer.

@Global_News_UK Год назад

This is the best step by step guide Thanks so much Appreciate it Keep it up

@ModernBroadcast Год назад

Thank you for the kind words, have a great week!

@Global_News_UK Год назад

@Modern Broadcast i have tried to install it again but I get error messages And it me me me work, Do you have any advice for mem

@Global_News_UK Год назад

@Modern Broadcast i have tried to install it again but I get error messages And it me me me work, Do you have any advice for mem

@Global_News_UK Год назад

@Modern Broadcast i have tried to install it again but I get error messages And it me me me work, Do you have any advice for mem

@Global_News_UK Год назад

@Modern Broadcast i have tried to install it again but I get error messages And it doesn't work, Do you have any advice for me

@sideswipe147 11 месяцев назад

Good to know it does NOTHING out of the box. Having looked into it a bit I am glad to see that the flipper is really a good tool that is mostly useless to people without a fairly larger level of knowledge about computers than most people possess. Seems like a great tool but only if you know enough to get it working in a powerful way. Which is great. Many people may buy them but most will not know how to use it so it will sit on a shelf collecting dust.

@Canelaw-ns6hx 8 месяцев назад

yeah it's important that people with these tools have the knowledge and understanding necessary before they ever actually use it. like uncle ben said.

@Sophistry0001 7 месяцев назад

It's an opportunity to learn tho at the same time if someone has the interest. It seems like a RF/digital multi tool

@sideswipe147 7 месяцев назад

@@Sophistry0001 but honestly if you know what you are doing you really don't need one

@Sophistry0001 7 месяцев назад

@@sideswipe147 "need" is a funny word. Nobody "needs" one. We need food, water, shelter, and companionship. I don't know what I'm doing, but I want one so I can goof around with it and learn. And the price point is cheap enough that it moves the bar for entry fairly low.

@antoinejackson4311 6 месяцев назад

I went through the flashing process and saw everything on the video. But when I connect to my flipper and go to GPIO its a different screen. Its asking for USB-UART Bridge / GPIO Manual Control / 5V on GPIO (on/off). What am I missing?

@SulfuricDrop3 5 месяцев назад

does the same for me i have no idea why

@ModernBroadcast 3 месяца назад

You need to go to “apps” first then GPIO

@gtheentreprenerd7207 Год назад

Wal-Lahhhh 🙌😇🙌 It worked and got it installed After a couple hiccups- ig I just didn't hold down the button long enough 🙃 Thank You!

@ModernBroadcast Год назад

I'm glad you got it to work! Play responsibly my friend :D

@deontawilliams3131 5 месяцев назад

I did everyrthing and it went smooth but my flipper isnt picking up any networks with the devboard plugged in, any suggestions?

@ModernBroadcast 3 месяца назад

Try resetting the flipper if still not working try reflashing

@OriginalDecurse Год назад

this video is great, i love the music btw over all just a super solid video thank you

@ModernBroadcast Год назад

Thanks Glenn! I hope you have a great week!

@nancytopete6474 Год назад

Great info! also really like the music.

@ModernBroadcast Год назад

Awesome, thank you! Have a great week!

@speedbird737 Год назад

INCORRECT!!! @ 02:01 you have to line up the pins and push gently until the board is flush with the Flipper Zero. Its connected correctly when pins are no longer visible.You have only partially connected it and its prone to falling out they way you show here.

@ModernBroadcast Год назад

Good morning speedbird. You are correct it was not connected at that moment I was just showing them together in my hand. Thank you for your keen eye and I hope you have a good day

@Drago_Esports 8 месяцев назад

someone help it just says "the log is empty! :("

@borenus4885 8 месяцев назад

I do all the steps you do, but when I go into my flipper, i dont have all of those GPIO options??

@SQUeeK1984 7 месяцев назад

Might have to get the unleashed firmware

@pedrosanchezdeljuarez4100 6 месяцев назад

Have you fixed it?

@ModernBroadcast 6 месяцев назад

As @SQUeeK1984 has stated it might because I have the Unleashed Firmware. If you're running Stock you'll have to find the .fap files for each on and be sure they work on Stock firmware.

@SQUeeK1984 6 месяцев назад

yes sir @@ModernBroadcast ! it's definitely the firmware he needs to install.

@mikecianfrocco1250 6 месяцев назад

Will this work with xtreme firmware

@avgeekforlife7604 5 месяцев назад

For anyone with a problem at the part where you plug in and flash it , make sure that your cord can transfer data because some cords only power things

@clothstrangler 3 месяца назад

Thank you so much for the clear and precise video

@ModernBroadcast 3 месяца назад

Thanks! Glad it was of use! Have a great week!

@sarahhornbuckle9398 Год назад

How did you 3d print a case? I've thought about getting a cnc machine. Can you tell me what a 3d print machine can do? Great video thanks

@ModernBroadcast Год назад

I found this design on Thiniverse a site with tons of 3D designs and models for printing.

@sltyboi Год назад

3d printer does the opposite of your cnc instead of removing it’s adding

@mattmunhall8372 9 месяцев назад

I have flashed my dev board with the application how ever when I go and plug the board into my Flipper the Marauder app does not show up any where. I am currently running 0.94.1 on my Flipper. Thoughts on why it wont load up?

@AceXSR 4 месяца назад

you need to install the application for marauder. Id recommend just downloading the momentum firmware as a whole because they have it included. There should be tutorials to do this but the process is pretty straightforward. Hope this helps

@V0lch3bnik Месяц назад

I did everything up untill pluging the devboard into the flipper. When I do the files in GPIO dont show up. After the download, I close the window, plug the devboard out of my pc and into my flipper. what could I have done wrong?

@TheGeekiestGuy Год назад

Right on. I just got my board in. It's always good to get a tutorial before you accidentally let the magic blue smoke out. I dig the background music, btw. Good stuff. 🤙🏽

@ModernBroadcast Год назад

Thank you for the kind words. A lot of people dislike the music unfortunately.

@colbybryant8418 Год назад

@@ModernBroadcast do you have to keep it plugged in whenever you want to use it or only when you download it and get it working

@ModernBroadcast Год назад

@@colbybryant8418 only for flashing the firmware

@jazzmoney4520 20 дней назад

It tells me that a Fatal Error occurred. Failed to connect to esp32-s2 . No serial data received.

@sarahhornbuckle9398 Год назад

Would you make that case & sell them? That could be awesome!!!

@ModernBroadcast Год назад

Since the design is not my own it’s heavily frowned upon in the 3D printing community to sell others models

@jonathanshivel1302 Год назад

How about make me one? Lol for a tip

@ModernBroadcast Год назад

I can print you one for sure DM me

@jonathanshivel1302 Год назад

@@ModernBroadcast thanks I will

@jonathanshivel1302 Год назад

@@ModernBroadcast I honestly don’t see how to dm you

@ih4t3youall 8 месяцев назад

Hey thanks! , and you put all the links! really appreciate that!

@ModernBroadcast 8 месяцев назад

I strongly suggest you check my newest video as it is WAY easier now

@ceh2600 4 месяца назад

I got 6 options 1. Flash Marauder (no SD mod) to Devboard 2. Flash Marauder (with SD mod) to Devboard 3. Save Flipper Blackmagic WiFi settings 4. Flash Flipper Blackmagic 5. Download USB UART Drivers (Silicon Labs). 6. Update Marauder BIN file (v0.13.6 included) Not sure if I should go for 1 or 2 ?

@ModernBroadcast 4 месяца назад

Does your board have a micro sd card slot? If yes 2 if not then you want 1

@Taormina13 8 дней назад

I was having trouble trying to get it to work, when I extracted the zip file it showed Flash but not flash.bat so I was thinking that why it wasn't working. If you could help me I would appreciate that. Thanks.

@LuxGamer16 8 месяцев назад

dont know if anyone pointed that out ( looked in the comments, but didnt see it) but you misspelled marauder in the title. Unless that was on purpose ofcourse. Nice video nontheless!

@ModernBroadcast 6 месяцев назад

LMAO no, no one has pointed this out and its gone SO LONG without notice xD Thank you!

@adamr4503 Год назад

i followed all steps but when i go to applications on my flipper and then GPIO, i don't have the option of ESP32 Wifi Marauder. All i have is AVR Flasher, DAP Link, Signal Generator and SPI Mem Manager

@ModernBroadcast Год назад

These applications need to be added to the flipper or if you’re using unleashed it come preinstalled

@Vyasvyas8 Год назад

@@ModernBroadcast can you please share a link how to add ?

@ModernBroadcast Год назад

@@Vyasvyas8 Yes I think I'll make a video on this very aspect as I've gotten a few questions on it. Or maybe a short on the topic as idk if it's enough for a full video.

@MartianMoon Год назад

@@ModernBroadcast +1, could really use help with that!

@ModernBroadcast Год назад

@@MartianMoon will do. I’ll make that this Sunday video.

@raymondpacheco5447 7 месяцев назад

Hey man just got my flipper and dev board. I updated the board but when I go to GPIO i dont have those options. Im assuming there is some firmware I need to add to my flipper to get that? Sorry if stupid question. New to this.

@ModernBroadcast 7 месяцев назад

Hey welcome to the party! No such thing as stupid questions, you’ll want custom firmware for sure. Personally I use Unleashed but people love Xtreme and other ones floating about. Once you have the custom firmware these options should show up for you.

@numzy1365 Год назад

Do i need first to update the original firmware from the docs site of the flipper zero, or it doesn't matter and i can directly start flashing it from the murader ( i'm talking about wifi dev board directly out of the box, can i directly flash it with murader firmware or i need first to update the original firmware from the flipper zero docs)...

@ModernBroadcast Год назад

No you do not need to update with the original firmware first.

@numzy1365 Год назад

@@ModernBroadcast Thank you for the fast response, be safe

@ModernBroadcast Год назад

@@numzy1365 absolutely have a great weekend

@fray_way6425 Год назад

best tutorial yet ty sm homie

@ModernBroadcast Год назад

Haha thanks! Have a great week!

@ScreenY Год назад

dont connect and keep failing Failed to connect to ESP32-S2: No serial data received.

@ModernBroadcast Год назад

I’m not sure why. It appears half the viewers get it to work following the video and half don’t. I’ve tried flashing mine again and it works. Hopefully someone in the comments section has found a cure.

@user-yk2ko4oo9r 10 месяцев назад

DEVBOARD FAILS TO FLASH after adding the murader. Did the whole "hold reset and reboot at the same time, released the reset button then the boot button after it being connected and nothing. - Also flasher marauder has script 1-5 not 1-4. Still pressed 1 + enter and now when I plug in dev board the red light no longer appears and when I go into GPIO all I see is: USB- UART Bridge, GPIO Manual Control, and 5V on GPIO. Care to help? Thanks!

@lexuscrow1932 8 месяцев назад

I can't help you. But I suggest trying to ask GPT 4 and even get it to do research for you online on your hardware and dev board so that it understands what it's working with

@K0RAXX Год назад

Why does it say "esptool.exe is missing" when I plug my board into PC? (Please download and extract full package)

@ModernBroadcast Год назад

That’s a good question, are you on windows?

@K0RAXX Год назад

@@ModernBroadcast yes I am!

@ModernBroadcast Год назад

@@K0RAXX that’s bizarre have you done a Moogle search on this to see if there’s an application you need?

@K0RAXX Год назад

@@ModernBroadcast sorry I'm unfamiliar with Moogle searches.. also what application might I be missing.. 👍

@ModernBroadcast Год назад

@@K0RAXX Moogle is just Google. And I was just wondering if you did a search looking for the .exe file you’re missing

@cash9551 Год назад

THANK YOU SO MUCH I thought I wasted my money

@ModernBroadcast Год назад

Glad the video was able to help :D

@atm_tk3 11 месяцев назад

This is a great tutorial and I just got my flipper but when I plug the dev board into my flipper I cant find the murader on the flipper so I was wondering if you could know the issue

@ModernBroadcast 11 месяцев назад

You’ll need the companion app Wifi Marauder on Flipper Stock ru-vid.com2xjJQyG5aBE?feature=share

@elliott972 10 месяцев назад

hmm. mine doesnt scan anything, justt says to hit back button to stop scan

@MentalMarathon_ 4 месяца назад

That gui eating popcorn 😂😂😂

@ineedbobux4521 6 месяцев назад

ive got a question how can i plug this thing in to flash cuz my cable that came with the flipper doesnt fit

@ModernBroadcast 6 месяцев назад

You’ll need a type c to usb a or if your computer also has the small plugs you’ll need type c to type c

@zsoltibitter8761 7 месяцев назад

Can the flipper with this dev board do packet injection? I am a bit confused but i am starting to realize that the answer is not.

@wedoit6035 5 месяцев назад

i did the exact thing but it wont show up on my gpio, installed fine whats missing?download shows done correctly

@ModernBroadcast 5 месяцев назад

Most likely you’re missing the .fap file

@victortorres1585 10 месяцев назад

Solid video it worked to the t up you have my subscription

@ModernBroadcast 9 месяцев назад

Thank you kindly for your subscription

@bandino1990 2 месяца назад

i followed all the steps, when it came time for me to enter 1 there were 6 things that popped of instead of 4. it connected but it not letting me scan for the wifi lists

@ModernBroadcast 2 месяца назад

Typically this is due to a firmware mismatch, but there are like 8 different possibilities why its not working. best advice is to update Flipper Zero, Firmware, Reflash, Try again.

@EliasGambit 11 месяцев назад

the flash thing installs just fine but the wifi devboard doesnt show up in the GPIO folder

@ModernBroadcast 11 месяцев назад

You’ll need the companion app Wifi Marauder on Flipper Stock ru-vid.com2xjJQyG5aBE?feature=share

@tempestkupo5151 8 месяцев назад

Followed step by step and when i plug in and open Wifi Marauder it says "Error, Load Failed" and "Update Firmware to use with this Application"

@ModernBroadcast 8 месяцев назад

I just made a new video this morning of a simpler method

@SuperRebstar 11 месяцев назад

I can't seem to dev board to be recognized in windows 10 to use the flash.bat I downloaded the ESP 32 driver which windows won't recognize. Am I missing anything? I held the boot button and still nothing

@steveng2488 8 месяцев назад

Did you ever figure it out

@user-fv8cf9pi1x 2 месяца назад

I just barely got the Dev board, but I have a PC and when I plug it in, it doesn't appear on the PC. Am I doing something wrong?

@ModernBroadcast 28 дней назад

hold the button for 3 seconds then let go as you plug it in. Its picky and finicky

@user-fv8cf9pi1x 13 дней назад

@@ModernBroadcast thank you so much, it started working now 🙏

@alloy520 9 месяцев назад

Love the Jazz.

@ModernBroadcast 9 месяцев назад

See that’s what I’m talking about. Unfortunately a lot of people don’t like the music so there’s no more music in my current videos

@RichardsWorld 4 месяца назад

it doesn't need an antenna?

@ModernBroadcast 4 месяца назад

It doesn’t need one but there are other boards with antennas and the range is much better.

@filipvlastnik2716 3 месяца назад

i plugged dev board into flipper and it shows me nothing in gpio..

@ModernBroadcast 2 месяца назад

update everything Flipper, Firmware, Reflash, retry.

@rj8868 8 месяцев назад

i have flashed by wifi board and plugged it into my flipper, but i do not see anything under GPIO. any suggestions?

@ModernBroadcast 8 месяцев назад

It sounds like you’re on a firmware that doesn’t come with the .fap files installed like unleashed or others. I made a short on this topic and it should hopefully get you in the right direction.

@rj8868 8 месяцев назад

Thank you so much! I installed Roguemaster and it all worked. Thanks again! @@ModernBroadcast

@ponyecuatoriano6210 10 месяцев назад

Friend, I already tried that procedure but it comes up empty, the board

@ModernBroadcast 9 месяцев назад

Try this: Wifi Marauder on Flipper Stock ru-vid.com2xjJQyG5aBE?feature=share

@mrmurr278 Год назад

so you can use this without having the flipper plugged into an android/PC?

@ModernBroadcast Год назад

I've seen people use it that way. However that's a bit above my skill level so I wouldn't know really how to help navigate that.

@onebutnottwo9980 7 месяцев назад

im having a little issue, as i did the option number 1 is gave off a fatal error telling no No serial data received

@ModernBroadcast 6 месяцев назад

Others that were having this issue was because they did not hold the button long enough when plugging in the computer.

@skilletfingerz7380 Год назад

Why is “hacking” if that’s what you call it so much easier and less confusing then I would have first assumed

@ModernBroadcast Год назад

Scary isn’t it?

@Niergends 9 месяцев назад

I don't know why but everything works but as soon as I open gpio there is nothing there. it's all empty

@ModernBroadcast 9 месяцев назад

It sounds like your on stock firmware. I’d flash your Flippers firmware to something else first but if not then you need the Companion App. I did a short about it.

@masonpowell2499 Год назад

every time I enter “1” it says “ cannot configured port, something went wrong. Original message: permissionError(13, A device attached to the system is not functional. ‘ , none 31). [9688] failed to execute script ‘esptool’ due to unhandled exception! “.

@ModernBroadcast Год назад

Hmm this is a first. Did this get resolved or still ongoing?

@kapone2k 11 месяцев назад

Why do I end up with empty Pcap files ? .. Everyone seems to know but no one wants to tell.. or no one knows but say that they know how to solve it.

@LinkedWish Год назад

Great video! Could you add a link to the STL file for the case you printed for the wifi board? I'd like to print one as well for mine.

@ModernBroadcast Год назад

Hey thanks! Here’s the STL link! Have a great week! www.thingiverse.com/thing:5798965

@LinkedWish Год назад

@@ModernBroadcast Thanks, you too!

@user-uo6jz9ks2x 3 месяца назад

Bro, you are my hero🤩

@ModernBroadcast 2 месяца назад

Thanks for the kind words! Have a great week!

@Quantum-guy 11 месяцев назад

i did what you said but now my wifi board doesnt work anymore and just lights up in rainbow when i press the reset button and when i try to start a app that needs the board my flipper crashes Pleas help

@ModernBroadcast 11 месяцев назад

Sounds like it didn’t flash properly? I would go through each step again carefully and attempt to re-flash the board.

@freak_hacks 5 месяцев назад

For some reason I cant see the wifi AP's in marauder

@ModernBroadcast 3 месяца назад

I’ve heard a few people mention this now. I’d say restart the flipper or reflash the firmware

@siggi1821 3 месяца назад

hey i was wondering for me its with sd card and no sd card wich one should i use ?

@ModernBroadcast 3 месяца назад

Mine doesn’t have an SD card slot but if yours does you can dual boot example: Marauder and Evil Portal.

@siggi1821 3 месяца назад

@ModernBroadcast hey I got it working but deauth does not work

@reviewithme9913 3 месяца назад

What if the status light indicator does not light up? 😅

@ModernBroadcast 3 месяца назад

That doesn’t sound good. Sounds like you might have a dead board.

@rpplayz135 3 месяца назад

hello, i have a dev board that doesnt have plug in just sd card? can anyone help do i have to flash the sd card? thanks

@ModernBroadcast 2 месяца назад

I've heard yes. and with a SD card slot I hear you can also dual boot however I don't know how.

@estephenrivera380 2 месяца назад

is there a video for mac? i can not figure this out.

@ModernBroadcast 2 месяца назад

I need to make one, but yes you can do this with a mac just different steps.

@Ptsd_Boi Год назад

Everything matches up until I go into GPIO, I don’t have the application on the board though it said to downloaded the program

@ModernBroadcast Год назад

You’ll need the Companion App which is a .fap file. I link it in my short Wifi Marauder on Flipper Stock ru-vid.com2xjJQyG5aBE?feature=share

@aaronnettles5500 Год назад

Why does it say “1 selected, 0 unselected >” when I select and save the wifi from the list? It doesn’t save and all I can do is go back

@ModernBroadcast Год назад

That is bizarre. Does anyone have an answer to this question?

@KooLaidStudios Год назад

Thanks bro I been wondering how to use it lol

@ModernBroadcast Год назад

“OH YEAH!” (Sorry I had too when I saw your awesome name) I also often wonder how to use this little device lol. Glad the video helped have a great week!

@user-jl7iq3kg9g Год назад

You said the flipper has Marauder on it already before even flashing the wifi dev board? I couldn't find it on before or after flashing the board with this method? Is there a step prior to all of this?

@ModernBroadcast Год назад

Since I had the unleashed firmware on my flipper it comes with Marauders .fap file pre-installed. You’ll need the “companion app” which is the same .fap file to get the program to work. I talk about it in my YT short

@Luke-fc4px Год назад

I've installed multiple drivers for the dev board, I hold the power on button before connecting, tried multiple cords and USB ports, still can't get it to be recognized on my windows 10 desktop... any ideas? I'm going crazy. Maybe it's broken?

@ModernBroadcast Год назад

It’s rare but not outta the question for a faulty board. What I’d be more concerned with now is “installed multiple drivers” it’s possible they could be conflicting with one another or causing other problems.

@RealGreaseMonkeyGarage 12 дней назад

wish a linux version existed love my flipper but without windows im unable to use my 50 dollar wifiboard

@heavymalikcaos1329 4 месяца назад

Help the flasher says esp. Exe missing

@jesseschers9566 8 месяцев назад

Im now at the step where you open the flash 4:23. But it has a newer version: v2.50 and now 5 options instead of 4. Do I still need to try again with the boot button or do I have to chose one of the 5 options?

@jesseschers9566 8 месяцев назад

Okay so it worked. You just need to press 1

@user-qx9qe3nr7y Год назад

Quick question. If trying to download the zip file results in a new github page with a 404 error code what should I do?

@ModernBroadcast Год назад

Go back a page and it’ll be listed as a zip file there

@alc202 Год назад

thank you, this was very helpful

@ModernBroadcast Год назад

Glad it was helpful!

@MiloTheducka 10 месяцев назад

PLEASE HELP when i do ap scan i get a blank screen what do i do?

@user-dc7pr3ec4g Год назад

My WiFi is no longer lit and there is a problem with the firmware. May I know how to reset it? Thank you

@ModernBroadcast Год назад

If you encounter an issue with firmware, simply re-flash and try again

@donvlogs7001 11 месяцев назад

How do I rub it in applications on my flipper it doesn’t pop up murader but it’s installed on the dev board

@ModernBroadcast 11 месяцев назад

You’ll need the companion app Wifi Marauder on Flipper Stock ru-vid.com2xjJQyG5aBE?feature=share

@donvlogs7001 11 месяцев назад

@@ModernBroadcast thanks I’ll check it out and see if it working now

@donvlogs7001 11 месяцев назад

I’ll pay you to walk me through the process I still cannot figure out what I’m doing wrong 🤦‍♂️😂

@ModernBroadcast 11 месяцев назад

@@donvlogs7001 lol do you have discord by chance? DM me on there and we can schedule a time to take a look

@donvlogs7001 11 месяцев назад

@@ModernBroadcast yes I got discord

@Kenji-wi4ib Год назад

When I get to GPIO, the Wi-Fi Marauder option does not show up. I did the step at 4:30, and it worked. Do you know what is wrong?

@ModernBroadcast Год назад

You’ll need the companion .fap file. Here’s a short I did on the matter. Wifi Marauder on Flipper Stock ru-vid.com2xjJQyG5aBE?feature=share

@fadevill Год назад

Would I also have to have the same software in my flipper or just the wi-Fi board?

@ModernBroadcast Год назад

The firmware would get loaded into the Wi-Fi board. You’ll then need the .fap file for it to work on the Flipper Zero

@adventurelogs 9 месяцев назад

Mac instructions, PLEASE. IDK how to get the initial Marauder screen. I'm generally pretty tech saavy (linux/mac/windows/R-Pi) but this is making me feel pretty stoopid lol

@Oxxygen_io 7 месяцев назад

Your avatar looks like the older brother of code bullet 😅

@ModernBroadcast 6 месяцев назад

I get this all the time, I would LOVE to do a collaboration with @CodeBullet very talented content creator and would just be fun.

@codycabral8915 Год назад

i did everything correctly but when i put my dev board into the flipper none of the new options were there do u think u know why?

@ModernBroadcast Год назад

Sounds like you need the Murader Companion .fap file. I talk about it briefly in my YT Short ru-vid.com2xjJQyG5aBE?feature=share

@15youngblack Год назад

I'm getting an error saying 'Preload failed API version mismatch.'

@BlackneeedWasHere 9 месяцев назад

Update the firmware of the flipper zero dev board

@Keitdhd 8 месяцев назад

Is it ok if you buy it on Amazon? And do you need the wifi dev bored I’m getting one but the dev bored is coming in a week or more

@ModernBroadcast 8 месяцев назад

I’m not sure the question here. Is it okay to buy the dev board on Amazon? If that’s what you’re asking yeah you should be fine it’ll come in a box with some padding and should be good to go.

@Keitdhd 8 месяцев назад

@@ModernBroadcast lol thank you I was talking to some one while typing this so my fault for not making clear sense and great video

@ModernBroadcast 8 месяцев назад

@@Keitdhd lol I do the same thing at times. Glad you liked the video!

@samerhayek253 Год назад

I get to 5:05 and thats when trouble starts. I don't see any of the choices you have. I even kept the board plugged in when I connected it t the flipper. Any suggestions? I appreciate your work.

@ModernBroadcast Год назад

If you don’t have the Wi-Fi murader fap file showing check out my RU-vid short where I show where to get the Companion App

@samerhayek253 Год назад

@@ModernBroadcast thanks I think I got it.

@ModernBroadcast Год назад

@@samerhayek253 that’s awesome! Gratz on getting it!

@bojjeds3921 Год назад

i did all tutorials my flipper zero CAN NOT DETECT MY DEV BOARD WHEN PLUGGED IN. im going crazy ive been trying every guide for 2houres & hhalf now ;...........

@ModernBroadcast Год назад

You’re holding the boot button before plugging in and continuing for 3 seconds?