Flite Test - Tricopter Tips - FLITE TIP 

Best episode so far! I spent many hours at David's site looking at build descriptions and all his crazy (but fun) projects. Worth a look.

Thank you RC Explorer for sharing so much great information. We do appreciate it.

Another great show! thanks you guys!

Thank you guys. As always nice show.

Awesome. Thanks for the link, I'm on there now looking around. This is so cool now I have another use for my DX8

Great video! Very useful information for a tricopter novice like me. David is the tricopter guru. His site is loaded with useful stuff on building tricopters.

YET AGAIN flite test with another crazy awesome vid. great job guys! keep them coming

Another great show! very good thank you ...

great work ,.

This was so helpful for me. Thanks guys!

Yeah, that site is great. I was able to find out all I need. Thanx

NIce episode guys!

Another great clip. Interesting stuff. I see you guys are getting the bad weather we are getting here in canada as well!

On a quadcopter/hex/octo you would test yaw/rudder by rotating it and the motors rotating the direction opposite of the way you rotate it should speed up. For example, if I yaw it by hand clockwise, the motors spinning counter clockwise would speed up. Correct me if I am backwards, but I think this is right. I am going to test it on my quad tonight.

It's weird watching this stuff from 9 years ago, alot has changed.

Multimad mean and mad, David är fan bäst

david the swede... wow 2011, you guys sure have come a long way these last few years

Great Video! I love this thing. Can you get a copy of the parts list please?

$15 now! for the version 2. cant believe the values those guys put out. amazing.

Now I wana NOTE there is a NEW beeper called VIFLY AND had a built in batt u plug into the TX if u lose link, toss a batt, ANYTHING it will beep up to 100 decibel and has light, even a sensor to stop beeping after sunset so it can beep again in the morning! A must have! @flighttest u should carry this or make one!

woooow i liked the new intro

Sir Big fan

+Daan van gorp I would recommend the Turnigy 9X. Great radio, and cheap. You can get from HobbyKing

Could you guys do an in depth video about flashing ESCs and flight boards for multi rotors. I am new at the hobby and can't find a really good resource for ESC flashing information.

I am a late commer to the series, but have seen most and built several this winter. I am retired with a lot of time on my hands and BAD Hearing. The Turnigy BSEC Programming Card is a must when programming the Speed Control. I built the Tricopter and am waiting for the Programming Card. Hobby King has great prodicts but the shipping is terrable, even from the US warehouse.

I've been correcting all of my friends to "siptie" now :) Windestal ownz

Rather than balance motors by adding more weight you may consider using a dremel and sanding very small amounts of the motors bell housing off. I cannot stress "very small amounts" enough but once done there is no slippage and overall you may shave a few grams from your total weight instead of adding to it.

you should do an interview with b1 bob and his thunderchief, that would make a good episode!

If your servo has the jitters lower the p&i gains on the rudder (yaw) and I did mine 5 at a time

@shebotnov TriCopters fly smoother and allow for a wider field of view for the camera.

I really don't know anything about this very cool hobby other than watching vids. I am wondering if a design that pitched all three rotors toward the center would increase speed, response and stability.....

do you have an older video where you actually do the motors and blades balancing?

what is the little piece that link the unmoving part and the moving part of the motor on the tail ?

What kv motors do you use and what size props I want to build a tricopter and I will use this platform

@TheGrabist you can buy a HK kk board for $30 and program it with tri film ware. thats what i did :)

One more... make sure you install your stabilization board oriented properly. I put mine in at 90 degrees once, and as soon as you turn on the throttle it tries to correct itself by flipping upside down!

Who still loves tricopters on 2021?

multimad Your super cool

Those giant FPV antennas of yesteryear. 8^)

Sooo in davids v1-2 plans he cut out motor mounts and now he has the motors mounted directly on to the wood spares. He also has the yaw servo moved vertically underneath the arms. Is there any benefit for this? The ESCs are close to the props is that to help cool them, is that needed? i assume he does this for a reason of better performance

Good work guys. The whole tricopter is really getting too me. But i do have one question, cause i'm pretty much a novice, if i build such a tricopter, what remote do you recommend ? How many channels, wich frequence and which button's to have full control over the vehicle? Bear in mind i'm only a poor student so my budget isn't that large. thanks! :)

How does this tricoptor pivot or deal with gyroscopic forces or drag?

That Tricopter is So neet, are there any plans to make it with, Take care and have fun, Chellie

hi guys,,,i just built this tri using 2204 12a simon k esc andopenpilot cc3d....I follow exactly as another video ,,,,but when i maiden it it hoovers fine.....when i add alittle throttle it just flip and fall....where did i go wrong????tq

What did the tricopter scene look like before david came along?

VERY COOL BUT CAN U PUT GPS ON A TRICOPTER IF SO WOULDNT IT HELP FLYING IT ...LOVE YOUR VIDEOS

Hi guys. I have a problem on my tricopter. The servo on the tail. Jitters badly. I have played with the PID's and servo filter to no avail. I was wondering if David has some experience on this or additional tips? I am on a multiwii board from readytoflyquads.

I notice that most people don't describe the difference between the p gain and the i gain on gyro gain adjustments. Can you describe the difference between the two?

What size frame was that in the video thanks

Dude with red cheeks has a name. Its David. He is from sweden and he is awesome.

can we please have a video on exactly how to set up the KK2 board, my bat bones rudder (prop tilt) still wont work... :(

David come back!!!

How come he hasn`t demonstrated the Swedish slapping method yet? heheh GR8 stuff guys.

metric is so easy, its the way of the future

Where can you get a KK board?

Where can we get the KK board now that David no longer has them?

Great Video......what's the deal with the background noise ???

"Sip-tie"

Click on our name below to view and purchase the "Windestal" frame parts pre-cut and even comes with the bolts! Then visit rcexplorer.se for davids electronic parts recommendations! David Windestal has given us permission to sell his "Windestal" tricopter Glass Fiber parts in g10 material.

better quadri or tricopters then? in therms of flying...

Which tricopter is that And where can I buy one

Go Dadde =) And Sweden

What gyros? Funny how far we've advanced since then.

My tricopter is not flying and it's rotating is this because of gyro how can I solve the problem

0:32

Sip tie

@CHELLIE2408 he has great plans at his site rc explorer :)

@UtRadioGuy They have probably saved you way more than that with their cheaper prices.

no way this is 9 years old now. time fly's, pun intended.

like

@TheGrabist Google (KapteinKuk) And you will find the plans :D

@epet52, google?????... geez...

O, jea! Props realy hurts! Once got 12x4.7 prop in fingers form quadcoppter because of wrong Gyro settings! Be aware!!

@gjferg - I found out today thy are doing business from a UPS store, and haven't picked up any mail in weeks. That's good business. I'm just doing my best to get their attention. If I took your money and just gave you generic answers you would be pissed & try to track me down.

@USAFA21 Hobbyking $25

@UtRadioGuy You have posts up everywhere about it? Yeah, I think I read a few. Not trying to flame you but why don't you just make an anti-HobbyKing rant video or something. HK is a crap shoot, but you can't beat the price. When ordering from them, if it's insurance you want, my suggestion is buy two of whatever. It's probably cheaper than buying just one anywhere else. Please don't make everyone's mention of HobbyKing your personal complaint line. We all know the service (and QC) is substandard

haha "you US guys" XD

Really? I had a broken lipo after first charge, sent them a picture, and got a full refund within 12 hours... Had props missing from a quad RTF kit, they replied and sent out new within 24 hours..

it's pronounced seeeeep tie.

Don't EVER send anything back to Hobby King! They will rip you off. They got me for $63.00. I've tried everything to work it out with them, and nothing. All I get is check back later. I have posts up everywhere about it, and still nothing. They could care less about the customer. I left this here because HK supports you.

pretty sure hes got a wife lol.

David is looking like a dork

Great info, but what a shame its spoilt by the bloody awful background Muzak and the twitching zooms. Frame the shot and LEAVE THE ZOOM ALONE!!

Thank you guys. As always nice show.