Just finished my RP3 float rebuild in 2024. So glad this is still up. For anyone doing this rebuild in 2024, the kit that I bought on Amazon with the number 803-00-142 had all the pieces including the lubrication. There are some kits out there that have a picture of the lubrication as being included, but only the one from fox included it. There is a bump shock O-ring that is not included in this pack. My original was broken, but still serviceable as it would stay in place. If this O-ring has shredded to pieces, you will need to get the entire shock service by fox to replace it. Hope this is helpful to anyone else still running a RP3 or 23 vintage shock and big thanks to the original poster for leaving this video up!
Just rebuilt my RP-3 Shock for a 2009 Specialized Stumpjumper FSR Elite exclusively using this video. I had never done it before. 90 mins later, I had successfully rebuilt my shock! Awesome video with spot-on guidance!
@CHOOKSable 1- Let all the air out of the shock. 2- Grip the bottom section of the air sleeve and turn counter-clockwise. 3- When you get to the last thread, simply pull the air sleeve off toward the back of the shock. ( it may have a little suction like feel, this is totally normal ). 4- Once the air sleeve is off, clean and re-lube the seals, then reinstall the air sleeve.
My bike has been seating in the corner of my room for a long time and was worried about the rear shock servicing. I'm happy and franckly shocked (no pun intended) how that's an easy and cheap process anyone can do at home! Thanks Fox for this!
I've just done this service great video thanks. For those about to do this though, remember you need to remove the shock eye bushing mounts from each side before you start!
Great video - didn't know it was so easy. I rebuilt my Fox Float R racing shox in about 15 minutes with your video. Without your video, I wouldn't have known where to start. Thanks for your help.
Great how to video. This service was overdue on my bike. This made it easy and affordable to do myself. The only mildly confusing thing was the large o-ring placement in the top of the main shock body. It needs to fit into the recess above the threads. thanks for posting!
@@richardhayter3919 first of all, that was an odd question for the sake of being confrontational. Secondly because if he was a pro his shock wouldn’t have never lasted 10 years. Does that answer your question? Any more pointless questions you need help with?
Great video and step by step. Only hiccup i had was that one of the split-ring backup rings got a bit stretched when i put it on and wouldnt close right, making it impossible to put everything back. I had to "reshape it" a bit in order to get everything to get seated again. No more stuck down shock! :)
Yeah, 8-40 months makes more sense to me... for us it has been when the shock stops holding air well. We ride year-round on PNW wet/muddy trails and the FOX rear shocks have held up really well for a long time between seal replacement.
Thanks for posting this, i was loosing air in my shock and I think this rebuild did the trick. Hardest part for me was at the 3:30 mark getting that o-ring out. I ended up stabbing it with a safety pin to peel it out.
Thanks for the how-to. I bought a 1999 Specialised FSR last month and am studying how to service and maintain it. ( But I haven't ridden it yet, due to a lack of nerve... soon, soon! ) I haven't checked the Fox shox yet- they seem to be in good shape, and may be originals from 1999... :-)
I'm embarrassed to say that I haven't serviced my shock in 7 years! Up in Canada, our riding season is shorter, but that's still a lot of neglect on my part. This video made the job a breeze. Surprisingly, all the old washers were still in good shape and the shock had never lost pressure. I just bought a new bike, and made sure it had Fox front and rear. It's expensive, but I think it's worth it.
Make sure you are twisting the very bottom section of the air sleeve (what he said below). On my RP3 there is another section of the air sleeve that will spin forever without unthreading anything.
Rebuild frequency = 8-40hrs? Ya fucking right.... that's twice a week for me. What about doing a muddy 24hr race? I got to stop and rebuild my shock three times? LOLOL
I ran into the same thing. In my case the o-ring in the air chamber fell out of place, and when I screwing the whole thing together I pinched it. I also had the issue with the rebound not being nearly as slow as on the video, and I suspect my attempts to get it in got let the ring fall out.
@Roger161 : Just got done changing the seals today. Super easy ( 10 minutes ). My shock is dialed for some airtime at my local dirtjump park ( Calabazas ). Ride on !!
just a few minutes of info makes all the difference, just about to venture into the world of full-sus having ridden hard tail my entire life; maintenance has always come fairly easy to me, but shocks scare the sh*t outta me, 15 minutes EASY maintenance - thanks for the video!!
Great Video ! My Triad shows the signs of a "stuck down". I have purchased a seal kit, just waiting for it to arrive. I have stripped the unit as per your clear instruction and note that the small o'ring is damaged ie) the small o' ring in the positive chamber on the smaller shaft. Should this be sent to a specialist ?
I ordered a shock pump & rebuild kit. I thought I'd humour myself by pumping up my old blown shock and WHAT DO YOU KNOW... Solid seal - shock not screwed. Then I figured, "Hell, I have this new seal kit, might as well use it!" So I replaced the seals, AND NOW ITS NOT AIRTIGHT & AIR IS COMING OUT OF THE VALVE!!! Fuck this shit.
I had the same problem, turned out i had the o-ring in the wrong spot. I had to stretch it out a little to make it stay in the groove while i screwed the body back together.
All i want to ask is (after servicing my shock with this video which is brilliant) why does the Fox website say not to do this yourself and to send it away to do at a cosy of £90
I had a really hard time getting that seal out of the sleeve. The screwdriver wasn't able to stab in enough to get a grip and it would slip out. After MANY attempts I ended up using a retractable razor blade and pried it out with that. FYI
Fox, for your RP2 rear shock, is there any seal required for the eyelet side? I didn't see one when I dissembled because there is a metal shoulder internally instead. Otherwise, great video and I got my 2007 stumpjumper back up and running in about an hour. Thanks!
Great video, but how do you remove the spacer bar that's attached through the rear eyelet? I have a Marin bike and they have this spacer bar fitted which prevents the air sleeve being remove when in place. Any advice gratefully received...!
There's one extra ring on the table--I looked back thru the vid and it appears to have come out of the new package. What's it for? Maybe an extra that was packaged?
I have a '08 Fox RP2 shock that has leaked most of its oil through the propedal switch. The shock still bounces, but I have no rebound. Would replacing the seals solve my problem?
my bike is a 2013 model and it's just stock at home because my rear suspension is no longer loaded with air. what is the possible reason and what needs to be done to fix my rear suspension. Thank you, I hope you can help me with my problem. my suspension is fox rp23 boost valve. 160
i have a dhx5 air i think it had never been serviced in its hole life... its loosing a litle bit of pressure so im going to service it... its one of the first dhx5 air that had come out lol 8-40 hours yeah right lol
Hi M8 Is there any reason why my rebound adjust dial is very hard to turn...? My shock is an RP2 (2010) and its a less than 3 months old... Thanks Jason
I have an 07 triad RPL, It's leaking oil from the rebound adjustment and the propedal is stuck on open. earlier this afternoon the propedel knob was spinning freely without catching open, propedal, or locked. How bad is this problem?
Got a huge problem here. I can't even do step 2. After succlessfully (...) doing step 1 (removing all the air), I can't even untread the big reservoir. I clamp the eyelet and twist, but it just keep twisting without catching anything.... What's wrong?
where do i get an adapter for the negative air valve?? i just gave my shock a full service, change the old oil and the seal on the if p. just found out all my negative air valves will not fit :( thanks
I am running a RP23 in my Trek Slash 2012 Enduro Bike and would like to reduce the air volume of the shock. What spacers (model / no) can I use to reduce air volume? cheers
Plz help! I have a Fox float rp23 like the one in the video, but when I use the lockout or the rebound control, everything stays the same. I have tried multiple things but to no success. Any help would be much appreciated.
Thanks, mine holds air but has traces of fluid on the shaft that I have to wipe off every now and then, but my propedal / lockout and rebound is not working, I don't think this will help??
That most likely is due to an o-ring in your propedal assembly that has gone out, meaning it needs an ifp service. Fox will do it for about $130-$150. If you do it yourself it will take a few hours of research(some of the specs and o-rings are extremely hard to find), as well as tools, but will still cost you less than $100.
Hi, I have an RP3 that keeps getting stuck down. I followed the procedure to open it in a vice with a rag through the eyelet, cleaned and lubed everything. The airchamber doesn‘t leak air but the shock compresses more each time and doesn’t fully extend i.e. gets stuck down again. Anyone have an idea what causes it? Will an air chamber service with new seals do the trick or is it a waste of time? Thanks
Still love how Fox calls the air chamber reseal a "rebuild" playing into consumer ignorance who don't think about the damper section. Meanwhile, the Monarch has even a video on how to rebuild the entire shock, including damper.
PLEASE- tell us how to remove the boost valve, or at least reduce the compression damping early in the stroke. They aren't nearly as good on small bumps as your old shocks. Position sensitive damping should only ramp up at the end of stroke, and have LESS compression damping near the sag point. If you prefer more compression damping at sag for pedal efficiency, ProPedal already provides that. The as-is ride on this shock is unacceptable for anyone but a racer. Please help- disappointed.