Floor Pan Replacement Begins! - Restoring a 1979 Camaro - Part 3

Подписаться 14 тыс.

Просмотров 10 тыс.

50% 1

In this video we finally start doing some metal work on the camaro, we first stripped the interior out, and then fabricated up the patch pieces to weld in the passenger side! Can't wait to start on the driver's side next!
FOLLOW OUR INSTAGRAM @kehm_crew
( / kehm_crew )
Thanks for stopping by and watching our video! Please feel free to like, comment, and share with others in the automotive community to help spread the word about our channel! Also if you haven’t already, please subscribe for future car & truck related content!
Go support the music artists: \m/
Cali by Wataboi / wataboi
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/wataboi-cali
Music promoted by Audio Library • Cali - Wataboi (No Cop...
Travel - JayJen & tubebackr
/ jayjenmusic
/ tubebackr
Creative Commons - Attribution-NoDerivs 3.0 Unported - CC BY-ND 3.0
Free Download / Stream: bit.ly/l_travel
Music promoted by Audio Library • Travel - JayJen & tube...
First Light - Atch / atch-music
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/-first-light
Music promoted by Audio Library • First Light - Atch (No...
Me & You by MusicbyAden / musicbyaden
Creative Commons - Attribution-ShareAlike 3.0 Unported - CC BY-SA 3.0
Free Download / Stream: bit.ly/_me-and-you
Music promoted by Audio Library • Me & You - MusicbyAden...
Song: SKANDR - Wanderlust (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: • SKANDR - Wanderlust (V...
Outro tracks:
By Free HARD Bass Beat (prod. BeatsByExergon) • Video

Авто/Мото

Опубликовано:

4 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 61

@osphateb9714 10 месяцев назад

Beautiful car! Something about that green on green.

@Mr_Primus84 2 года назад

A mystical bond between man and machine

@thekehmcrew 2 года назад

Nothing better, it’s unbreakable 💪🏻 thanks for watching!

@justinwoods240 2 года назад

Welds don't need to be perfect, as long as they hold they are golden. 👍🏻 you sure weld better than me. Can't wait to see the finished product!

@thekehmcrew 2 года назад

Thanks man! All it takes is practice lol! Hopefully the driver side turns out a bit better. I don’t think I had my settings adjusted properly lol

@justinwoods240 2 года назад

@@thekehmcrew little bit hot in the welder. I seen you where burning through a bit

@mossranchoutdoors7249 Год назад

@@thekehmcrew did a great job on the welding imo

@MrKrazybean Год назад

No worries man. You did great and looks like you are having a great time. I have a 1979 Camaro LT RS with T-Tops. She needs new floors and you just inspired me to do it myself!!!! Thanks

@thekehmcrew Год назад

Nothing will make you prouder than saying “I did it myself”.. even if it’s not 100% perfect, practice will eventually make it perfect! I’m having a great time working on this car.. just a little bit of prep work left to go, and I can finally start piecing back together the interior and I can’t wait to share it with you guys! Thanks for watching and good luck on your build!

@frz86_dylan81 6 месяцев назад

i just got one a littie bit ago for 200$ vin matching engine and everything. me and my friends trying to rebuild it. these vids definitely encouraging me

@Cholera-jb2kg 9 месяцев назад

Very cool, to see not always the Kardashian`s type lifes. Normal Americans at work - thats the "real" America God bless You....and best wishes!

@thekehmcrew 8 месяцев назад

We keep things down to the basics here! Lol, glad you’ve been enjoying the videos! We appreciate the support and Thanks for watching!

@andrebrooks7040 2 года назад

Just picked up a 78 z28 clone need to patch two areas under the seats. Thanks for a great video, I feel confident tackling that issue and getting her sealed up!

@thekehmcrew 2 года назад

Sounds like a nice car and fun project! Good luck on your patch work! I’m in the process of finishing up the driver side floor pan atm! Thanks for watching!

@joseavalentin541 Год назад

Me Encanta tu Proyecto! Éxito y Bendiciones desde Puerto Rico!

@mikebestick998 2 года назад

Right up!!!!!! One step closer

@thekehmcrew 2 года назад

Got that right! Can’t wait to knock out the drivers side next! 😎

@1999evo1 2 года назад

Seam seal over all the welding on the inside after priming spray on tar on the bottom side after cleaning up with grinder .... Keep up the good work mate ! Great video .

@thekehmcrew 2 года назад

That’s the plan! Thanks for the support and Thanks for watching!

@raphaelhernandez4088 2 года назад

Just found out about the camaro cool I had a 81 Z28 black red stripes t tops automatic wasn't fast but a fun car I know you like mopars I have a 96 Indy ram I've had it for 17 years love the videos thanks for sharing.

@thekehmcrew 2 года назад

The camaro will be a fun project, nothing too involved. I like all cars but I definitely like my mopars for sure lol! Thanks for for watching!

@jessicahillard2741 2 года назад

cool video! wow a man w many talents

@thekehmcrew 2 года назад

I guess you can say that lol 😎🔥👍🏻

@weasal20 11 месяцев назад

Thanks for the video, i have a 78 trans am that needs floors and under seat patches.

@thekehmcrew 7 месяцев назад

Glad you enjoyed the video, the camaro build has been on the back burner for awhile now, I need to get back on it soon. Had alot of personal stuff come up. Hope to get some more videos made of it here coming up. Thanks for watching!

@michaelanthonyoutdoors 2 года назад

Hellllllzzzzzz yea man!!!

@thekehmcrew 2 года назад

Glad to finally be making some progress on it 💪🏻😎🔥

@gibsonexplorer8777 Год назад

Your welds look fine for the floor and you but welded it to thats all i do now been mig welding cars for three years now your doing great good video

@thekehmcrew Год назад

Hey thanks I appreciate the support and Thanks for watching!

@daleprice8161 2 года назад

Don't feel to bad get better over time

@thekehmcrew 2 года назад

Got that right, hope the driver side turns out alittle better lol! thanks for watching!

@daleprice8161 2 года назад

@@thekehmcrew Plus I love that car my brother had one identical he got dumb and let it go what a shame lol

@victorrivera2985 2 года назад

@@daleprice8161cuanto.baale

@funonoldwheels7150 Год назад

Cool project. I have a '79 Z28, and stumbled across your channel by accident. Keep up the good work. Also, I love your little neighborhood, quiet and in a valley by the looks of it. Paradise. Roughly where are you located?

@thekehmcrew Год назад

Hey thanks I appreciate the support! Hope you’re enjoying the videos! I have some more in the works I’ll be uploading here soon! I’m a short drive south of Pittsburgh! Thanks for watching!

@funonoldwheels7150 Год назад

@@thekehmcrew hey, I kind of thought you would be in that general area. I love that area, been to Pittsburgh for hockey a few times, and I always love the drive down from Canada.

@ProjectRebuildLLC 2 года назад

What welder are you using? Also, very clever choice of replacement metal!

@thekehmcrew 2 года назад

It’s an older mig Lincoln Electric model. Not sure how old it is, my dad had it for years, and thanks! It’s Always nice having pieces of metal laying around to use for projects like this! Never know when they might come in handy lol! Thanks for watching!

@MuscleCarMike 2 года назад

@@thekehmcrew excellent video

@brandt_murphy_garage 2 года назад

Looking great brother. Want to work on an 83 Firebird? 😂😂

@thekehmcrew 2 года назад

Thanks bro! Like I said I’ll do body and metal work, you handle the mechanical stuff haha

@sblsbl7600 2 года назад

The welds will be under the carpet, so as long as you have it water tight who cares. You are getting it done. Are you going put some paint on the patches from under the car? The roof survived the winter nicely. I bought new carpet for my 01 Dodge 3500 and paid 500 to have it installed. You will be pleased at the difference new carpet makes.

@thekehmcrew 2 года назад

That’s true about the welds, I’m just trying to practice with it and get them set the best I can. I got all the pin holes welded up and it’s patched pretty good for my liking. Hopefully the driver side will be a bit better lol. I will eventually get the under side welded and sealed once I get it up on a lift. I know the new carpet will completely change the interior of this old car lol! Thanks for watching!

@7thesb 10 месяцев назад

What kind of paint did u end up using to brush on? Im doing a 1977 camaro and will need a new floor pan on the drivers side

@thekehmcrew 8 месяцев назад

I just used rustoleum red/brown rusty metal primer. It comes in a spray can or brush on.. Even though the metal is new and not rusty this has been my go to primer for jobs like this. Its also easy to top coat. I primed my grandfathers truck frame with it and it’s been sitting outside for years now and not a spec of rust returned! Hope that helps and good luck on your build! Thanks for watching!

@7thesb 8 месяцев назад

@@thekehmcrew yes, thank you

@rayladd856 2 года назад

no criticism from me, you will never see the weld spots when the carpet is put in and you did a really good job

@thekehmcrew 2 года назад

Thanks man, I appreciate that. I know it’s not perfect but good enough for my liking lol, not bad for not welding in several years. Hope the driver side will be a bit smoother now that I practiced on the passenger side! Thanks for watching!

@ivanbar1282 Год назад

Good job welding the patch panels i know how to weld n i wouldnt attempt it lol how about another video on the car?

@thekehmcrew Год назад

Thanks man, I appreciate it.. not the best welds by any means but practice makes perfect. I do have another video in the works on this car, so stay turned for that! Thanks for watching!

@alimorris2002 2 года назад

Great Did you paint under the car? It is more exposed to water and mud

@thekehmcrew 2 года назад

Haven’t gotten around to that yet, once I get the car up on a lift eventually I’ll be cleaning up the entire under side of the car! Thanks for watching!

@alimorris2002 2 года назад

The second generation has one of the most beautiful designs in the world of cars It is really pleasure for me to see any repair and reconstruction in this model Thank you for sharing your experiences with others

@SuperKittenLvr6626 2 года назад

I know you said your still just a rookie with the wields but, Jesus were they rough, you weren’t lying atleast 😭 But you’ll get better with time for sure

@thekehmcrew 2 года назад

Lol I know, I’m not afraid to admit it or try to hide it 😅 but practice makes perfect. I haven’t welded since high school so it’s been several years now.. hopefully I can get the driver side patch to flow alittle better! Thanks for watching!

@jaylozada3407 2 года назад

👍

@thekehmcrew 2 года назад

Thanks dude!! 😎🔥💪🏻

@asiasi3149 Год назад

Great job. floor pans or any welding on a rusty cars suck. Definitely need to turn the heat up on those floor pans. That is why your weld is coming out so high and not flat. As far as grinding. It looks like you were starting off with a cutting wheel. EXTREMELYYYYYYY DANGEROUS to use for grinding down welds, even more dangerous without a guard. Look for a sanding pad or flap disc to grind those welds down. 80 grit will take that down right away and nice and smooth.. Keep up the good work 🍻🍻🍻 please don't use that wheel again for grinding 🙏

@gearhead2017 2 года назад

The best welds? They look like staggered dimes overlapping each one,don't feel bad,your a beginner w welding,when I welded stuff I used oxy/acetylene nothing like today's standards,old school,pretty good at brazing too

@thekehmcrew 2 года назад

Stacking dimes would be great lol, hopefully I can get the driver side to turn out alittle better! Practice makes perfect! thanks for watching!