Flow Control Valves in Hydraulics - Full lecture with animation

Подписаться 119 тыс.

Просмотров 283 тыс.

50% 1

In hydraulics, flow control valves are used to control the volume of oil supplied to different parts within a hydraulic system. This way, the speed of a cylinder or the rotational speed of a hydraulic motor can be controlled.
What you see in this video:
0:31 Overview hydraulic flow valves
1:12 Function of simple throttles
1:43 Volume flow within the system
3:30 What´s the difference between throttle and orifice?
4:25 Pressure compensated Flow Control valve
5:56 Positive and negative load or: Location Flow Control valve
7:48 Examples hydraulic circuits with flow valves
More information about hydraulics you get on our webpage:
learnchannel-tv.com
Our Engineering Tutorial Video Channel. Topics covered: Electric motors, Robotics, Hydraulics, Pneumatics, Sensors in the field of automation.
More stuff about hydraulics you get on:
learnchannel-tv.com
Our official website: learnchannel-TV.com
Like us on Facebook:
/ learnchannel-tvcom-174...
Contact: info@learnchannel-TV.com
Music by: Adam Vitovský Link: ru-vid.com/show-UCLez...

Наука

Опубликовано:

28 янв 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 33

@didacticservices 2 года назад

Very well made video! Animations are just on point, able to give learner a better view of what is happening inside the valve.

@learnchannel-TV 2 года назад

Grüsse nach Deutschland Stuttgart - Denkendorf. Freue mich auf Zusammenarbeit.

@katumbajoshua9136 Год назад

Thanks for the video it is a good one

@jujurituhebat7575 3 года назад

Easy to understand thks sir

@romulolopessouza2441 4 года назад

Muito legal essa apresentação, vai ajudar muito o entendimento dos futuros profissionais.

@learnchannel-TV 4 года назад

Obrigado a vc

@chimrana8323 3 года назад

Nice video

@jaynealgofast Год назад

Hi and thanks for the info: I am building a test stand to test the load over distance in a shock. We want to move the shock at different loads to determine the resists and be able to adjust the pressure to act as different spring rates, what type of valve would we need to make this work.

@MrMariobalotelli45 4 года назад

thank you very much

@learnchannel-TV 4 года назад

thanks

@shivasmart967 2 года назад

tq sir

@ParsMermer 4 года назад

Thank you bro👍

@learnchannel-TV 4 года назад

Thanks you

@masumahmed7978 5 месяцев назад

nice

@jeonellemingi5130 Год назад

Hi, what is your recommended type of hydraulic we can used in extracting the coxonut milk

@stuarth43 2 года назад

nice, can you assist, I have a very pro made power pack, made by KA ME WA Finland, I have almost zero flow and little pressure, possibly the rotation was wrong for a minute, but the pump is load sensing, wonder if the shaft seal blew with reverse rotation could I block the LS port on the valve block, see what happens? the solenoid valve opens, I use lever controls to feed 3 rams, one motor, the pressure comp flow valve is before the 4 valve lever block as I wanted to slow it all down, really need help here, thanking you there is zero press at the gauge, one ram will creep, motor and other cylinders do not move

@runbou3019 3 года назад

អគុណបងthank

@learnchannel-TV 3 года назад

Tnanks

@DolittleMccoy 3 года назад

Can someone help me with a question? I'm not real familiar with hydraulic details... I build a small tow behind backhoe/trencher.. It is powered by a 6.5hp engine and I'm using a 2 stage log splitter pump. (11gpm) 2gpm on stage 1, and 9gpm on stage 2... My problem is the speed of my cylinders are super fast. So fast that it makes it almost impossible to operate... I'm wanting some type of valve to slow all of my cylinders down... What type of flow valve do I need? I'm currently looking at a 0-11gpm hydraulic flow control valve from northern equipment.... It's the type that has three ports and a little lever that can be moved to open and close the flow. Can someone please give me an idea of what I need to purchase... Thanks

@wallraven55 Год назад

Nice jump scare

@syedpullankottummal6930 3 года назад

👍

@almantasmedelis739 2 года назад

owerheating oil. if you close oil, in oil flow control valve.and need 150bar but low flow. some schematics please

@madddin3120 2 года назад

what the relationship of FCV setting and the speed of the hydraulic cylinder for extend and retract operation?

@hydraulicsystemworkrepairi1368 Год назад

#wekeephydraulicmoving

@shivam8434 2 года назад

Hey can you tell me which software will be best for designing 3d model of hydraulic press, deep drawing hydraulic press and other hydraulic presses?Tell me both top paid and free software separately. I hope you'll reply me soon as it will be really helpful for me. Thank you.

@learnchannel-TV 2 года назад

I cannot tell you which software is the best. I for myself use Blender.

@shivam8434 2 года назад

@@learnchannel-TV I mean can you name some free software for the same which are good in your view...