Flush Rail Gen 3 Prorack Roof Rack Installation Video

Подписаться 528

Просмотров 33 тыс.

50% 1

Simple, step-by-step instructions on roof rack installation for the Prorack Flush Rail Mount Roof Rack Gen 3. With this roof rack installation video you'll have your roof rack installed and be Ready For Anything in no time at all.
Gen 3 fits, the clip/clamp will, in most cases, clamp onto the outside of the lip of the rail (you will see this piece at the 1:50s mark of this video).
Gen 2 flush rail fit, the clip/clamp will, in most cases, screw into the inside of the rail - Fit video for Gen 2 here • Flush Rail Gen 2 Prora...
Please note: Before starting, ensure you have the FITTING KIT for your specific vehicle and the ROOF RACKS. Fit Kits and Roof Racks are sold separately.
If you are unsure what fit your vehicle needs, visit our website
www.prorack.com.au or
www.prorack.co.nz and use the "Find my car" function.

Опубликовано:

6 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 16

@neilsavage1298 7 месяцев назад

Hi folks - I just used this fitting kit K325 on my 2010 Outback. It didn’t come with the 8 coarse thread screws for the feet, but everything else was fine. Are the pins necessary?

@Prorack 7 месяцев назад

All our fitting kits are vehicle specific and may not have the same kit components as the one in this video. Please let us know if your kit was missing any of the components as per your K325 instructions. www.prorack.com.au/sites/aufiles/files/instructions//K325.pdf www.prorack.com.au/support

@neilsavage1298 7 месяцев назад

@@ProrackThe kit was complete as per the instructions provided; and the rack is now mounted nicely on my car. All good. Yakima australia have noted that the video is generic and to follow the instructions in the K325 kit, which I have done. Those instructions do not include a coarse threaded screw.

@5punkybob 3 года назад

i just installed there on my outlander... why do my roof racks have a slight bend to them? for can i install a flat bottomed cage if they have a slight bow???

@Prorack 3 года назад

Hi Pierre, sorry we missed this message. If you'd like to send some photos through to our customer service team on sales@prorack.com.au they'll be able to assist you further.

@beatsntoons 3 года назад

Hi @Pierre. Was this ever sorted? I am looking at these for my Outlander as well. Cheers

@michaelvitucci2338 2 года назад

Hi what kit# was this for outlander please?

@Prorack 2 года назад

@@michaelvitucci2338 Hi mate, depends what year model you have. You can see all our fits via our Fit Finder on the website this link will take you too a more recent fit but you can change if yours is an older model. www.prorack.com.au/cars/mitsubishi/outlander/2019/5doorsuv-150903

@pauljones6264 2 года назад

I have a 2022 Outlander and need the same fixing as they don’t have the two bolt holes in the inner rail like the 2021 models. Could you please tell me which kit this is?

@Prorack 2 года назад

Hi Paul, we've literally just completed the fit for this vehicle and the Kit will be K1218. This is still a few months from hitting the shelves though but you can pre-order through your local dealer.

@ricr.4669 2 года назад

No drilling?

@Prorack 2 года назад

Hi Ric, not for this fit. Your rail will have 1 or 2 small holes already in the rail that the bars with the appropriate fit kit will fit into.

@barryfigel9957 3 года назад

Will it fit a 2021 Kia seltos

@Prorack 3 года назад

Hi Barry - you can find all your fit details here - www.prorack.com.au/cars/kia/seltos/2021/5doorsuv-150970

@michaelvitucci2338 2 года назад

What fitting kit # is this please?

@Prorack 2 года назад

Hi Michael, What vehicle do you have? This video shows a flush rail fit and there could be slight differences between vehicles. All our kits are vehicle specific.