Flying Mustang P-51D Rubber powered free flight 

That "fly by" was pretty GREAT!

Bravo! It’s quite an achievement to have a model that both looks good and flies good. The custom four bladed prop looks awesome!

Did not expect such graceful flights from a mustang....it flew fantastically.

Great job on the build and the flight. Thanks for shooting and sharing your video.

Excellent. My favorite WWII airplane

Thanks for sharing this project with us. The P-51D looks fantastic and even better in the air.

Amazing how the speed seems to be to scale. Beautiful model!

I'm just finishing constructing my P51 from the Vintage Model Company. Watching him wind up the rubber band I had no idea that is how it is supposed to be done ! Pity he didn't show some of the construction and trimming it up before his first flight. It's amazing how far it can fly just with a rubber band.

Love it; I built the Guillow's P-51D model. I combined and balanced two two-blade props into one four bladed prop to propel it with a rubber band... it worked flawlessly; well, until the band eventually broke and ripped through the side of the plane. But before that, it had tremendous power and flew perfectly. It stinks that lightweight four blade props; let alone, any useable four-blade props are hard to find for rubber-band planes. Yours looks incredibly nice.

Perfectly built and very good flight. 👍👍👍

Very well done! That second flight with the low pass looked like a real aircraft. Always a thrill when that happens. Nice covering job.

That was beautifully made, and I flew amazingly well.

Full of motivation, very beautiful, I like it so much

What a beauty. Grüezi von AUT nach CH. Ihr hattet immer schon eine wehrhafte Luftstreitmacht.

Very,Very Nice flights..Thanks for the view..

Fantastic, the drawing out of the rubber band before winding is a brilliant idea. Almost 50 years ago I built a j87 Stuka. may have been a guillows kit, 3 months to build 7 seconds to destroy. only 11 at the time knew nothing about flight. Hoping to try again. Thank you.

Beautiful. I especially like the propeller. Great achievement .

Just beautiful! thanks. Tom

Very cool and nice!!

Cool! Love that four bladed prop!

One of your fans here from Slidell, Louisiana. Your workmanship is fantastic, and your flight trimming skills are superb. Hope to see more from you!

Wow ... that flies very well! And that four bladed prop seems to work a treat. Just excellent!

Beautiful flights!! I didn't got where to find this model!? Thanks for the show!!!👍👍👍

Wow, your Mustang flies so fast that you need to build a Messerschmitt to be chased :D Nice model and video, thank you!

Beautiful. It flies as nice as it looks.

A lovely model, well done. Next a ME109 in Swiss colours 😀🇨🇭

Great plane and video.

Looks great in your hand, looks great in the air. Beautiful job.

Wow that is amazing wonderful flying and looking airplane!❤

Nice model and flights. Looks like a fantastic field too

Fantastico modello! Bravissimo!

Pretty cool. I was impressed by how steady and true it flew. Nice job!

Love the propeller, beautiful plane buddy ❤️

Super gemachter Film, gratuliere. Musste Deinen Kanal gleich abonnieren. Gruss, Markus

Nice model. Flies well and looks great.

Looks like a West Wings kit that I built 15 years ago. It too was flown with a four blade prop. Good job!

Super nice Mustang !! 😃

nice job

Very nice mate.

It flies very well, complete with a scale glide slope angle. ;)

Perfection

a great flier, well done!!!

This looks like a lot of fun for a 6 year old child, nice

2:19 is so realistic that I found myself imagining Merlin sounds!

It has a real tendency to a hard banking left turn. This could be a result of the heavier 4 blade prop having more angular moment of inertia. Maybe shim the left side of the prop a little more to compensate. Beautiful plane!

It flies just beautifully bravo

You can't immagine how happy I am about your channel. I use to built Guillow's kits sometimes as relaxing duty. The problem was to find again colored tissue. Thanks to you I found!! Subbed and best wishes Nanni

This is great. Love your dedication and your bike!

What a wonderful job, loved the fly by. Can you make and fly the Sopwith Camel? 🙏

Beautiful flight!

que bien vuela!!!

Perfect trim!!

Absolutely beautiful

Super cool!

Perfect!

Lindo trabalho , linda bike também !!! Parabéns

Man that's awesome! Flying low and fast like that, looks like a Reno racer... Quick, do a Strega or Voodoo!

Gruezi miteinander! und zwar aus Kalifornien. Great model great flight ...would be nice to see how you built the prop! Hut ab!

Toller Flug! (Grüße aus Amerika)

FANTASTIC!

Great looking plane

Very nice.

beautiful..

Fantastisch! Sie sieht wirklich aus wie ein Mustang - schönes Design vom Bausatzhersteller und schöne Verarbeitung von Ihnen. Und Ihre Video-, Audio- und Bearbeitungsfähigkeiten sind vorbildlich. Fantastic! She really does look like a Mustang - nice design by the kit maker and nice workmanship by you. And your video, audio, and editing skills are exemplary.

Excellent!!

Very nice job!.....

This is great work ! I like to see a rubber band powered multi rotor for example P38 F lightening from DUMAS that would be something no RC no batteries completely passive dynamic

Beautiful!

Wow, what a nice youtube channel, and amazing videos there! I love those aircrafts, here in Czechia we are calling this type of small airplane model ,,Gumáček". I was also making some aircraft models, I have respect from airplanes and aviatics, it is my hobby. Greetings from Czech Republic, JB.👍✈️✈️

Great Job

What a beautiful model and what a flight! Two questions; how did you build that four bladed prop and what did you make your winding stooge from? I'm 61- have never flown a model and would like to.. Thank you for sharing Steve

cool

Sweet ebike! What a fantastic flyer. Will you make a build video for that propeller?

I was expecting to see Julie Andrews singing that the hills are alive with the sounds of music. Fantastic, loved it and I must build it. Cheers, what country are you in a couldn’t pick the language? 🇦🇺👍🍺🍺. 🇺🇦🇮🇱🫡

Very beautiful work and flies really well. Regarding the propeller: how did you calculate the diameter and pitch? Are they similar to the original two blade prop? May you describe us how did you build the four blade prop? Thanks, Stefano

Very Nice! SO fast. Lower pitch props might get you more climb, plus a little less speed. Fast, like a pylon racer, come to the US and enter it in an FAC blur race... if you can get it to fly straight.

Looks dramatic in the air. I’m a bit surprised that huge prop doesn’t break on landing.

Beautiful flight! I'm curious... how does it fly with the inbox two bladed prop? Beau vol ! Je suis curieux... comment vole-t-il avec l'hélice à deux pales de la boîte de réception ?

She's a LOOKER

Such a beautiful P-51!, im making a P-39 in the same scale, ¿which is its weight?(to use for reference, always have troubles with that😅), Thanks!!

I believe I’m back again, I might buy a Vmc P-51 like yours, did you use the tissue from the kit or your own? It looks great.

Envious of that propeller

!!!!Four-bladed prop!!!!!

...can you show us how you build the four blade prop? Thanks!

Great job! Can I ask you how do you achieve the circular flight of the plane? Thank you.

Great model :-)) How many turns did you put on the rubber??

What was the kit available to wind the rubber band up, is there a written technical document on this we can access…

I have tried to build 3 different guillows free flight kits and non kf them turned out good or the parts broke when trying to carefully cut them off the sheets thst are pre cut even the laser cut one indid came out nkce but no katter what i did couldnt get it to fly at all even with new rubber prop and a balsa head block

Are the wheels of the model just for decoration?

how did you get the 4 blade propeller? nice swiss livery!!

How did you make the pilot?

nicely done.