FLYSKY mini 4channel receiver(FS2A) Review & How to bind _ 제품리뷰 & 바인딩 방법 

Hiya, on all rx now you to connect the esc to channel 3.

I'm really glad that my video was helpful. It's also a joy for me, and it's why I make videos. I hope you enjoy the fun RC hobby...^.^

@@creativechannel9368 thank you and of course I will enjoy getting back into it. Been a long time but I am so looking forward to it.

Most 'failures' seem to arise from very minor problems. I am so happy that my video has been of interest to you too. Have a nice day....^.^

@@creativechannel9368 Thank you for taking time to reply. I think you have educated quite a few modellers. Brilliant vid. Thanks and happy flying Peter

Thank you Bro...^.^

I'm glad my video was helpful to you too. I hope you have a happy day today...^.^

I'm glad it was helpful. Have a nice day today...^.^

Thanks...^-^

You're welcome...If it was helpful to you, I'm happy too...^.^

I tested it a while ago, so I can't remember exactly, But, I think it was probably 1806-2400kv...^.^

In the video above, I never reconnected to channel 2 after binding was completed... I'm not sure what question you're asking. ESC was connected to channel 3 to check motor operation, and a servo was connected to channel 1 to test the operation of the servo...^.^

Thanks...^-^

Well...the most important thing is to make sure that each part is well connected. Take a look... There is a high probability that there was a very minor mistake somewhere...^.^

I know spray-type products for waterproofing electronic components are on sale, but I have not tried it myself. To be more precise, I haven't felt the need in particular yet. If you are planning to make 'Boat', the video below might be helpful...^.^ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-q7-mOzXQUjk.html ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-07r8ielacPY.html

@@creativechannel9368 thank you @creative channel This is superb helpful

The BEC I used in the video above was 12A. Of course, it will work even if you connect it to the Skywalker 20A bec 5v 2A product you inquired about. However, it should be noted that the weight will be slightly heavier. As you are well aware, in the case of a flying airplane, it is important to make it as light as possible...^.^

Nice to meet you...^.^ The receiver introduced in the video above can be used not only with coreless motors but also with brushless motors. Therefore, you can use an ESC (for brushless motors or coreless motors) suitable for the type of motor you want to use. To elaborate, the receiver can be used regardless of the type of motor. Therefore, depending on what type of motor you want to use, you can use an ESC suitable for that motor...^.^

Hi... I've been using this receiver for a long time, but I don't know the exact solution, perhaps because I've never felt the need for the question you asked. Sorry for not being able to help you...^.^

@@creativechannel9368 I figured out what to do! failsafe on the console does not need to be configured. just set the desired position of the sticks and press the button on the FS2A 4CH receiver, the receiver will remember these positions and apply them when the connection is broken

@@user-ui2gf2gw6b There was such a function. I also get to learn something through this opportunity. Thank you...^.^

Yes, of course it can be used on drones as well. However, the above receiver has 4 channels. Therefore, it cannot be used on drones (this also applies to airplanes) that require other operations or functions of more than 4 channels...^.^

@@creativechannel9368 Wow you are the only person whom has replied to me with enough information, thank you so much, up till now everyone on retail platforms has informed me I cannot use it for a drone at all. I’m only building a 3inch drone as a starter for fpv and will literally only want to learn how to fly with it and get into the hobby, so I bought this receiver but I thought I was stuck with it as I’ve been told I cannot use it. It should be fine with what I intend for a 3inch build yeah? Thanks heaps. And your content is so informative 👍🏼

@@anthonypaladino2680 You're welcome. A 3-inch drone would be very cute. I hope you create wonderful works. I will too...^.^

아닙니다... 위에 1번과 2번의 수신기는, 모양이 동일하지만 각각 적용(호환)되는 조종기의 타입이 다릅니다. FlySky 와 FrSky 는 서로 다르거든요. 본인이 보유하고 계시는 조종기에 적합한 수신기를 사용하시면 되고요... 납땜의 여부는, 여러번 구입을 해봤던 제 경험상... 아마도 대부분 납땜이 안되어 있는 상태로 판매가 되는 것으로 알고 있습니다. 그래도 혹시 모르니, 검색을 해보신다면 납땜이 되어 있는 제품을 찾으실수도 있겠죠?...^,^

@@creativechannel9368 자세한 설명 감사합니다. 워낙 저주받은 손꾸락이라서 기자재 선정에 엄청 힘들어도 덕분에 많이 배웁니다^^

@@true21cwoo 천천히 해보시면, 그리 어렵지 않아요... 감사합니다...^-^

네... 위 영상에서는 브러쉬리스 모터를 사용했기에, 브러쉬리스 모터용 변속기(ESC : Electric Speed Controller)를 사용했기에 모터와 연결되는 선이 3가닥 입니다. 질문하신 코어리스모터(브러쉬드 모터)를 사용하시려면, 코어리스모터(브러쉬드 모터)용 변속기(ESC : Electric Speed Controller)를 구매하시면 됩니다. 당연히, 모터와 연결되는 선이 2가닥이죠. 아래에 샘플 한 종류(제품)를 링크시켜 놓았습니다. 참고가 되실 거예요...^.^ www.aliexpress.com/item/4000357111911.html?spm=a2g0o.productlist.0.0.48d52a53RA1AsP&algo_pvid=f87de550-13d1-4b13-8be5-e41e1265ae97&algo_expid=f87de550-13d1-4b13-8be5-e41e1265ae97-2&btsid=0bb0623916212625987658350eeca5&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_ 또한, 아래의 4:48~5:20 까지의 영상 또한 참고가 되실듯 하네요...^.^ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-JD1OmI5VAp8.html

@@creativechannel9368 상세한 설명에 감사드립니다. 꾸벅^^

You can use with any regular ESC...^-^

@@creativechannel9368 thanks for replying, I'm confused that's why I asked

@@jonujangid3J ...^-^

Please refer as follows... 1. Please check Receiver type as you know, there are two kinds... one is for FlySky Transmitter, another is for FrSky Transmitter. 2. Please check Protocal type There are two types... One is ‘AFHDS’- Old version, another is ‘AFHDS 2A’- New version. You must check and change menu(your transmitter) before bind... I've used about 20 so far, I never met a defective receiver...^.^

@@creativechannel9368 Flysky FS2A 4CH AFHDS 2A Mini Compatible Receiver PWM Output for Flysky i6 i6X Flysky FS2A 4CH AFHDS 2A Mini Compatible Receiver www.aliexpress.com/item/4000405304912.html?spm=a2g0s.9042311.0.0.15d46c37xCQiDn The AFHDS function is on "On" then I follow the instructions of the video but the transmitter emits "Beeps" and does not connect! I don't know what else to do ... 🤔🤔🤔

@@mekateknik3717 Oh, I see... In case, check whether the soldering is done correctly or not. Or, If you are testing with a new ESC, it may have something to do with your ESC settings as well...^.^

@@creativechannel9368I am stupid !!! I managed to "bind" the receiver ... I'll explain! I was waiting for a message from the transmitter "connection successful" ... We just have to turn the transmitter off and on for everything to be operational! I realized this by chance when switching off and on after trying to bind transmitter and receiver ... I'm happy, I'll be able to use my glider ... And refund Aliexpress since they refunded me!

@@mekateknik3717 Good job... always have a fun flight...^.^

I remember it was 12mm(diameter)...^.^

Yes of course. Before purchasing, please check the version(module) and type(Flysky or FrSky)...^.^ * There are two version... One is for FlySky Transmitter, another is for FrSky Transmitter...^.^ 1. For FlySky Version www.aliexpress.com/item/40001... * For example, FS-I6, FS-I6X, FS-I6S, FS-TM8, FS-TM10, FS-I10 and other AFHDS 2A protocol transmitter 2. For Frsky Version www.aliexpress.com/item/32884... * Compatibility of Transmitters & Receivers www.youtube.com/watch?v=CZprz...

Its no working with h king 9x

@@gasperbucinel I don't understand why because they are all two AFHDS 2A

Me too but i tryed but it does not work, I don't know where is issue

@@gasperbucinel Thanks, so I am not the only one who observes this problem ! if anyone knows the causes we are two interested people.

Please refer as follows... there are 2 version... One is for FlySky Transmitter, another is for FrSky Transmitter... You can choice one of them...^.^ 1) For FlySky Version www.aliexpress.com/item/4000153209846.html?spm=a2g0o.productlist.0.0.418970caqvzOir&algo_pvid=e2850701-8066-44e3-a393-b09e4bac82a7&algo_expid=e2850701-8066-44e3-a393-b09e4bac82a7-0&btsid=0ab50f4415980585247021098edabc&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_ 2) For Frsky Version www.aliexpress.com/item/32884998553.html?spm=a2g0o.detail.1000014.11.5f0540f7vNwmNg&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.13338.183346.0&scm_id=1007.13338.183346.0&scm-url=1007.13338.183346.0&pvid=726cecbb-5a87-48a9-82d5-878f32c91529&_t=gps-id:pcDetailBottomMoreOtherSeller,scm-url:1007.13338.183346.0,pvid:726cecbb-5a87-48a9-82d5-878f32c91529,tpp_buckets:668%230%23131923%2349_668%23808%233772%23967_668%23888%233325%2317_3338%230%23183346%230_3338%233142%239890%239_668%232846%238109%23229_668%232717%237567%23941_668%231000022185%231000066059%230_668%233422%2315392%23328

@@creativechannel9368 Thanks.. ✌

@@charlesmilbourn6861 You're welcome... have a nice weekend...^.^

You can check Output signal(PWM) & Protocol(AFHDS 2A) before buy it. (Support : FS-I6\, FS-I6X\, FS-I6S\, FS-TM8\, FS-TM10\, FS-I10 and other AFHDS 2A protocol transmitter .) Please refer as follows... there are 2 version... One is for FlySky Transmitter, another is for FrSky Transmitter... You can choice one of them...^.^ 1) For FlySky Version www.aliexpress.com/item/4000153209846.html?spm=a2g0o.productlist.0.0.418970caqvzOir&algo_pvid=e2850701-8066-44e3-a393-b09e4bac82a7&algo_expid=e2850701-8066-44e3-a393-b09e4bac82a7-0&btsid=0ab50f4415980585247021098edabc&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_ 2) For Frsky Version www.aliexpress.com/item/32884998553.html?spm=a2g0o.detail.1000014.11.5f0540f7vNwmNg&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.13338.183346.0&scm_id=1007.13338.183346.0&scm-url=1007.13338.183346.0&pvid=726cecbb-5a87-48a9-82d5-878f32c91529&_t=gps-id:pcDetailBottomMoreOtherSeller,scm-url:1007.13338.183346.0,pvid:726cecbb-5a87-48a9-82d5-878f32c91529,tpp_buckets:668%230%23131923%2349_668%23808%233772%23967_668%23888%233325%2317_3338%230%23183346%230_3338%233142%239890%239_668%232846%238109%23229_668%232717%237567%23941_668%231000022185%231000066059%230_668%233422%2315392%23328 Please refer my previous video as follows...^.^ ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-CZprzS3GiNg.html

It was sufficient for use on the school yard or in a nearby park....^.^

그러시군요... 제품 불량보다는 아무래도, 납땜 불량일 확률이 큰 듯 하네요. 잘 점검해보시면, 다시 살릴수 있을 거예요... 암튼, 좋~은 작품 기대할께요....^-^

안녕하세요? DLG 이니, 모터는 없을테고요...서보의 구동을 위해서 필요하다는 말씀이시지요? 네... 말씀하신것처럼, 수신기의 한 채널을 선택해서(조향을 담당하지 않는 남는 채널), 직접 전원을 넣어주셔도 됩니다. (다만, 각 채널에 3개의 핀 중에서... 플러스와 마이너스를 잘 찾아내야겠죠?) 어차피, 모터가 없는 구조라면 변속기도 없을테니까요...^-^

@@creativechannel9368 답변 감사합니다! 납땜의 벽을 제가 넘을 수 있을지 ㅎㅎ

@@user-oh8ji1nb2l 충분히 가능하실거예요... "화이팅!"...^-^

You're welcome... have a nice day...^-^

@@creativechannel9368 have good day for you too)))