FN Reflex Micro 9 is Not for Me...

Подписаться 18 тыс.

Просмотров 1,1 тыс.

50% 1

Hello and welcome. Today we take a look at the ‪@FNAmericaLLC‬ Reflex. I first saw the Reflex at the 2023 NRA show at Indianapolis and I couldn't wait to get my hands on one. When I finally did, it was a bit disappointing. Please keep in mind that this is MY experience with this pistol. Sample size of one. Perhaps my experience would be different with a different sample but ‪@FNAmericaLLC‬ does not send me guns to review. So, I got what I got. I really, really wanted to like this pistol and for it to become my EDC.
What are your thoughts on the ‪@FNAmericaLLC‬ Reflex? I look forward to your comments.
Thank you for stopping by and God Bless.
Please remember that I upload videos every Friday morning and at times during the week as well. So click on that Bell icon so you are notified when I upload a video.
For additional content and photos you can follow me on:
Rumble: rumble.com/c/c-2322384
Patreon: / mdpologunchannel
Instagram: / mdpologunchannel
Twitter (X): @MDpoloTV
RU-vid Manual Reviewer: This video was filmed in a safe and professional environment and it is meant for educational/entertainment purposes. It is not meant for children. What all this tells you is that it checks all the boxes for an advertiser friendly video. Thank you.
Disclaimer: These videos are strictly for educational and entertainment purposes only. Imitation or the use of anything demonstrated in my videos is done AT YOUR OWN RISK. All work on firearms should be carried out by a licensed individual and all state and federal rules apply to such. We (including RU-vid) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any our videos. I do not endorse any specific product and this video is not an attempt to sell you a good or service. I am not a gun shop and DO NOT sell or deal in Firearms. Such a practice is heavily regulated and subject to applicable laws. I DO NOT sell parts, magazines, or firearms. These videos are free to watch and if anyone attempts to charge for this video notify us immediately. By viewing or flagging this video you are acknowledging the above.
Fair Use: In the rare instance I include someone else’s footage it is covered in Fair Use for Documentary and Educational purposes with the intention of driving commentary and allowing freedom of speech.
** Affiliate disclaimer: some of the above links may be affiliate links, which may generate me a sales commission.

Опубликовано:

16 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 32

@KennyRodgers930 Месяц назад

Some reviews say it's the softest micro carry, some say it's one of the snappiest... All I know is it's definitely softer than a Kimber Micro 9 lol I didn't have any issues for ~1k rounds (S/N 4xxx). The slide started to rust & I sent it into FN, they replaced it & had it back within a week. Took it to the range & had Light Primer Strikes at least once every mag using the same lot of AAC & BPS 124gr Id been using the whole time. Called FN again, explained how perfect mine was before they replaced the slide & they told me as long as it fires 124gr Federal there's no issue. So I went from having a perfectly functioning Reflex that shot amazing, to having a paperweight that only shoots one brand of ammo. The 500 series (509,510,545) are hands down my favorite striker fired pistols. The SCAR is hands down my favorite Piston driven rifle platform. The Reflex had the potential to be my favorite micro, but with the finish problems (they rust ALOT), LPS, and feeding issues I just can't recommend it right now. I'll try another one out when they hit year 3 of production.

@TheGunfighter45acp Месяц назад

Thank you for another honest review! Back when these 1st hit the market, an FN rep was at my range demo'ing them for the range staff. They were 2 lanes away from me and seemed to be having alot of jams.

@MackBradley 5 дней назад

I had one and sold it. It was reliable for me and felt better in my hand than any other micro, but for a carry gun I thought the trigger felt much too light. Everyone is different but that's what did it for me.

@usmc6429 Месяц назад

I’ve never been a fan of FN’s handguns and their response or lack there of is unacceptable for sure. I do love my SCAR 17S though…

@hansgruber6381 Месяц назад

You made a good point on the loaded chamber indicator. Smith & wesson m & p has similar style; i wonder if it does the same to optics.

@hixnada8278 Месяц назад

I’ve heard mixed things about this gun. What was the build date on the MRD reflex in the video? The extractor seems to be a sticky point and some issues were encountered as there wasn’t a radius on the lower edge like other pistols have. Regardless I think most of the issues people are having are just teething issues with a first year gun. PS - I just subscribed to your channel. Thanks for doing this review!

@RckTrckr Месяц назад

😂 FN does have poor customer relation service. With three different guns; SCAR16, M16 & FNX45 in three seperate complaints, they blamed me for “not adequately lubricating” the guns for the malfunctions they have exhibited.

@markchambers2812 10 дней назад

Fn s , you got grip it stronger, but it works . Keep training !

@MDpolo 10 дней назад

Respectfully, nothing wrong with my grip. Besides, four different shooters had the same issue with this particular sample. Thank you very much for stopping by.

@tigerman3 Месяц назад

I agree with your conclusion that since the pistol is marketed as an EDC arm, it should be more forgiving and universal when it comes to ammunition. However, I think you're not seeing the entire picture. You kind of hit on it when you mentioned "military contractor". They are engineering their firearms to MEET US DoD specifications for ammunition (124 grain 9mm). SIG's M17/18/P320 models are engineered in the same way. Who would you engineer your products for, the very small [and very competitive] civilian CC market or the DoD?

@kr5824 24 дня назад

I loved mine the first time I had it out to the range but after that the problems started. I simply could not get through a magazine without FTF issues, which occurred with both 115 grain and 124 grain ammo. I shipped it back to FN and their response was “shooter mechanics!” I have a wide variety of handguns and my “mechanics” seem to work well with each and every other gun I own. In addition, the internet is littered with other shooters experiencing the same issues, do they all have poor “shooter mechanics” as well? FN’s response was unacceptable and I very much doubt the Reflex will ever gain my trust as an EDC.

@MDpolo 23 дня назад

Same thing here. FN blamed everything under the sun except the firearm. Too bad because I was really looking forward to this one. Thank you for stopping by!

@thearmzmen Месяц назад

I like the look of FN models. I had the same issues in the beginning, but after about 100 rounds, mine has been good. I just wish FN would improve their triggers in the 509. Good info as always.👍

@RimfireAddicted70 Месяц назад

Did FN say not to use 115gr in the manual? I doubt it. Any factory gun today should run 115, 124, 147 factory ammo. Now some subsonic stuff maybe it might have trouble but that's a specialty load. I know you have proper grip, watched you for quite some time and have to say the opening firing of the pistol it looked under sprung. That muzzle never returned to POA after any shots fired. If I were him that is what I 'd be experimenting with and watching locking block for battering wear. If it's under sprung it'll show up fast.

@johndeere1951a Месяц назад

Your correct. The Owner's Manual pages 6 - 12 state to use SAMI and CIP rated ammo. No mention of bullet weight . It also stated to NOT use + P+ ammo.

@RimfireAddicted70 Месяц назад

@@johndeere1951a Yea +P+ isn't often allowed for any factory arm due to liability.

@vicgarb2288 Месяц назад

500 rounds or more are needed to trust a gun in any case, plus 200 or more of the actual carry ammo. Thank you for the review!

@johndeere1951a Месяц назад

I watched this 4-5 times and took in every word you said. I don't believe FN made any such ammo gr weight statements. I'd like to hear directly from the gun owner, and WHO he spoke with at FN. Facts please. The Owner's Manual does not state any bullet gr weight restrictions from page 6 through page 12. Only that SAMI and CID ammunition be used. And if anything, using an extended mag base extension allowing full three finger grip should improve target accuracy. I submitt it was pure operator error. You state you had no such accuracy issue. FN has been a quality firearm manufacturer longer than anyone of us have been alive.

@dannyp2267 Месяц назад

I agree about the CS, that’s unacceptable. That’s an easy way to lose customers it seems to me. I’ve had two FN guns, only one now, and had had no problems with mine so no personal experience with their CS, and based on what your friend experienced, I’m glad I haven’t. I’ve only seen one in the wild, the non optics model.

@joehassett1421 Месяц назад

Hey md. Can you do a video on the kimber micro 9 plsm

@Disastrous.Affect Месяц назад

I have not had the issues that I hear about and I have 3 of these pistols. I typically only shoot 124 gr because I have some carbines that don't like 115gr, so I don't bother buying it. I have 3 because the first one was the non MRD version and I wanted a dot. But I decided I wanted two tone guns, so I bought the FDE & black MRD versions and swapped slides and such.👍 I have only 3 complaints on these pistols. 1. Combat sight picture, I don't know why this has become the default sight picture.🤦‍♂ 2. Polymer guide rod... it is 2024, stainless has been available for eons and the weight is insignificant.🤷‍♂ 3. The loaded chamber indicator.... it's not needed and gasses my dot... But other than these 3 things, they are easily my favorite EDC, and the recoil is loads better than my OSP Hellcat.

@Scott079 Месяц назад

Never been a fan of FN pistols especially this one the trigger guard looks way too small to be able to get your finger in there comfortably, especially in a stressful situation

@RowdyElGuapo 25 дней назад

Could be user issue. Ammo requirements should be in the manual

@MDpolo 23 дня назад

It was not user issue. I’m not the best marksman out there, but I know what I’m doing. Also, 4 different shooters experience the same malfunctions well shooting the pistol that I featured in this video. Thank you for stopping by.

@jamescarter4175 28 дней назад

Many surprises here: The gun is not a striker-fired gun! FN's poor customer service. FN's recommendation to only use 124 grain, and not mentioning the recommended break-in period in the manual.

@MDpolo 23 дня назад

Yes, it was a disappointment all the way around for me. And we tried this pistol with all kinds of ammo. The results were the same. Thank you for stopping by.

@jamescarter4175 22 дня назад

@@MDpolo You're welcome. My pleasure.

@johndeere1951a Месяц назад

"No problem found" Perhaps it was poor hand fit, grip too short and limp wrist were the cause for issues. Lubrication? Be honest. I don't keep a pistol if It doesn't meet my expectations after 100 -150 rounds. You consign sell it and consider your loss as rent for your pleasure. 👍